GOST R ISO 16962-2012 钢表面锌基和/或铝基镀层. 采用辉光放电原子发射光谱法对单位面积镀层厚度, 化学成分和质量的测定
Zinc and/or aluminium based coatings on steel. Determination of coating thickness, chemical composition and mass per unit area byglow discharge atomic emission spectrometry method
GB/T 24514-2009 钢表面锌基和(或)铝基镀层单位面积镀层质量和化学成分测定.重量法、电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法
本标准规定了用重量法测定单位面积镀层质量的方法，以及用电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法测定钢表面锌基和(或)铝基镀层单位面积镀层质量和化学成分的方法。 本标准所述钢表面锌基和(或)铝基镀层，包括热镀和电镀纯锌镀层、热镀锌铁合金镀层、电镀锌镍合金镀层、热镀铝锌镀层(5%铝)和热镀铝
Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GOST R ISO 17925-2012 钢表面锌基和/或铝基镀层. 单位面积镀层质量和化学成分的测定. 重量法, 电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法
Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetry, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods
YB/T 5357-2009 钢丝镀层 锌或锌-5%铝合金
本标准规定了圓形鋼絲鋅或鋅-5%%鋁合金鍍層的技术要求、试验方法及檢驗規則。 本标准适用于各种用途的热浸镀 ，电镀镀层(锌或锌-5%钻合金)的钢丝
KS D 8304-2013(2018 钢铁表面镀锌层
Electroplated coatings of zinc on iron or steel
GB/T 29559-2013 表面化学分析 辉光放电原子发射光谱 锌和/或铝基合金镀层的分析
本标准规定了辉光放电原子发射光谱法分析锌和/或铝基合金镀层中镀层厚度、镀层质量(单位面积)和金属镀层中化学成分。需要考虑的合金化元素有镍、铁、硅、铅和锑。本标准适用的元素质量分数范围:锌(0.01%~100%),铝(0.01%~100%),镍(0.01%~20%),铁(0.01%~20%),硅
Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
NF A35-035:2001 钢产品.热镀锌或锌铝镀层的预应力光面钢丝和7股纲绞线
Steel products - Hot-dip zinc or zinc-aluminium coated prestressing smooth wires and 7-wire strands.
ISO 19598:2016 金属镀层. 附加Cr(VI)处理的铁或钢表面锌和锌合金电镀层
Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
BS EN ISO 19598:2016 金属镀层. 附加Cr(VI)处理的铁或钢表面锌和锌合金电镀层
Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
AS 1397-1993 钢板和钢带 热浸镀锌或镀铝/锌
Specifies requirements for formable and structural grades of hot-dipped zinc-coated and aluminium/zinc-coated sheet and strip, up to and including 5.0
Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
NF A91-460:1977 表面处理.铁和钢表面上的释锌层.(粉未镀锌)
SURFACE TREATMENTS. SHERARDIZED COATINGS ON IRON AND STEEL (SHERARDIZATION).
DIN 50979:2008 金属镀层.附加铬Cr(VI)处理的铁或钢表面锌和锌合金静电镀层
This standard applies to electrodeposited zinc and zinc-alloy coatings on iron and steel with Cr(VI)-free passivation. The zinc-alloy coatings contain
Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
AS 1397-2001 钢板和带材.热浸镀锌或镀铝/锌
Specifies requirements for formable and structural grades of hot-dip zinc-coated and aluminium/zinc-coated steel sheet and strip, up to and including
Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS/NZS 4534-2006 钢丝上的锌和锌/铝合金镀层
Specifies requirements for the mass, quality and testing of zinc and zinc/aluminium alloy on steel wire. The coatings are applied in a continuous
Zinc and zinc/aluminium-alloy coatings on steel wire
T/CAMT 2-2018 《连续热浸镀锌铝合金镀层型钢和钢棒》
本标准规定了连续热浸镀锌铝合金镀层型钢和钢棒的术语和定义、分类、代号和型号、订货内容、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于采用连续热浸镀工艺生产的锌铝合金镀层型钢（包括H型钢、工字钢、角钢和槽钢）和钢棒（包括扁钢和圆钢）（以下简称镀层型钢和钢棒）。本标准涉及的产品
GOST R ISO 16962-2012 钢表面锌基和/或铝基镀层. 采用辉光放电原子发射光谱法对单位面积镀层厚度, 化学成分和质量的测定
Zinc and/or aluminium based coatings on steel. Determination of coating thickness, chemical composition and mass per unit area byglow discharge atomic emission spectrometry method
