低压开关和控制器检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

SANS 60947-2:2007 低压开关和控制器.第2部分:断路器

This standard applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does

Low-voltage switchgear and controlgear Part 2: Circuit-breakers

SANS 60947-1:2005 低压开关和控制器.第1部份:一般规则

This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as "equipment

Low-voltage switchgear and controlgear Part 1: General rules

SANS 60947-6-1:2006 低压开关和控制器.第6.1节:多功能电器.自动转换开关电器

Applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated

Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment

SANS 60947-7-1:2003 低压开关和控制器.第7.1部分:辅助设备.铜导体接线盒

This part of IEC 60947 specifies requirements for terminal blocks with screw-type or screw-less-type clamping units primarily intended for industrial

Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

SANS 60947-5-2:2005 低压开关和控制器.第5.2节:控制电路设备和开关元件.接近开关

This part of IEC 60947 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects

Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements - Proximity switches

SANS 60947-5-9:2007 低压开关和控制器.第5.9节:控制电路设备和开关元件.流量率开关

Applies to flow rate switches that sense the rate of flow of a gas, a liquid or a granular solid. These switches change their output state

Low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements - Flow rate switches

SANS 60947-6-2:2007 低压开关和控制器.第6.2节:多功能电器.控制与保护开关电器(设备)

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated

Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

SANS 60947-5-8:2007 低压开关和控制器.第5.8节:控制电路器件和切换元件.三位启动开关

Specifies requirements for three position enabling switches. These switches are used as components of enabling devices to provide signals

Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

SANS 60947-3:2006 低压开关和控制器.第3部分:开关,断路器,隔离器及熔断器组合电器

This standard applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor

Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

SANS 60947-7-3:2003 低压开关和控制器.第7.3部分:辅助设备.保险丝接线盒的安全要求

This part of IEC 60947 applies to fuse terminal blocks with screw-type or screwless-type clamping units for the connection of rigid (solid or stranded

Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks

SANS 60947-5-1:2005 低压开关和控制器.第5.1部分:辅助设备.控制电路器件和开关.机电控制电路器件

This part of IEC 60947 applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc

Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

SANS 60947-7-2:2003 低压开关和控制器.第7.2部分:辅助设备.铜导体的防护性导体接线盒

This part of IEC 60947 specifies requirements for protective conductor terminal blocks with PE function up to 120 mm2 (250 kcmil) and for protective

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

SANS 60947-5-7:2003 低压开关和控制器.第5.7节:控制电路器件和切换元件.带模拟输出功能的接近开关

States the requirements for proximity devices with analogue output

Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output

NF C63-422:1993 低压开关和控制器组件.第2部分:母线中继系统的特殊要求(汇流条通道)

LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 2 : PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS). (EUROPEAN STANDARD EN 60 439-2).

SANS 60947-5-6:1999 低压开关和控制器.第5.6节:控制电路电器和开关元件.接近传感器和开关放大器的DC接口

Applies to proximity sensors connected for operation by a two-wire connecting cable to the control input of a switching amplifier. The switching

Low-voltage switchgear and controlgear Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

SANS 60947-2:2007 低压开关和控制器.第2部分:断路器

This standard applies to circuit-breakers, the main contacts of which are intended to be connected to circuits, the rated voltage of which does

Low-voltage switchgear and controlgear Part 2: Circuit-breakers

SANS 60947-1:2005 低压开关和控制器.第1部份:一般规则

This standard applies, when required by the relevant product standard, to switchgear and controlgear hereinafter referred to as "equipment

Low-voltage switchgear and controlgear Part 1: General rules

SANS 60947-6-1:2006 低压开关和控制器.第6.1节:多功能电器.自动转换开关电器

Applies to transfer switching equipment (TSE) to be used in power systems with interruption of the supply to the load during transfer, the rated

Low-voltage switchgear and controlgear Part 6-1: Multiple function equipment - Transfer switching equipment

