龋齿探测设备检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

GOST R 53700-2009 损探测.磁粉检测.第3部分:设备

Non-destructive testing. Magnetic particle testing. Part 3: Equipment

ISO 20339:2017 损检测. 涡流检测设备. 阵探头特征和验证

Non-destructive testing - Equipment for eddy current examination - Array probe characteristics and verification

GB/T 27664.2-2011 损检测.超声检测设备的性能与检验.第2部分:探头

GB/T 27664的本部分规定了下列两类聚焦或非聚焦式超声损检测用探头及其检验方法: a) 产生横波或纵波的单换能器或双换能器接触式探头; b) 液浸式探头。 本部分中规定的与材料有关的超声数值,是基于纵波超声声速为(5920±50) m/s和横波超声声 为(3255士30) m/s的钢

Non-destructive testing.Characterization and verification of ultrasonic test equipment.Part 2:Probes

GB/T 14480.2-2015 损检测仪器 涡流检测设备 第2部分:探头性能和检验

ISO 22232-2:2020 损检测 超声检测设备的性能与检验 第2部分:探头

Non-destructive testing — Characterization and verification of ultrasonic test equipment — Part 2: Probes

EN ISO 22232-2:2020 损检测 超声检测设备的性能与检验 第2部分:探头

This document specifies the characteristics of probes used for non-destructive ultrasonic testing in the following categories with centre frequencies

Non-destructive testing - Characterization and verification of ultrasonic test equipment - Part 2: Probes (ISO 22232-2:2020)

STAS 2123-1976 地质探测设备.十字钻头.地质探测钻探

1.1. Prezentul standard se refer? la sapele ?n cruce (simbol CR) folosite la frezatul caratelor r?mase ?n gaura de sond? ?i a cimentului din

Equipment for geological investigat ion CROSS BIT FOR GKOI.OGICAL 1NVESTIGATION DRILLING

ISO 3452-4:1998 损检测 渗透性探伤检验 第4部分:设备

This European standard specifies the characteristics of equipment used in penetrant testing. The characteristics of equipment required for carrying

Non-destructive testing - Penetrant testing - Part 4: Equipment

BS EN ISO 15548-2:2008 损检测.涡流检验设备.探针特性和验证

This part of ISO 15548 identifies the functional characteristics of a probe and its interconnecting elements and provides methods

Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification

BS EN ISO 15548-2:2013 损检测.涡流检验设备.探针特性和验证

Non-destructive testing. Equipment for eddy current examination. Probe characteristics and verification

ISO 15548-2:2013 损检测. 涡流检测设备. 第2部分: 探头性能和验证

This part of ISO 15548 identifies the functional characteristics of a probe and its interconnecting elements and provides methods

Non-destructive testing.Equipment for eddy current examination.Part 2: Probe characteristics and verification

NF A09-170-2*NF EN ISO 15548-2:2014 损检测. 涡流检测设备. 第2部分: 探头性能和验证

La présente partie de l'ISO 15548 identifie les caractéristiques fonctionnelles d'un capteur à courants de Foucault et de ses éléments d

Non-destructive testing - Equipment for eddy current examination - Part 2 : probe characteristics and verification

TB/T 3341-2013 铁道货车故障轨边图象检测系统(TFDS)探测设备

本标准规定了铁道货车故障轨边图像检测系统(以下简称TFDS)探测设备的组成与功能、技术要求、试验方法、检验规则及标志、包装、运输和储存等。本标准适用于TFDS探测设备的设计、制造、安装和检验

Detection apparatus of trouble of moving freight car detection system

HJB 449.5-2009 鱼-6鱼雷检测设备计量检定规程.第5部分:沉雷探测仪

本部分规定了沉雷探测仪的技术要求、检定条件、检定项目、检定结果的处理与检定周期等。 本部分适用于沉雷探测仪使用中和维修后的检定

Verification regulation for torpedo testing equipments of H/YZQ-006.Part 5:Submerge torpedo detector

NF A09-341:1991 损检测.超声波探伤.监测设备.设置使用的控制卡

Non-destructive testing - Ultrasonic testing - Monitoring of equipment - Setting using control cards