GB/T 24514-2009 钢表面锌基和(或)铝基镀层单位面积镀层质量和化学成分测定.重量法、电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法
本标准规定了用重量法测定单位面积镀层质量的方法，以及用电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法测定钢表面锌基和(或)铝基镀层单位面积镀层质量和化学成分的方法。 本标准所述钢表面锌基和(或)铝基镀层，包括热镀和电镀纯锌镀层、热镀锌铁合金镀层、电镀锌镍合金镀层、热镀铝锌镀层(5%铝)和热镀铝
Zinc and/or aluminium based coatings on steel.Determination of coating mass per unit area and chemical composition.Gravimetry,inductively coupled plasma atomic emission spectrometry and flame atomic absorption spectrometry
GOST R ISO 17925-2012 钢表面锌基和/或铝基镀层. 单位面积镀层质量和化学成分的测定. 重量法, 电感耦合等离子体原子发射光谱法和火焰原子吸收光谱法
Zinc and/or aluminium based coatings on steel. Determination of chemical composition and coating mass per unit area. Gravimetry, atomic emission spectrometry with inductively coupled plasma and flame atomic absorption spectrometry methods
YB/T 5357-2009 钢丝镀层 锌或锌-5%铝合金
本标准规定了圓形鋼絲鋅或鋅-5%%鋁合金鍍層的技术要求、试验方法及檢驗規則。 本标准适用于各种用途的热浸镀 ，电镀镀层(锌或锌-5%钻合金)的钢丝
KS D 8304-2013(2018 钢铁表面镀锌层
Electroplated coatings of zinc on iron or steel
GB/T 29559-2013 表面化学分析 辉光放电原子发射光谱 锌和/或铝基合金镀层的分析
本标准规定了辉光放电原子发射光谱法分析锌和/或铝基合金镀层中镀层厚度、镀层质量(单位面积)和金属镀层中化学成分。需要考虑的合金化元素有镍、铁、硅、铅和锑。本标准适用的元素质量分数范围:锌(0.01%~100%),铝(0.01%~100%),镍(0.01%~20%),铁(0.01%~20%),硅
Surface chemical analysis.Analysis of zinc and/or aluminium based metallic coatings by glow discharge optical emission spectrometry
NF A35-035:2001 钢产品.热镀锌或锌铝镀层的预应力光面钢丝和7股纲绞线
Steel products - Hot-dip zinc or zinc-aluminium coated prestressing smooth wires and 7-wire strands.
ISO 19598:2016 金属镀层. 附加Cr(VI)处理的铁或钢表面锌和锌合金电镀层
Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
BS EN ISO 19598:2016 金属镀层. 附加Cr(VI)处理的铁或钢表面锌和锌合金电镀层
Metallic coatings. Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
AS 1397-1993 钢板和钢带 热浸镀锌或镀铝/锌
Specifies requirements for formable and structural grades of hot-dipped zinc-coated and aluminium/zinc-coated sheet and strip, up to and including 5.0
Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
NF A91-460:1977 表面处理.铁和钢表面上的释锌层.(粉未镀锌)
SURFACE TREATMENTS. SHERARDIZED COATINGS ON IRON AND STEEL (SHERARDIZATION).
DIN 50979:2008 金属镀层.附加铬Cr(VI)处理的铁或钢表面锌和锌合金静电镀层
This standard applies to electrodeposited zinc and zinc-alloy coatings on iron and steel with Cr(VI)-free passivation. The zinc-alloy coatings contain
Metallic coatings - Electroplated coatings of zinc and zinc alloys on iron or steel with supplementary Cr(VI)-free treatment
AS 1397-2001 钢板和带材.热浸镀锌或镀铝/锌
Specifies requirements for formable and structural grades of hot-dip zinc-coated and aluminium/zinc-coated steel sheet and strip, up to and including
Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated
AS/NZS 4534-2006 钢丝上的锌和锌/铝合金镀层
Specifies requirements for the mass, quality and testing of zinc and zinc/aluminium alloy on steel wire. The coatings are applied in a continuous
Zinc and zinc/aluminium-alloy coatings on steel wire
T/CAMT 2-2018 《连续热浸镀锌铝合金镀层型钢和钢棒》
本标准规定了连续热浸镀锌铝合金镀层型钢和钢棒的术语和定义、分类、代号和型号、订货内容、技术要求、试验方法、检验规则、包装、标志和质量证明书。 本标准适用于采用连续热浸镀工艺生产的锌铝合金镀层型钢（包括H型钢、工字钢、角钢和槽钢）和钢棒（包括扁钢和圆钢）（以下简称镀层型钢和钢棒）。本标准涉及的产品
编辑：北检院编辑部
