ISO 13479:2009 流体输送用聚烯烃管材.耐裂纹扩展的测定.切口管材裂纹慢速增长的试验方法
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
GB/T 18476-2001 流体输送用聚烯烃管材 耐裂纹扩展的测定 切口管材裂纹慢速增长的试验方法(切口试验)
本标准规定了测定聚烯烃管材耐裂纹慢速增长的一种试验方法。管材耐裂纹慢速增长的能力用切口管材静液压试验的破坏时间来表示。 本标准适用于壁厚大于5mm的聚烯烃管材
Polyolefin pipes for the conveyance of fluids--Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test)
GB/T 18476-2019 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验）
Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test)
EN ISO 13479:2022 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This document specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms of time to failure
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
EN ISO 13479:2009 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This International Standard specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009)
BS EN ISO 13479:2009 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This International Standard specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
0 流体输送用聚烯烃管材 抗裂纹扩展的测定 切口管材慢速裂纹增长的试验方法(切口试验)
This International Standard specifies a method of test for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms
EN ISO 13479:1997 输送流体用聚烯烃管材.耐裂纹扩展的测定.有凹口的管材上裂纹缓慢增长的试验方法(切口试验) ISO 13479-1997
Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack Growth on Notched Pipes (Notch Test) ISO 13479: 1997
GB/T 13527.1-1992 软聚氯乙烯管(流体输送用)
本标准规定了流体输送用软聚氯乙烯管（以下简称软管）的分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以聚氯乙烯树脂为主要原料，经挤出成型的流体输送用塑料软管。该软管在常温下可用于输送某些适宜的流体
Plasticized polyvinyl chloride tubing for transport of fluids
ISO 13479:2022 流体输送用聚烯烃管.抗裂纹扩展性的测定.切口管上缓慢裂纹扩展的试验方法
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
SY/T 7415-2018 油气集输管道内衬用聚烯烃管
ISO/TR 7474:1981 高密度聚乙烯管道和配件.输送流体的耐化学性
High density polyethylene pipes and fittings — Chemical resistance with respect to fluids to be conveyed
GB/T 14291-1993 矿用流体输送焊钢管
Welded steel pipe for mine liquid service
GB/T 8163-1999 输送流体用缝钢管
本标准规定了输送流体用缝钢管的尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于输送流体用的一般缝钢管
Seamless steel tubes for liquid service
GB/T 8163-2008 输送流体用缝钢管
本标准规定了输送流体用缝钢管的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于输送流体用一般缝钢管
Seamless steel tubes for liquid service
ISO 13479:2009 流体输送用聚烯烃管材.耐裂纹扩展的测定.切口管材裂纹慢速增长的试验方法
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
GB/T 18476-2001 流体输送用聚烯烃管材 耐裂纹扩展的测定 切口管材裂纹慢速增长的试验方法(切口试验)
本标准规定了测定聚烯烃管材耐裂纹慢速增长的一种试验方法。管材耐裂纹慢速增长的能力用切口管材静液压试验的破坏时间来表示。 本标准适用于壁厚大于5mm的聚烯烃管材
Polyolefin pipes for the conveyance of fluids--Determination of resistance to crack propagation-Test method for slow crack growth on notched pipes(notch test)
GB/T 18476-2019 流体输送用聚烯烃管材 耐裂纹扩展的测定 慢速裂纹增长的试验方法（切口试验）
Polyolefin pipes for the conveyance of fluids—Determination of resistance to crack propagation—Test method for slow crack growth(notch test)
EN ISO 13479:2022 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This document specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms of time to failure
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2022)
EN ISO 13479:2009 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This International Standard specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes (ISO 13479:2009)
BS EN ISO 13479:2009 流体输送用聚烯烃管材.抗裂纹扩展的测定.切口管材慢速裂纹增长的试验方法(切口试验)
This International Standard specifies a test method for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms
Polyolefin pipes for the conveyance of fluids - Determination of resistance to crack propagation - Test method for slow crack growth on notched pipes
0 流体输送用聚烯烃管材 抗裂纹扩展的测定 切口管材慢速裂纹增长的试验方法(切口试验)
This International Standard specifies a method of test for determining the resistance to slow crack growth of polyolefin pipes, expressed in terms
EN ISO 13479:1997 输送流体用聚烯烃管材.耐裂纹扩展的测定.有凹口的管材上裂纹缓慢增长的试验方法(切口试验) ISO 13479-1997
Polyolefin Pipes for the Conveyance of Fluids - Determination of Resistance to Crack Propagation - Test Method for Slow Crack Growth on Notched Pipes (Notch Test) ISO 13479: 1997
GB/T 13527.1-1992 软聚氯乙烯管(流体输送用)
本标准规定了流体输送用软聚氯乙烯管（以下简称软管）的分类、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于以聚氯乙烯树脂为主要原料，经挤出成型的流体输送用塑料软管。该软管在常温下可用于输送某些适宜的流体
Plasticized polyvinyl chloride tubing for transport of fluids
ISO 13479:2022 流体输送用聚烯烃管.抗裂纹扩展性的测定.切口管上缓慢裂纹扩展的试验方法
Polyolefin pipes for the conveyance of fluids — Determination of resistance to crack propagation — Test method for slow crack growth on notched pipes
SY/T 7415-2018 油气集输管道内衬用聚烯烃管
ISO/TR 7474:1981 高密度聚乙烯管道和配件.输送流体的耐化学性
High density polyethylene pipes and fittings — Chemical resistance with respect to fluids to be conveyed
GB/T 14291-1993 矿用流体输送焊钢管
Welded steel pipe for mine liquid service
GB/T 8163-1999 输送流体用缝钢管
本标准规定了输送流体用缝钢管的尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于输送流体用的一般缝钢管
Seamless steel tubes for liquid service
GB/T 8163-2008 输送流体用缝钢管
本标准规定了输送流体用缝钢管的订货内容、尺寸、外形、重量、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于输送流体用一般缝钢管
Seamless steel tubes for liquid service
编辑：北检院编辑部
