多功能钢铁表面处理液检测

检测概述

2023-05-24 17:45:33     TAG:

检测项目报价?  解决方案?  检测周期?  样品要求?(不接受个人委托)

点 击 解 答  

GB/T 12612-2005 通用技术条件

本标准规定了以磷酸和磷酸盐为主要成分添加其他助剂组成的多功能钢铁表面处理液(以下简称处理液)的分类、技术要求、检验方法及检验规则。 本标准适用于钢铁工作一般涂装前表面综合处理的处理液产品,包括浓缩液和工作液

General specification for multifunctional solution of iron and steel surface treatment

GB/T 12612-1990 通用技术条件

本标准规定了以磷酸和磷酸盐为主要成分添加其他助剂组成的多功能钢铁表面处理液(以下简称处理液)的分类、技术要求、检验方法及检验规则。 本标准适用于钢铁工件一般涂装前表面综合处理以工作液出厂的产品;也适用于特性相同、出厂时固液组分分别包装或浓缩状态,在应用时再配制成工作液的产品

General specification for multifunctional solution of steel and iron surface treatment

NF A35-563:1983 .后淬火用热的特殊.类型

Iron and steel. Heat treated special steels for quenching after surface treating. Types.

NF A91-460:1977 .上的释锌层.(粉未镀锌)

SURFACE TREATMENTS. SHERARDIZED COATINGS ON IRON AND STEEL (SHERARDIZATION).

DIN 17022-3:1989 材料热.热方法.第3部分:硬化

This standard describes the procedures of heat treatment and gives advances for the heat treatment of work peaces and tools made of steel

Heat treatment of ferrous materials; heat treatment methods; case hardening

DIN 17022-5:2000 材料热.热方法.第5部分:淬火

The document describes methods of heat treatment and gives notices for surface hardening treatment

Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening

GB/T 18839.1-2002 涂覆涂料前 方法 总则

本标准规定了涂覆涂料前钢材表面处理方法选择的总原则,同时规定了在选择和确定表面处理方法和处理等级前应考虑的相关要素。 本标准适用于涂覆涂料前钢材表面处理方法的选择和确定

Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles

DL/T 614-1997

Multifunction watthour meter

DL/T 614-2007

本标准规定了电力行业在订货、验收、使用多功能电能表时的技术要素,同时规范功能设置。 本标准适用于测量参比频率为50Hz(或60Hz)的单、三相交流电能的安装式多功能电能表(简称电能表)。 本标准仅规定了多功能电能表需具备的功能和必须达到的技术性能,多费率电能表的技术要求可参照本标准相关内容

Multifunction electricity meterring equipment(A.C.)

PN H97052-1970 防腐蚀,喷漆的质量的评估

Przedmiotem normy jest ocena przygotowania powierzchni stali, staliwa i ?eliwa po mechanicznym usuni?ciu nierówno?ci oraz po oczyszczeniu lub

Corrosion protection Evaluation of surface preparation ?uality for painting iron and steel

AS 1627.9-2002 金属加工.制备和预.涂漆用图示标准

Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces

GB/T 18839.2-2002 涂覆涂料前 方法 磨料喷射清

本标准规定了涂覆涂料前钢材表面处理方法磨料喷射清理的定义及其方法、所用磨料和工艺程序等。 本标准适用于未涂过涂料或已涂有涂料的新的和已腐蚀的钢材表面的清理

Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning

JB/T 7656-1995 电度

JB/T 11805-2014 非调质

本标准规定了非调质钢件表面热处理质量控制、安全卫生的基本要求。本标准适用于非调质钢件的表面感应淬火、气体渗氮、气体氮碳共渗及离子渗氮工艺

Surface heat treatment of microalloyed medium carbon steel

ASTM D2200-95(2001)e2 涂漆用绘图标准

1.1 The visual surface preparation standards consist of a series of color prints available as separate publications. Three different sets

Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces

GB/T 12612-2005 通用技术条件

本标准规定了以磷酸和磷酸盐为主要成分添加其他助剂组成的多功能钢铁表面处理液(以下简称处理液)的分类、技术要求、检验方法及检验规则。 本标准适用于钢铁工作一般涂装前表面综合处理的处理液产品,包括浓缩液和工作液

