汽蚀余量检测

GB/T 13006-2013 离心泵、混流泵和轴流泵 汽蚀余量

本标准规定了离心泵、混流泵和轴流泵(以下简称泵)的汽蚀余量NPSH3指标。本标准适用于输送单相液体的泵

NPSH for centrifugal, mixed flow and axial flow pumps

JB 3562-1984 离心泵 混流泵和轴流泵 汽蚀余量

GB/T 13006-1991 离心泵、混流泵和轴流泵 汽蚀余量

本标准规定了离心泵、混流泵和轴流泵的临界汽蚀余量指标。 本标准适用于各种输送单相液体的离心泵、混流泵和轴流泵，应用范围：一般离心泵比转速n_s =50～300（或型式数K＝0.26～1.55），单级扬程H＝6～180m； 冷凝泵 吸流量Q＝20～1800m³/h（或

NPSH for centrifugal,mixed flow and axial pumps

ASME SEC VIII D1 NMA APP E-2001 附录E.关于腐蚀余量的良好建议规范

Boiler and Pressure Vessels.Appendix E Suggested Good Practice Regarding Corrosion Allowance

Appendix E Suggested Good Practice Regarding Corrosion Allowance

DL/T 1924-2018 燃气—蒸汽联合循环机组余热锅炉水汽质量控制标准

ASME B31G-2012 腐蚀管道剩余强度测定手册

Manual for Determining the Remaining Strength of Corroded Pipelines

ASME B31.G-2012 腐蚀管道剩余强度测定手册

This document is intended solely for the purpose of providing guidance in the evaluation of metal loss in pressurized pipelines and piping systems

Manual for Determining the Remaining Strength of Corroded Pipelines (B31G - 2012)

JB/T 8888-1999 环芯法测量汽轮机、汽轮发电机转子锻件 残余应力的试验方法

本标准规定了用环芯法测量汽轮机、汽轮发电机转子锻件残余应力的测量方法、试验器材和测量步骤。 本标准适用于JB/T 7025、JB/T 1265、JB/T 7027、JB/T 7026、JB/T 1267、JB/T 7178中各类转子锻件的残余应力测定，也适用于其他轴类锻件的残余应力

Test method of determining residual stress of rotor forgings of steam turbines and steam turbo-generators

JB/T 8888-2018 环芯法测量汽轮机、汽轮发电机转子锻件残余应力的试验方法

NAVY A-A-59441-2004 蒸汽腐蚀抑制剂

This commercial item description covers the requirements for vapor corrosion inhibitors (VCIs) to provide corrosion protection for metal components

VAPOR CORROSION INHIBITORS

DB13/T 1287-2010 汽轮机循环水余热供热技术规程

本标准规定了循环水供热原理和注意事项、热电厂循环水供热机组的运行技术参数及配备设备性能参数、循环水供热投入步骤、循环水供热解列步骤、循环水供热机组事故处理、调峰站设备的操作步骤。本标准适用于地方小型热电厂循环水供热机组（型号为C12-50/10的抽凝式机组

AA T17 铝:耐腐蚀汽车材料

Aluminum: The Corrosion Resistant Automotive Material

ASME B31.G_ES-2012 腐蚀管道剩余强度测定手册(西班牙语)

Esta Norma tiene como objetivo único brindar orientación en la evaluación de la pérdida de metal en ductos y sistemas de tuberías a presión. Es

Manual para la determinación de la Resistencia remanente de tuberías corroídas (Spanish) (B31G_ES - 2012)

ARMY A-A-52433 VALID NOTICE 1-2004 公制余量装配

A-A-52433, dated 26 February 1993, has been reviewed and determined to be valid for use in acquisition

CUSHION ASSEMBLIES (METRIC)

ARMY A-A-52433-1993 公制余量装配

The GeneraThe General Services Administration has authorized the use of this commercial item description(CID) as a replacement for MIL-C-62499

CUSHION ASSEMBLIES (METRIC)

