给水用聚乙烯(PE)管道系统检测

GB/T 13663.3-2018 给水用聚乙烯（PE）管道系统 第3部分：管件

Polyethylene(PE)piping systems for water supply—Part 3: Fittings

GB/T 13663.2-2005 给水用聚乙烯(PE)管道系统 第2部分;管件

GB/T 13663的本部分规定了给水用聚乙烯（PE）管件（以下简称管件）的定义、材料、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于由PE63、PE80和PE100材料（见4.1）制造的管件以及本部分规定的聚乙烯给水系统中的机械连接管件

Polyethylene(PE)pipings systems for water supply.Part 2:Fittings

GB/T 13663.2-2018 给水用聚乙烯（PE）管道系统 第2部分：管材

Polyethylene(PE) piping systems for water supply—Part2: Pipes

GB/T 13663.1-2017 给水用聚乙烯(PE)管道系统 第1部分:总则

GB/T 13663的本部分规定了给水用聚乙烯(PE)管道系统的术语和定义、符号、缩略语、材料和卫生要求。 本部分与GB/T 13663的其他部分一起，适用于水温不大于40 ℃，最大工作压力(MOP)不大于2.0 MPa，一般用途的压力输水和饮用水输配的聚乙烯管道系统及其组件

Polyethylene(PE) piping systems for water supply.Part 1:General

GB/T 13663.5-2018 给水用聚乙烯（PE）管道系统 第5部分：系统适用性

Polyethylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the system

SH/T 1758-2007 给水管道系统用聚乙烯（PE）专用料

本标准规定了给水管道系统用聚乙烯（PE）专用料的命名、分类、要求、试验方法、检验规则、 标志及包装、运输和贮存。 本标准适用于具有特殊添加剂和着色剂（黑色或蓝色）的颗粒状聚乙烯材料。 该材料可用于制造给水管道系统用的聚乙烯管材和管件

Polyethylene (PE) materials for water supply piping systems

BS ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管

This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Pipes

BS ISO 4427-3:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管件

This part of ISO 4427 specifies the general aspects of fittings made from polyethylene (PE) for piping systems intended for the conveyance of water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Fittings

BS ISO 4427-1:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.总则

This part of ISO 4427 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - General

GB/T 13663-2000 给水用聚乙烯(PE)管材

本标准规定了用聚乙烯树脂为主要原料的材料，经挤出成型的给水用聚乙烯管材（以下简称“管材’)的产品规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。本标准还规定了原料的基本性能要求，包括分类体系。 本标准适用于用PE 63、PE 80和PE 100材料（见4.1）制造的给水

Polyethylene pipes for water supply

SANS 4427-2 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道

SANS 4427-2:2008 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道

Specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water prior to treatment

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes

ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管

This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes

BS EN 12201-2:2003 供水用塑料管道系统.聚乙烯(PE).管道

This Part of this European Standard specifies the characteristics of pipes made from polyethylene (PE) intended for the conveyance of water for human

Plastic piping systems for water supply - Polyethylene (PE) - Pipes

ISO 4427-3:2019 塑料管道系统——给水用聚乙烯（PE）管及管件第3部分:管件

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings

GB/T 13663.3-2018 给水用聚乙烯（PE）管道系统 第3部分：管件

Polyethylene(PE)piping systems for water supply—Part 3: Fittings

GB/T 13663.2-2005 给水用聚乙烯(PE)管道系统 第2部分;管件

GB/T 13663的本部分规定了给水用聚乙烯（PE）管件（以下简称管件）的定义、材料、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本部分适用于由PE63、PE80和PE100材料（见4.1）制造的管件以及本部分规定的聚乙烯给水系统中的机械连接管件

Polyethylene(PE)pipings systems for water supply.Part 2:Fittings

GB/T 13663.2-2018 给水用聚乙烯（PE）管道系统 第2部分：管材

Polyethylene(PE) piping systems for water supply—Part2: Pipes

GB/T 13663.1-2017 给水用聚乙烯(PE)管道系统 第1部分:总则

GB/T 13663的本部分规定了给水用聚乙烯(PE)管道系统的术语和定义、符号、缩略语、材料和卫生要求。 本部分与GB/T 13663的其他部分一起，适用于水温不大于40 ℃，最大工作压力(MOP)不大于2.0 MPa，一般用途的压力输水和饮用水输配的聚乙烯管道系统及其组件

Polyethylene(PE) piping systems for water supply.Part 1:General

GB/T 13663.5-2018 给水用聚乙烯（PE）管道系统 第5部分：系统适用性

Polyethylene (PE) piping systems for water supply—Part 5: Fitness for purpose of the system

SH/T 1758-2007 给水管道系统用聚乙烯（PE）专用料

本标准规定了给水管道系统用聚乙烯（PE）专用料的命名、分类、要求、试验方法、检验规则、 标志及包装、运输和贮存。 本标准适用于具有特殊添加剂和着色剂（黑色或蓝色）的颗粒状聚乙烯材料。 该材料可用于制造给水管道系统用的聚乙烯管材和管件

Polyethylene (PE) materials for water supply piping systems

BS ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管

This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Pipes

BS ISO 4427-3:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.管件

This part of ISO 4427 specifies the general aspects of fittings made from polyethylene (PE) for piping systems intended for the conveyance of water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Fittings

BS ISO 4427-1:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.总则

This part of ISO 4427 specifies the general aspects of polyethylene (PE) piping systems (mains and service pipes) intended for the conveyance of water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - General

GB/T 13663-2000 给水用聚乙烯(PE)管材

本标准规定了用聚乙烯树脂为主要原料的材料，经挤出成型的给水用聚乙烯管材（以下简称“管材’)的产品规格、技术要求、试验方法、检验规则、标志、包装、运输、贮存。本标准还规定了原料的基本性能要求，包括分类体系。 本标准适用于用PE 63、PE 80和PE 100材料（见4.1）制造的给水

Polyethylene pipes for water supply

SANS 4427-2 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道

SANS 4427-2:2008 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管道

Specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water prior to treatment

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes

ISO 4427-2:2007 塑料管道系统.给水用聚乙烯(PE)管和管件.第2部分:管

This part of ISO 4427 specifies the pipes made from polyethylene (PE) intended for the conveyance of water for human consumption, including raw water

Plastics piping systems - Polyethylene (PE) pipes and fittings for water supply - Part 2: Pipes

BS EN 12201-2:2003 供水用塑料管道系统.聚乙烯(PE).管道

This Part of this European Standard specifies the characteristics of pipes made from polyethylene (PE) intended for the conveyance of water for human

Plastic piping systems for water supply - Polyethylene (PE) - Pipes

ISO 4427-3:2019 塑料管道系统——给水用聚乙烯（PE）管及管件第3部分:管件

Plastics piping systems — Polyethylene (PE) pipes and fittings for water supply — Part 3: Fittings