SANS 60947-7-1:2003 低压开关和控制器.第7.1部分:辅助设备.铜导体接线盒

This part of IEC 60947 specifies requirements for terminal blocks with screw-type or screw-less-type clamping units primarily intended for industrial

Low-voltage switchgear and controlgear Part 7-1: Ancillary equipment - Terminal blocks for copper conductors

SANS 60947-5-2:2005 低压开关和控制器.第5.2节:控制电路设备和开关元件.接近开关

This part of IEC 60947 applies to inductive and capacitive proximity switches that sense the presence of metallic and/or non-metallic objects

Low-voltage switchgear and controlgear Part 5-2: Control circuit devices and switching elements - Proximity switches

SANS 60947-5-9:2007 低压开关和控制器.第5.9节:控制电路设备和开关元件.流量率开关

Applies to flow rate switches that sense the rate of flow of a gas, a liquid or a granular solid. These switches change their output state

Low-voltage switchgear and controlgear Part 5-9: Control circuit devices and switching elements - Flow rate switches

SANS 60947-6-2:2007 低压开关和控制器.第6.2节:多功能电器.控制与保护开关电器(设备)

Applies to control and protective switching devices (or equipment) (CPS), the main contacts of which are intended to be connected to circuits of rated

Low-voltage switchgear and controlgear Part 6-2: Multiple function equipment - Control and protective switching devices (or equipment) (CPS)

SANS 60947-5-8:2007 低压开关和控制器.第5.8节:控制电路器件和切换元件.三位启动开关

Specifies requirements for three position enabling switches. These switches are used as components of enabling devices to provide signals

Low-voltage switchgear and controlgear Part 5-8: Control circuit devices and switching elements - Three-position enabling switches

SANS 60947-3:2006 低压开关和控制器.第3部分:开关,断路器,隔离器及熔断器组合电器

This standard applies to switches, disconnectors, switch-disconnectors and fuse-combination units to be used in distribution circuits and motor

Low-voltage switchgear and controlgear Part 3: Switches, disconnectors, switch-disconnectors and fuse-combination units

SANS 60947-7-3:2003 低压开关和控制器.第7.3部分:辅助设备.保险丝接线盒的安全要求

This part of IEC 60947 applies to fuse terminal blocks with screw-type or screwless-type clamping units for the connection of rigid (solid or stranded

Low-voltage switchgear and controlgear Part 7-3: Ancillary equipment - Safety requirements for fuse terminal blocks

SANS 60947-5-1:2005 低压开关和控制器.第5.1部分:辅助设备.控制电路器件和开关.机电控制电路器件

This part of IEC 60947 applies to control circuit devices and switching elements intended for controlling, signalling, interlocking, etc

Low-voltage switchgear and controlgear Part 5-1: Control circuit devices and switching elements - Electromechanical control circuit devices

SANS 60947-7-2:2003 低压开关和控制器.第7.2部分:辅助设备.铜导体的防护性导体接线盒

This part of IEC 60947 specifies requirements for protective conductor terminal blocks with PE function up to 120 mm2 (250 kcmil) and for protective

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

SANS 60947-5-7:2003 低压开关和控制器.第5.7节:控制电路器件和切换元件.带模拟输出功能的接近开关

States the requirements for proximity devices with analogue output

Low-voltage switchgear and controlgear Part 5-7: Control circuit devices and switching elements - Requirements for proximity devices with analogue output

NF C63-422:1993 低压开关和控制器组件.第2部分:母线中继系统的特殊要求(汇流条通道)

LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES. PART 2 : PARTICULAR REQUIREMENTS FOR BUSBAR TRUNKING SYSTEMS (BUSWAYS). (EUROPEAN STANDARD EN 60 439-2).

SANS 60947-5-6:1999 低压开关和控制器.第5.6节:控制电路电器和开关元件.接近传感器和开关放大器的DC接口

Applies to proximity sensors connected for operation by a two-wire connecting cable to the control input of a switching amplifier. The switching

Low-voltage switchgear and controlgear Part 5-6: Control circuit devices and switching elements - DC interface for proximity sensors and switching amplifiers (NAMUR)

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通