耐热钢钢板和钢带检测

GB/T 4238-2015 耐热钢钢板和钢带

本标准规定了耐热钢钢板和钢带的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于热轧和冷轧耐热钢钢板和钢带

Heat-resisting steel plate,sheet and strip

GB/T 4238-2007 耐热钢钢板和钢带

本标准规定了耐热钢钢板和钢带的牌号、尺寸、允许偏差及外形、技术要求、试验方法、检验规则、包装、标志及产品品质证明书。 本标准适用于热轧和冷轧耐热钢板和钢带

Heat-resisting steel plate, sheet and strip

GB/T 24511-2017 承压设备用不锈钢和耐热钢钢板和钢带

Stainless steel and heat resisting steel plate, sheet and strip for pressure equipments

ASTM A480/A480M-01b 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ASTM A480/A480M-02 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ASTM A480/A480M-01 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ASTM A480/A480M-01 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

SAE AMS5506F-2001 UNS S42000 含113Cr(0.30-0.40C) (SAE 51420)的退火耐腐蚀和耐热钢片,钢带和钢板

This specification covers a corrosion and moderate heat resistant steel in the form of sheet, strip, and plate. Primarily for parts, such as snap

Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed UNS S42000

SAE AMS5520G-2009 15Cr-7.1Ni-2.5Mo-1.1Al溶液热处理沉淀硬化的耐腐蚀耐热钢片,钢带,钢箔和钢板

This specification covers a corrosion and moderate heat resistant steel in the form of sheet, strip, foil, and plate. These products have been used

Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate 15Cr 7.1Ni 2.5Mo 1.1Al Solution Heat Treated, Precipitation Hardenable

SAE AMS6385J-2011 含有0.65Si,1.25Cr,0.50Mo和0.25V(0.27-0.33C)低合金耐热钢片,钢带和钢板

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate. This material has been used typically for parts

Steel Sheet, Strip, and Plate, Low Alloy, Heat Resistant 0.65Si 1.25Cr 0.50Mo 0.25V (0.27-0.33C)

ASTM A167-99 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范

1.1 This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip.

1.2 The values stated

Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

ASTM A167-99(2004 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范

1.1 This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip.

1.2 The values stated in inch-pound

Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

ASTM A167-99(2009 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范

1.1 This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip.

1.2

Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

T/CNEA 101.23-2021 压水堆承压部件 材料 第23部分：不锈钢和耐热钢轧制钢板、薄板及钢带通用要求

本文件是T/CNEA 101《压水堆承压部件 材料》的第23部分。本文件共计22章，其中，1-3章为规范性条款，4-22章为压水堆承压部件 材料 第23部分：不锈钢和耐热钢轧制钢板、薄板及钢带通用要求主要内容。主要内容包括：订货要求、冶炼、化学成分、尺寸和质量

PWR pressure boundary components—Material— Part 23:General requirements for flat-rolled stainless and heat-resisting steel plate, sheet, and strip

KS D 3732-2002(2017 耐热钢板和钢带的

Heat-resisting steel plates and sheets

GB/T 4238-2015 耐热钢钢板和钢带

本标准规定了耐热钢钢板和钢带的订货内容、尺寸、外形、重量及允许偏差、技术要求、试验方法、检验规则、包装、标志及质量证明书。 本标准适用于热轧和冷轧耐热钢钢板和钢带

Heat-resisting steel plate,sheet and strip

GB/T 4238-2007 耐热钢钢板和钢带

本标准规定了耐热钢钢板和钢带的牌号、尺寸、允许偏差及外形、技术要求、试验方法、检验规则、包装、标志及产品品质证明书。 本标准适用于热轧和冷轧耐热钢板和钢带

Heat-resisting steel plate, sheet and strip

GB/T 24511-2017 承压设备用不锈钢和耐热钢钢板和钢带

Stainless steel and heat resisting steel plate, sheet and strip for pressure equipments

ASTM A480/A480M-01b 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ASTM A480/A480M-02 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ASTM A480/A480M-01 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

ASTM A480/A480M-01 平轧不锈钢和耐热钢板,薄钢板和钢带的一般要求的标准规范

1.1 This specification covers a group of general requirements that, unless otherwise specified in the purchase order or in an individual

Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip

SAE AMS5506F-2001 UNS S42000 含113Cr(0.30-0.40C) (SAE 51420)的退火耐腐蚀和耐热钢片,钢带和钢板

This specification covers a corrosion and moderate heat resistant steel in the form of sheet, strip, and plate. Primarily for parts, such as snap

Steel, Corrosion and Heat Resistant, Sheet, Strip, and Plate 13Cr (0.30 - 0.40C) (SAE 51420) Annealed UNS S42000

SAE AMS5520G-2009 15Cr-7.1Ni-2.5Mo-1.1Al溶液热处理沉淀硬化的耐腐蚀耐热钢片,钢带,钢箔和钢板

This specification covers a corrosion and moderate heat resistant steel in the form of sheet, strip, foil, and plate. These products have been used

Steel, Corrosion and Heat-Resistant, Sheet, Strip, Foil and Plate 15Cr 7.1Ni 2.5Mo 1.1Al Solution Heat Treated, Precipitation Hardenable

SAE AMS6385J-2011 含有0.65Si,1.25Cr,0.50Mo和0.25V(0.27-0.33C)低合金耐热钢片,钢带和钢板

This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate. This material has been used typically for parts

Steel Sheet, Strip, and Plate, Low Alloy, Heat Resistant 0.65Si 1.25Cr 0.50Mo 0.25V (0.27-0.33C)

ASTM A167-99 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范

1.1 This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip.

1.2 The values stated

Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

ASTM A167-99(2004 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范

1.1 This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip.

1.2 The values stated in inch-pound

Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

ASTM A167-99(2009 不锈钢和耐热铬镍钢板、薄钢板及带材的标准规范

1.1 This specification covers stainless and heat-resisting chromium-nickel steel plate, sheet, and strip.

1.2

Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip

T/CNEA 101.23-2021 压水堆承压部件 材料 第23部分：不锈钢和耐热钢轧制钢板、薄板及钢带通用要求

本文件是T/CNEA 101《压水堆承压部件 材料》的第23部分。本文件共计22章，其中，1-3章为规范性条款，4-22章为压水堆承压部件 材料 第23部分：不锈钢和耐热钢轧制钢板、薄板及钢带通用要求主要内容。主要内容包括：订货要求、冶炼、化学成分、尺寸和质量

PWR pressure boundary components—Material— Part 23:General requirements for flat-rolled stainless and heat-resisting steel plate, sheet, and strip

KS D 3732-2002(2017 耐热钢板和钢带的

Heat-resisting steel plates and sheets