YY 1122-2005 咬骨钳（剪)通用技术条件
本标准规定了咬骨钳（剪)的型式和基本尺寸、材料、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于单关节或双关节咬骨钳（剪)，以下简称骨钳（剪
General technique requirements for orthopaedics clamp(scissor)
YY/T 1122-2017 咬骨钳(剪)通用技术条件
YY/T 1122-2005 咬骨钳（剪）通用技术条件
YY/T 1127-2006 咬骨钳
本标准规定了咬骨钳的型式和基本尺寸、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于咬切或修正骨骼用的咬骨钳
Rongeur
DOD A-A-54442-1991 咬骨钳
This commercial item description covers a nipper-rongeur suitable for the removal of soft tissue and bone
NIPPER-RONGEUR, SUGARMAN
DOD A-A-54835-1993 咬骨钳
This Comerical Item Description covers straight upbitting Kerrison rongeurs suitable for bone removal during surgical procedures
RONGEUR, KERRISON
DOD A-A-53352-1988 直咬骨钳
The General Services Administration has authorized the use of this commercial item description
RONGEUR, STRAIGHT (CITELLI)
DOD A-A-53394-1988 直的咬骨钳
The rongeur shall be a rongeur of the Love- Kerrison design with an 8 inch nominai shaft length. The cutting mechanism chai1 be straight, angled down
RONGEUR, STRAIGHT (LOVE-KERRISON)
DOD A-A-53628-1988 直的咬骨钳
The rongeur shall have an overall length of 8 inches,The rongeur shall have a straight shaft and jaws.The jaw faces shall be oval and smooth
RONGEUR, STRAIGHT (ADSON)
DOD A-A-53502-1988 直的咬骨钳
The rongeur shall be a Sauerbruch style, straighton, double action, bone rongeur with 17 mm jaws and an,overall length of 30.5 cm and a handle
RONGEUR, STRAIGHT, SQUARE BITE (SAUERBRUCH)
DOD A-A-54464-1991 牙齿咬骨钳
This commercial item description covers rongeurs suitable for use in surgical procedures
RONGEUR, DENTAL
YY 91130-1999 椎板咬骨钳
DOD A-A-54261 A-1991 有角的咬骨钳
Ronguers shall be of the Love-Gruenwald design having cup shaped jaws at the working end.type I, angled up, or type II, angled-down, as shown on DPSC
RONGUER, ANGLED, LOVE-GRUENWALD
DOD A-A-53675-1988 直的咬骨钳(6英尺)
shaped oval jaws and used primarily for cutting cartilage during microsurgical procedures
RONGEUR, STRAIGHT (DECKER, 6 INCHES)
DOD A-A-54158-1990 7英尺弯曲咬骨钳
The rongeur shall be a Beyer design rongeur with a double-action mechanism and an overall length of 7 inches.The jaws shall be cupped and have a 11/16
RONGEUR, CURVED, 7 INCH (BEYER)
YY 1122-2005 咬骨钳（剪)通用技术条件
本标准规定了咬骨钳（剪)的型式和基本尺寸、材料、要求、试验方法、检验规则、标志、使用说明书、包装、运输和贮存。 本标准适用于单关节或双关节咬骨钳（剪)，以下简称骨钳（剪
General technique requirements for orthopaedics clamp(scissor)
YY/T 1122-2017 咬骨钳(剪)通用技术条件
YY/T 1122-2005 咬骨钳（剪）通用技术条件
YY/T 1127-2006 咬骨钳
本标准规定了咬骨钳的型式和基本尺寸、材料、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于咬切或修正骨骼用的咬骨钳
Rongeur
DOD A-A-54442-1991 咬骨钳
This commercial item description covers a nipper-rongeur suitable for the removal of soft tissue and bone
NIPPER-RONGEUR, SUGARMAN
DOD A-A-54835-1993 咬骨钳
This Comerical Item Description covers straight upbitting Kerrison rongeurs suitable for bone removal during surgical procedures
RONGEUR, KERRISON
DOD A-A-53352-1988 直咬骨钳
The General Services Administration has authorized the use of this commercial item description
RONGEUR, STRAIGHT (CITELLI)
DOD A-A-53394-1988 直的咬骨钳
The rongeur shall be a rongeur of the Love- Kerrison design with an 8 inch nominai shaft length. The cutting mechanism chai1 be straight, angled down
RONGEUR, STRAIGHT (LOVE-KERRISON)
DOD A-A-53628-1988 直的咬骨钳
The rongeur shall have an overall length of 8 inches,The rongeur shall have a straight shaft and jaws.The jaw faces shall be oval and smooth
RONGEUR, STRAIGHT (ADSON)
DOD A-A-53502-1988 直的咬骨钳
The rongeur shall be a Sauerbruch style, straighton, double action, bone rongeur with 17 mm jaws and an,overall length of 30.5 cm and a handle
RONGEUR, STRAIGHT, SQUARE BITE (SAUERBRUCH)
DOD A-A-54464-1991 牙齿咬骨钳
This commercial item description covers rongeurs suitable for use in surgical procedures
RONGEUR, DENTAL
YY 91130-1999 椎板咬骨钳
DOD A-A-54261 A-1991 有角的咬骨钳
Ronguers shall be of the Love-Gruenwald design having cup shaped jaws at the working end.type I, angled up, or type II, angled-down, as shown on DPSC
RONGUER, ANGLED, LOVE-GRUENWALD
DOD A-A-53675-1988 直的咬骨钳(6英尺)
shaped oval jaws and used primarily for cutting cartilage during microsurgical procedures
RONGEUR, STRAIGHT (DECKER, 6 INCHES)
DOD A-A-54158-1990 7英尺弯曲咬骨钳
The rongeur shall be a Beyer design rongeur with a double-action mechanism and an overall length of 7 inches.The jaws shall be cupped and have a 11/16
RONGEUR, CURVED, 7 INCH (BEYER)
编辑：北检院编辑部
