厚度方向性能钢板检测

GB/T 5313-2010 厚度方向性能钢板

本标准规定了钢板的厚度方向性能级别、试验方法及检验规则。厚度方向性能级别是对钢板的抗层状撕裂的能力提供的一种量度，厚度方向性能采用厚度方向拉伸试验的断面收缩率来评定。 本标准适用于厚度为15mm-400mm的镇静钢钢板

Steel plates with through-thickness characteristics

GB/T 5313-1985 厚度方向性能钢板

本标准适用于厚度为15～150mm，屈服点不大于51kgf/mm²（500N/mm²）的镇静钢的钢板。 对于厚度小于15mm和大于150mm或屈服点大于51kgf/mm²（500N/mm²）的钢板应在订货时协商

Steel plate with through-thickness characteristics

ISO 7778:1983 具有/规定厚度方向性能的钢板

Specifies the criteria which shall be satisfied by the qualities of steel plate and wide flats for which trough-tickness reduction of area properties

Steel plate with specified through-thickness characteristics

KS D 0276-1993 钢板和宽扁钢厚度方向性能

이 규격은 두께방향의 단면수축률 특성이 규정된 강판 및 평강이 만족해야 하는 품질기준 및

Specification for through-thickness characteristics of steel plate and wide flat

CNS 13813-1997 钢板及扁钢之厚度方向特性

本标准适用于有规定厚度方向断面缩率时性之钢板及扁钢（以下简称钢料），所须满足之质量基准及试验条件。备考：若事先经买卖双方协议，除标准本规定项目之外，得指定附录之特别质量规定

Specification for Through-Thickness Characteristics of Steel Plate and Wide Flat

KS D 0276-1993(2018 规格可供钢板和宽扁通厚度方向性能

SPECIFICATION FOR THROUGH-THICKNESS CHARACTERISTICS OF STEEL PLATE AND WIDE FLAT

YB/T 4831-2020 厚度方向性能热轧H型钢

GB/T 37800-2019 热轧纵向变厚度钢板

Hot rolled longitudinally profiled steel plate

GOST 28870-1990 钢.在厚度方向上轧制厚板的拉伸试验法

Steel. Methods tensile tests of rolled thick-plates in the thickness direction

MSZ 75-1981 钢板厚度延展性

IRAM 507-N.I.O.-1946 厚度超过4.75mm的钢板（厚钢板）

B-l Esta norma se refiere a las chapas de acero de espesor mayor de 4,75 mm, común mente denominadas chapas gruesas, que se destinan

ABNT PB-35-1973 碳钢厚钢板厚度与容差

1.1 Esta Padroniza??o fixa a série de espessuras adotadas para as chapas grossas de a?o carbono, com os pesos equivalentes, inclusive espessuras padr

ISO/R 88:1959 厚度小于3mm的钢板和钢带的反向弯曲试验

Reverse bend testing of steel sheet and strip less than 3 mm thick

JIS G 3199:1992 钢板和宽平板贯穿厚度特性规范

この規格は，厚さ方向の絞り特性が規定された鋼板及び平鋼が満足すべき品質基準及び試験条件についで規定する

Specification for through-thickness characteristics of steel plate and wide flat

JIS G 3199:2009 钢板和宽平板贯穿厚度特性规范

This Standard specifies the criteria of quality satisfied by the steel plate, wide flat and section (hereafter referred to as "steel product

Specification for through-thickness characteristics of steel plate, wide flat and sections

GB/T 5313-2010 厚度方向性能钢板

本标准规定了钢板的厚度方向性能级别、试验方法及检验规则。厚度方向性能级别是对钢板的抗层状撕裂的能力提供的一种量度，厚度方向性能采用厚度方向拉伸试验的断面收缩率来评定。 本标准适用于厚度为15mm-400mm的镇静钢钢板

Steel plates with through-thickness characteristics

GB/T 5313-1985 厚度方向性能钢板

本标准适用于厚度为15～150mm，屈服点不大于51kgf/mm²（500N/mm²）的镇静钢的钢板。 对于厚度小于15mm和大于150mm或屈服点大于51kgf/mm²（500N/mm²）的钢板应在订货时协商

Steel plate with through-thickness characteristics

ISO 7778:1983 具有/规定厚度方向性能的钢板

Specifies the criteria which shall be satisfied by the qualities of steel plate and wide flats for which trough-tickness reduction of area properties

Steel plate with specified through-thickness characteristics

KS D 0276-1993 钢板和宽扁钢厚度方向性能

이 규격은 두께방향의 단면수축률 특성이 규정된 강판 및 평강이 만족해야 하는 품질기준 및

Specification for through-thickness characteristics of steel plate and wide flat

CNS 13813-1997 钢板及扁钢之厚度方向特性

本标准适用于有规定厚度方向断面缩率时性之钢板及扁钢（以下简称钢料），所须满足之质量基准及试验条件。备考：若事先经买卖双方协议，除标准本规定项目之外，得指定附录之特别质量规定

Specification for Through-Thickness Characteristics of Steel Plate and Wide Flat

KS D 0276-1993(2018 规格可供钢板和宽扁通厚度方向性能

SPECIFICATION FOR THROUGH-THICKNESS CHARACTERISTICS OF STEEL PLATE AND WIDE FLAT

YB/T 4831-2020 厚度方向性能热轧H型钢

GB/T 37800-2019 热轧纵向变厚度钢板

Hot rolled longitudinally profiled steel plate

GOST 28870-1990 钢.在厚度方向上轧制厚板的拉伸试验法

Steel. Methods tensile tests of rolled thick-plates in the thickness direction

MSZ 75-1981 钢板厚度延展性

IRAM 507-N.I.O.-1946 厚度超过4.75mm的钢板（厚钢板）

B-l Esta norma se refiere a las chapas de acero de espesor mayor de 4,75 mm, común mente denominadas chapas gruesas, que se destinan

ABNT PB-35-1973 碳钢厚钢板厚度与容差

1.1 Esta Padroniza??o fixa a série de espessuras adotadas para as chapas grossas de a?o carbono, com os pesos equivalentes, inclusive espessuras padr

ISO/R 88:1959 厚度小于3mm的钢板和钢带的反向弯曲试验

Reverse bend testing of steel sheet and strip less than 3 mm thick

JIS G 3199:1992 钢板和宽平板贯穿厚度特性规范

この規格は，厚さ方向の絞り特性が規定された鋼板及び平鋼が満足すべき品質基準及び試験条件についで規定する

Specification for through-thickness characteristics of steel plate and wide flat

JIS G 3199:2009 钢板和宽平板贯穿厚度特性规范

This Standard specifies the criteria of quality satisfied by the steel plate, wide flat and section (hereafter referred to as "steel product

Specification for through-thickness characteristics of steel plate, wide flat and sections