General specification for multifunctional solution of iron and steel surface treatment

GB/T 12612-1990 通用技术条件

本标准规定了以磷酸和磷酸盐为主要成分添加其他助剂组成的多功能钢铁表面处理液(以下简称处理液)的分类、技术要求、检验方法及检验规则。 本标准适用于钢铁工件一般涂装前表面综合处理以工作液出厂的产品;也适用于特性相同、出厂时固液组分分别包装或浓缩状态,在应用时再配制成工作液的产品

General specification for multifunctional solution of steel and iron surface treatment

NF A35-563:1983 .后淬火用热的特殊.类型

Iron and steel. Heat treated special steels for quenching after surface treating. Types.

NF A91-460:1977 .上的释锌层.(粉未镀锌)

SURFACE TREATMENTS. SHERARDIZED COATINGS ON IRON AND STEEL (SHERARDIZATION).

DIN 17022-3:1989 材料热.热方法.第3部分:硬化

This standard describes the procedures of heat treatment and gives advances for the heat treatment of work peaces and tools made of steel

Heat treatment of ferrous materials; heat treatment methods; case hardening

DIN 17022-5:2000 材料热.热方法.第5部分:淬火

The document describes methods of heat treatment and gives notices for surface hardening treatment

Heat treatment of ferrous materials - Methods of heat treatment - Part 5: Surface hardening

GB/T 18839.1-2002 涂覆涂料前 方法 总则

本标准规定了涂覆涂料前钢材表面处理方法选择的总原则,同时规定了在选择和确定表面处理方法和处理等级前应考虑的相关要素。 本标准适用于涂覆涂料前钢材表面处理方法的选择和确定

Preparation of steel substrates before application of paints and related products--Surface preparation methods--General principles

DL/T 614-1997

Multifunction watthour meter

DL/T 614-2007

本标准规定了电力行业在订货、验收、使用多功能电能表时的技术要素,同时规范功能设置。 本标准适用于测量参比频率为50Hz(或60Hz)的单、三相交流电能的安装式多功能电能表(简称电能表)。 本标准仅规定了多功能电能表需具备的功能和必须达到的技术性能,多费率电能表的技术要求可参照本标准相关内容

Multifunction electricity meterring equipment(A.C.)

AS 1627.9-2002 金属加工.制备和预.涂漆用图示标准

Metal finishing - Preparation and pretreatment of surfaces - Pictorial surface preparation standards for painting steel surfaces

PN H97052-1970 防腐蚀,喷漆的质量的评估

Przedmiotem normy jest ocena przygotowania powierzchni stali, staliwa i ?eliwa po mechanicznym usuni?ciu nierówno?ci oraz po oczyszczeniu lub

Corrosion protection Evaluation of surface preparation ?uality for painting iron and steel

GB/T 18839.2-2002 涂覆涂料前 方法 磨料喷射清

本标准规定了涂覆涂料前钢材表面处理方法磨料喷射清理的定义及其方法、所用磨料和工艺程序等。 本标准适用于未涂过涂料或已涂有涂料的新的和已腐蚀的钢材表面的清理

Preparation of steel substrates before application of paints and related products--Surface preparation methods--Abrasive blast-cleaning

JB/T 7656-1995 电度

JB/T 11805-2014 非调质

本标准规定了非调质钢件表面热处理质量控制、安全卫生的基本要求。本标准适用于非调质钢件的表面感应淬火、气体渗氮、气体氮碳共渗及离子渗氮工艺

Surface heat treatment of microalloyed medium carbon steel

ASTM D2200-95(2001)e2 涂漆用绘图标准

1.1 The visual surface preparation standards consist of a series of color prints available as separate publications. Three different sets

Standard Pictorial Surface Preparation Standards for Painting Steel Surfaces

本文网址:https://www.bjjcyjy.com/yw/qt/qtt/21715.html
京ICP备2022008454号-4
在线咨询
在线咨询