Non-destructive testing - Ultrasonic testing - Monitoring of equipment - Setting using control cards

STAS 5987-1983 地质勘探设备.地质勘探设备上用的挂钩

Prezentul standard se refer? la e?rlige utilizate pentru manevrarea pr?jinilor ?i burlanelor la forajul cu sondeze

Equipmcnt lor geologica] investigation HOOKS FOR PROSPFXTING R1GS

STAS 1968-1980 地质探测的设备.勘探钻头的钻杆和接管

Prezentul standard se refer? la pr?jinile de foraj, cu nipluri de leg?tur?, folosite la forajul cu sondeze

Equipnicnt for gcological invcstigation DR1LL P1PES AND L'NlON Nll'PLE FOR PROSPECTING RIGS

NAVY MIL-D-81622 A VALID NOTICE 1-1988 AN/SQS-13A声纳探测范围设备

MIL-D-¿31622A(AS), dated 17 January 1974, has been reviewed and determined to be current

DETECTING-RANGING SET, SONAR AN/SQS-13A

NAVY MIL-D-81622 A-1974 AN/SQS-13A声纳探测范围设备

echo ranging system capable of rapid search of the area around the point of immersion of the transdqcer, determine the range and bearing of any

DETECTING-RANGING SET, SONAR AN/SQS-13A

NAVY MIL-D-81873-1975 AN/AQS-13B声纳探测范围设备

The equipment covered by this specification shall provide a lightwei&dipped, underwater, detecting-rangi ng system capable of rapid 360 degree

DETECTING-RANGING SET, SONAR AN/AQS-13B

KS B ISO 3454:2015 直接深度探测和悬挂设备

Liquid flow measurement in open channels — Direct depth sounding and suspension equipment

KS B ISO 3454:2020 直接深度探测和悬挂设备

Hydrometry — Direct depth sounding and suspension equipment

JIS F 9401:1996 造船.船舶的回声探测设备

Shipbuilding -- Marine echo-sounding equipment

DIN EN 54-4:1997 火灾探测和报警设备.第4部分:供电设备

The document specifies requirements, methods of test, and performance criteria for control and indicating equipment for use in fire detection and fire

Fire detection and fire alarm systems - Part 4: Power supply equipment; German version EN 54-4:1997

DOD A-A-54793-1993 设备盒(牙齿的)

The General Services Administration has authorized the use of this Commercial Item Description as a replacement for Military Specification

BOXES, SETUP (MAILING, DENTAL)

GA/T 1060.1-2013 便携式放射性物质探测与核素识别设备通用技术要求 第1部分:γ探测设备

GA/T 1060的本部分规定了便携式7放射性物质探测设备的分类分级要求、技术要求、试验方法、检验规则、标志、包装、随机技术文件、运输和贮存。本部分适用于利用各类辐射探测器对γ放射性物质进行探测的便携式设备,是设计、制造、验收和使用此类设备的基本依据

General technical requirements for portable instruments for radioactive material detection and radionuclides identification.Part 1:γ-ray detection instruments

ISO 7240-28:2014 火灾探测和报警系统.第28部分:火灾探测控制设备

Fire detection and alarm systems - Part 28: Fire protection control equipment

ISO 7240-28:2008 火灾探测和报警系统.第28部分:火灾探测控制设备

Fire detection and alarm systems - Part 28: Fire protection control equipment

WS/T 326.2-2010 牙膏功效评价 第2部分:防龋

WS/T 326的本部分规定了牙膏的防龋功效评价及评价方法。 本部分适用于声称具有防龋功效,并且理化性能、卫生安全性能指标符合相应国家标准的牙膏产品

Efficacy evaluation of toothpaste.Part 2:Guidelines for anti-caries efficacy evaluation

SJ 20970-2007 车载式地雷探测设备通用规范

本规范规定了车载式地雷探测设备(以下简称探雷设备)的性能特性、质量保证规定、交货准备等基本要求和说明事项。 本规范适用于探雷设备的论证、设计、制造、检验和验收。手持、机载、艇载及其它用途的探雷设备亦可参照使用

General speciication for vehicular mounted mine detection device

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通