冷轧电镀铬钢板及钢带检测

GB/T 24180-2009 冷轧电镀铬钢板及钢带

本标准规定了冷轧电镀铬钢板及钢带的分类和代号、尺寸、外形、重量及允许偏差、技术要求、检验和试验、包装、标志及质量证明书等。 本标准适用于公称厚度为O.15 mm~O.60 mm的一次冷轧电镀铬钢板及钢带以及公称厚度为0.12 mm~O.36 mm的二次冷轧电镀铬钢板及钢带(以下简称钢板及钢带

Cold-reduced electrolytic chromium/chromium oxide coated steel sheet and strip

GB/T 24180-2020 冷轧电镀铬钢板及钢带

Cold-reduced electrolytic chromium/chromium oxide coated steel sheet and strip

GB/T 2520-2008 冷轧电镀锡钢板及钢带

本标准规定了冷轧电镀锡钢板及钢带的分类和代号、尺寸、外形、重量、技术要求、检验和试验、包装、标志和质量证明书等。 本标准适用于公称厚度为0.15mm～0.60mm的一次冷轧电镀锡钢板及钢带以及公称厚度为0.12mm～0.36mm的二次冷轧电镀锡钢板及钢带（以下简称钢板及钢带

Cold-reduced electrolytic tinplate

GB/T 2520-2017 冷轧电镀锡钢板及钢带

Cold-reduced electrolytic tinplate

T/SSEA 0043-2019 冷轧镀锡板和冷轧镀铬板用热轧钢带

本标准规定了冷轧镀锡板和冷轧镀铬板用热轧钢带的牌号表示方法、 订货内容、尺寸、外形、重量 及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于冷轧镀锡板和冷轧镀铬板用公称厚度不大于 5mm 的热轧钢带（以下简称钢带

T/JSQA 044-2020 冷轧电镀锡钢板及钢带

本标准适用于公称厚度为0.17 mm～0.55 mm、公称宽度为700～1 250 mm的一次冷轧电镀锡钢板及钢带

Cold-reduced electrolytic tinplate

KS D 3528-2007 电镀锌冷轧钢板及钢带

이 규격은 전기 아연 도금 강판 및 강대(이하, 판 및 코일이라 한다.)에 대해서 규정한다

Electrolytic zinc-coated steel sheets and coils

GB/T 15675-1995 连续电镀锌冷轧钢板及钢带

本标准规定了连续电镀锌冷轧钢板和钢带的分类、尺寸、技术要求、试验方法和检验规则等。 本标准适用于汽车、电子、家电等行业用的连续电镀锌冷轧钢带及由此进行横切或纵切所得的钢板及纵切钢带。按本标准生产的产品除耐指纹处理外，若未经进一步进行表面涂层，则不宜于直接露天使用

Continuously electrolytic Zinc-coated cold-rolled steel sheets and strips

SANS 27:2008 冷轧镀锡产品.电解镀锡钢板及电解铬/氧化铬镀层钢板

Specifies requirements for tinmill products in the form of sheets or coils for subsequent cutting into sheets, consisting of single and double reduced

Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel

ISO 11950:1995 冷轧电镀铬/氧化铬涂层钢板

Specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils

Cold-reduced electrolytic chromium/chromium oxide-coated steel

EN 10202:1989 冷轧电解铬/氧化铬镀层钢板

Cold reduced electrolytic chromium/chromium oxide coated steel

SANS 27:1989 冷轧电解铬/氧化铬镀层钢板

This European Standard specifies requirements for single and double cold reduced electrolytic chromium/chromium oxide coated steel (ECCS) in the form

Cold reduced electrolytic chromium/chromium oxide coated steel

AS 2551-1982 钢板和钢带．冷轧电镀锌

Specifies three grades of cold-rolled unalloyed low carbon steel sheet produced on a continuous mill and zinc coated by an electrolytic process

Steel sheet and strip - Cold-rolled, electrolytic zinc-coated

JIS G7122-2000 冷轧电镀铬/氧化铬镀层钢

この規格は，シート状又は後でンートにカットするためのコイル状の，一回及びニ回冷間圧延電解クロムノクロム酸化物めっき鋼板(以下，ECCSという。)に対する要求事項について規定する

