服务热线:400-635-0567

非合金钢及细晶粒钢焊条检测

发布时间:2023-05-25 09:38:45

点击量:0

军工检测 其他检测

GB/T 5117-2012

本标准规定了非合金钢及细晶粒钢焊条的型号、技术要求、试验方法、检验规则、包装、标志和质量证明。 本标准适用于抗拉强度低于570MPa的非合金钢及细晶粒钢焊条

Covered electrodes for manual metal arc welding of non-alloy and fine grain steels

GB/T 10045-2018 药芯

Tubular cored electrodes for non-alloy and fine grain steels

GB/T 8110-2020 熔化极气体保护电弧实心

Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels

PNS ISO 2560:2021 接耗材.手工属电弧用包覆.分类

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification

GB/T 39280-2020 钨极惰性气体保护电弧实心

Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels

ISO 2560:2009 接材料.的手工属电弧用涂敷.分类

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification

NF A81-309:1995 接消耗材料.的手工属弧接用药皮

Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification.

NF A81-309:2009 料.手工属电弧接的.分类

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification.

PNS ISO 14171:2021 接耗材.埋弧用实心丝、管状药芯/剂组.分类

Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification

GB/T 5293-2018 埋弧实心丝、药芯丝和丝-剂组分类要求

本标准规定了埋弧焊用非合金钢及细晶粒钢实心焊丝、药芯焊丝和焊丝-焊剂组合的分类、技术要求、试验方法、复验和供货技术条件等内容。 本标准适用于埋弧焊用非合金钢及细晶粒钢实心焊丝分类,以及最小抗拉强度要求值不大于570 MPa的焊丝-焊剂组合的分类要求

Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels

NF A81-325:1997 .制惰性气体保护钨接用棒材、线材和镀层

Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine grain steels. Classification.

PNS ISO 636:2021 接耗材.的钨惰性气体接用丝和沉积物.分类

This Standard specifies requirements for classification of rods and wires in the as-welded condition and in the post-weld heat-treated condition

Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification

NF A81-316:1995 接消耗材料.埋弧丝和剂.分类

Welding consumables. Wire electrodes and wire-flux combination for submerged arc welding of non alloy and fine grain steels. Classification.

KS D ISO 10799:2005 结构的冷成型接结构空心型材.技术交货

이 규격은 원형, 사각형, 및 직사각형 구조용 중공 절단면을 갖는 냉간 성형, 접합한 강의

Structural steels-Cold-formed, welded, structural hollow sections-Technical delivery requirements

KS D ISO 10799:2013 结构的冷成型接结构空心型材 技术交货

Structural steels-Cold-formed, welded, structural hollow sections-Technical delivery requirements

GB/T 5117-2012

本标准规定了非合金钢及细晶粒钢焊条的型号、技术要求、试验方法、检验规则、包装、标志和质量证明。 本标准适用于抗拉强度低于570MPa的非合金钢及细晶粒钢焊条

Covered electrodes for manual metal arc welding of non-alloy and fine grain steels

GB/T 10045-2018 药芯

Tubular cored electrodes for non-alloy and fine grain steels

GB/T 8110-2020 熔化极气体保护电弧实心

Wire electrodes and weld deposits for gas shielded metal arc welding of non alloy and fine grain steels

PNS ISO 2560:2021 接耗材.手工属电弧用包覆.分类

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification

GB/T 39280-2020 钨极惰性气体保护电弧实心

Rods, wires and deposits for tungsten inert gas welding of non alloy and fine grain steels

ISO 2560:2009 接材料.的手工属电弧用涂敷.分类

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification

NF A81-309:1995 接消耗材料.的手工属弧接用药皮

Welding consumables. Covered electrodes for manual metal arc welding of non alloy and fine grain steels. Classification.

NF A81-309:2009 料.手工属电弧接的.分类

Welding consumables - Covered electrodes for manual metal arc welding of non-alloy and fine grain steels - Classification.

PNS ISO 14171:2021 接耗材.埋弧用实心丝、管状药芯/剂组.分类

Welding consumables - Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels - Classification

GB/T 5293-2018 埋弧实心丝、药芯丝和丝-剂组分类要求

本标准规定了埋弧焊用非合金钢及细晶粒钢实心焊丝、药芯焊丝和焊丝-焊剂组合的分类、技术要求、试验方法、复验和供货技术条件等内容。 本标准适用于埋弧焊用非合金钢及细晶粒钢实心焊丝分类,以及最小抗拉强度要求值不大于570 MPa的焊丝-焊剂组合的分类要求

Solid wire electrodes, tubular cored electrodes and electrode/flux combinations for submerged arc welding of non alloy and fine grain steels

NF A81-325:1997 .制惰性气体保护钨接用棒材、线材和镀层

Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine grain steels. Classification.

PNS ISO 636:2021 接耗材.的钨惰性气体接用丝和沉积物.分类

This Standard specifies requirements for classification of rods and wires in the as-welded condition and in the post-weld heat-treated condition

Welding consumables - Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels - Classification

NF A81-316:1995 接消耗材料.埋弧丝和剂.分类

Welding consumables. Wire electrodes and wire-flux combination for submerged arc welding of non alloy and fine grain steels. Classification.

KS D ISO 10799:2005 结构的冷成型接结构空心型材.技术交货

이 규격은 원형, 사각형, 및 직사각형 구조용 중공 절단면을 갖는 냉간 성형, 접합한 강의

Structural steels-Cold-formed, welded, structural hollow sections-Technical delivery requirements

KS D ISO 10799:2013 结构的冷成型接结构空心型材 技术交货

Structural steels-Cold-formed, welded, structural hollow sections-Technical delivery requirements

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区南三环西路16号2号楼27层
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询