GB/T 13006-2013 离心泵、混流泵和轴流泵 汽蚀余量

本标准规定了离心泵、混流泵和轴流泵(以下简称泵)的汽蚀余量NPSH3指标。本标准适用于输送单相液体的泵

NPSH for centrifugal, mixed flow and axial flow pumps

JB 3562-1984 离心泵 混流泵和轴流泵 汽蚀余量

GB/T 13006-1991 离心泵、混流泵和轴流泵 汽蚀余量

本标准规定了离心泵、混流泵和轴流泵的临界汽蚀余量指标。 本标准适用于各种输送单相液体的离心泵、混流泵和轴流泵，应用范围：一般离心泵比转速n_s =50～300（或型式数K＝0.26～1.55），单级扬程H＝6～180m； 冷凝泵 吸流量Q＝20～1800m³/h（或

NPSH for centrifugal,mixed flow and axial pumps

ASME SEC VIII D1 NMA APP E-2001 附录E.关于腐蚀余量的良好建议规范

Boiler and Pressure Vessels.Appendix E Suggested Good Practice Regarding Corrosion Allowance

Appendix E Suggested Good Practice Regarding Corrosion Allowance

DL/T 1924-2018 燃气—蒸汽联合循环机组余热锅炉水汽质量控制标准

ASME B31G-2012 腐蚀管道剩余强度测定手册

Manual for Determining the Remaining Strength of Corroded Pipelines

ASME B31.G-2012 腐蚀管道剩余强度测定手册

This document is intended solely for the purpose of providing guidance in the evaluation of metal loss in pressurized pipelines and piping systems

Manual for Determining the Remaining Strength of Corroded Pipelines (B31G - 2012)

JB/T 8888-1999 环芯法测量汽轮机、汽轮发电机转子锻件 残余应力的试验方法

本标准规定了用环芯法测量汽轮机、汽轮发电机转子锻件残余应力的测量方法、试验器材和测量步骤。 本标准适用于JB/T 7025、JB/T 1265、JB/T 7027、JB/T 7026、JB/T 1267、JB/T 7178中各类转子锻件的残余应力测定，也适用于其他轴类锻件的残余应力

Test method of determining residual stress of rotor forgings of steam turbines and steam turbo-generators

JB/T 8888-2018 环芯法测量汽轮机、汽轮发电机转子锻件残余应力的试验方法

NAVY A-A-59441-2004 蒸汽腐蚀抑制剂

This commercial item description covers the requirements for vapor corrosion inhibitors (VCIs) to provide corrosion protection for metal components

VAPOR CORROSION INHIBITORS

DB13/T 1287-2010 汽轮机循环水余热供热技术规程

本标准规定了循环水供热原理和注意事项、热电厂循环水供热机组的运行技术参数及配备设备性能参数、循环水供热投入步骤、循环水供热解列步骤、循环水供热机组事故处理、调峰站设备的操作步骤。本标准适用于地方小型热电厂循环水供热机组（型号为C12-50/10的抽凝式机组

AA T17 铝:耐腐蚀汽车材料

Aluminum: The Corrosion Resistant Automotive Material

ASME B31.G_ES-2012 腐蚀管道剩余强度测定手册(西班牙语)

Esta Norma tiene como objetivo único brindar orientación en la evaluación de la pérdida de metal en ductos y sistemas de tuberías a presión. Es

Manual para la determinación de la Resistencia remanente de tuberías corroídas (Spanish) (B31G_ES - 2012)

ARMY A-A-52433 VALID NOTICE 1-2004 公制余量装配

A-A-52433, dated 26 February 1993, has been reviewed and determined to be valid for use in acquisition

CUSHION ASSEMBLIES (METRIC)

ARMY A-A-52433-1993 公制余量装配

The GeneraThe General Services Administration has authorized the use of this commercial item description(CID) as a replacement for MIL-C-62499

CUSHION ASSEMBLIES (METRIC)