Cold-reduced electrolytic chromium/chromium oxide-coated steel

NBN-EN 10202-1992 冷轧电镀铬/氧化铬镀层钢

Cold reduced electrolytic chromium/chromium oxide coated steel

GB/T 24180-2009 冷轧电镀铬钢板及钢带

本标准规定了冷轧电镀铬钢板及钢带的分类和代号、尺寸、外形、重量及允许偏差、技术要求、检验和试验、包装、标志及质量证明书等。 本标准适用于公称厚度为O.15 mm~O.60 mm的一次冷轧电镀铬钢板及钢带以及公称厚度为0.12 mm~O.36 mm的二次冷轧电镀铬钢板及钢带(以下简称钢板及钢带

Cold-reduced electrolytic chromium/chromium oxide coated steel sheet and strip

GB/T 24180-2020 冷轧电镀铬钢板及钢带

Cold-reduced electrolytic chromium/chromium oxide coated steel sheet and strip

GB/T 2520-2008 冷轧电镀锡钢板及钢带

本标准规定了冷轧电镀锡钢板及钢带的分类和代号、尺寸、外形、重量、技术要求、检验和试验、包装、标志和质量证明书等。 本标准适用于公称厚度为0.15mm～0.60mm的一次冷轧电镀锡钢板及钢带以及公称厚度为0.12mm～0.36mm的二次冷轧电镀锡钢板及钢带（以下简称钢板及钢带

Cold-reduced electrolytic tinplate

GB/T 2520-2017 冷轧电镀锡钢板及钢带

Cold-reduced electrolytic tinplate

T/SSEA 0043-2019 冷轧镀锡板和冷轧镀铬板用热轧钢带

本标准规定了冷轧镀锡板和冷轧镀铬板用热轧钢带的牌号表示方法、 订货内容、尺寸、外形、重量 及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于冷轧镀锡板和冷轧镀铬板用公称厚度不大于 5mm 的热轧钢带（以下简称钢带

T/JSQA 044-2020 冷轧电镀锡钢板及钢带

本标准适用于公称厚度为0.17 mm～0.55 mm、公称宽度为700～1 250 mm的一次冷轧电镀锡钢板及钢带

Cold-reduced electrolytic tinplate

KS D 3528-2007 电镀锌冷轧钢板及钢带

이 규격은 전기 아연 도금 강판 및 강대(이하, 판 및 코일이라 한다.)에 대해서 규정한다

Electrolytic zinc-coated steel sheets and coils

GB/T 15675-1995 连续电镀锌冷轧钢板及钢带

本标准规定了连续电镀锌冷轧钢板和钢带的分类、尺寸、技术要求、试验方法和检验规则等。 本标准适用于汽车、电子、家电等行业用的连续电镀锌冷轧钢带及由此进行横切或纵切所得的钢板及纵切钢带。按本标准生产的产品除耐指纹处理外，若未经进一步进行表面涂层，则不宜于直接露天使用

Continuously electrolytic Zinc-coated cold-rolled steel sheets and strips

SANS 27:2008 冷轧镀锡产品.电解镀锡钢板及电解铬/氧化铬镀层钢板

Specifies requirements for tinmill products in the form of sheets or coils for subsequent cutting into sheets, consisting of single and double reduced

Cold reduced tinmill products - Electrolytic tinplate and electrolytic chromium/chromium oxide coated steel

ISO 11950:1995 冷轧电镀铬/氧化铬涂层钢板

Specifies requirements for single and double cold-reduced electrolytic chromium/chromium oxide-coated steel (ECCS) in the form of sheets or coils

Cold-reduced electrolytic chromium/chromium oxide-coated steel

EN 10202:1989 冷轧电解铬/氧化铬镀层钢板

Cold reduced electrolytic chromium/chromium oxide coated steel

SANS 27:1989 冷轧电解铬/氧化铬镀层钢板

This European Standard specifies requirements for single and double cold reduced electrolytic chromium/chromium oxide coated steel (ECCS) in the form

Cold reduced electrolytic chromium/chromium oxide coated steel

AS 2551-1982 钢板和钢带．冷轧电镀锌

Specifies three grades of cold-rolled unalloyed low carbon steel sheet produced on a continuous mill and zinc coated by an electrolytic process

Steel sheet and strip - Cold-rolled, electrolytic zinc-coated

JIS G7122-2000 冷轧电镀铬/氧化铬镀层钢

この規格は，シート状又は後でンートにカットするためのコイル状の，一回及びニ回冷間圧延電解クロムノクロム酸化物めっき鋼板(以下，ECCSという。)に対する要求事項について規定する

Cold-reduced electrolytic chromium/chromium oxide-coated steel

NBN-EN 10202-1992 冷轧电镀铬/氧化铬镀层钢

Cold reduced electrolytic chromium/chromium oxide coated steel