SIS SS 2836-1988 六角凹头螺钉键．扭矩测试
Standarden g?ller sexkantsnycklar enligt SS 795 och SS 875
Hexagon socket screw keys — Torque testing
BS ISO 4229:2009 螺钉和螺母用装配工具.较低扭转力应用的单头扳手.前端和测试扭矩外形尺寸最大值
Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques
ISO 4229:2009 螺钉和螺母用装配工具.工程师用低扭矩单头扳手.最大头部尺寸及测试扭矩
Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques
KS B 0551-2015(2020 部分7的紧固件的生物力学性能:螺栓和螺钉扭矩试验和断裂扭矩公称直径为1至10mm
Mechnical properties of fasteners — Part 7: Torsional test and minimum fracture torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS EN 20898-7:1995 紧固件机械性能.标称直径为1MM到10MM的螺栓和螺钉的扭转试验和最小扭矩
This part of ISO 898 specifies a torsional test for the delermination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm
Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
NF E74-301:2009 螺钉和螺母的组装工具.工程使用低扭矩单头扳手.扳手头和试验扭矩的最大外尺寸
Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques.
KS B 0551-2015 紧固件机械性质.第7部分:直径为1～10mm的螺纹和螺栓的扭应力测试和最小断裂转矩
Mechnical properties of fasteners — Part 7: Torsional test and minimum fracture torques for bolts and screws with nominal diameters 1 mm to 10 mm
ISO 4229:2017 螺钉和螺母的装配工具-单头工程师&apos；低扭矩用s型扳手.头部的最大外部尺寸和试验扭矩
Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques
YY/T 1506-2016 外科植入物 金属接骨螺钉旋动扭矩试验方法
DB32/T 4275-2022 钢结构用高强度大六角头螺栓连接副扭矩系数的测定
本文件规定了钢结构用高强度大六角头螺栓连接副扭矩系数测定的术语和定义、试验原理、试验条 件、试验样品、仪器设备、试验步骤、试验数据处理和试验报告。 本文件适用于 GB/T 1231-2006 中规格为 M12～M30、性能等级 8.8S 和 10.9S 的钢结构用高强度大 六角头螺栓连接副扭矩系数的
ISO 898-7:1992 紧固件机械性能 第7部分:螺栓与螺钉的扭矩试验和最小扭矩公称直径1mm～10mm
Applies to bolts and screws of property classes 8.8 to 12.9 in accordance with ISO 898-1 with thread less than M3 for which no breaking and proof
Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
KS B 0551-1996 紧固件机械性质.第7部分:直径为1∼10mm的螺纹及螺栓的扭应力测试及最小断裂转矩
이 규격은 ISO 898-1에 따른 강도 구분이 8.8∼12.9이고, 호칭 지름 1∼10m
Mechanical properties of fasteners Part 7 : Torsional test and minimum fracture torques for bolts and screws with nominal diameters 1 mm to 10 mm
ANSI/SCTE 29-2012 连接固定螺钉的连接导线穿过的扭矩要求
Torque Requirements for Bond Wire Penetration of Bonding Set Screw
DS/EN 20898-7:1995 紧固件的机械特性．第7部分：标称直径为1mm至10mm螺栓与螺钉的扭矩试验和最小扭矩
This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
GB/T 3098.13-1996 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm
本标准规定了公称直径为1～10mm、性能等级为8.8～12.9级（GB3098.1）的螺栓与螺钉的扭矩试验和破坏扭矩值。 本标准适用于螺纹规格小于M3，在GB3098.1中未规定最小拉力载荷与保证载荷的螺栓与螺钉；以及公称直径3～10mm，但长度太短而不能实施拉力试验的螺栓与螺钉
Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
SIS SS 2836-1988 六角凹头螺钉键．扭矩测试
Standarden g?ller sexkantsnycklar enligt SS 795 och SS 875
Hexagon socket screw keys — Torque testing
BS ISO 4229:2009 螺钉和螺母用装配工具.较低扭转力应用的单头扳手.前端和测试扭矩外形尺寸最大值
Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques
ISO 4229:2009 螺钉和螺母用装配工具.工程师用低扭矩单头扳手.最大头部尺寸及测试扭矩
Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques
KS B 0551-2015(2020 部分7的紧固件的生物力学性能:螺栓和螺钉扭矩试验和断裂扭矩公称直径为1至10mm
Mechnical properties of fasteners — Part 7: Torsional test and minimum fracture torques for bolts and screws with nominal diameters 1 mm to 10 mm
BS EN 20898-7:1995 紧固件机械性能.标称直径为1MM到10MM的螺栓和螺钉的扭转试验和最小扭矩
This part of ISO 898 specifies a torsional test for the delermination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm
Mechanical properties of fasteners - Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
NF E74-301:2009 螺钉和螺母的组装工具.工程使用低扭矩单头扳手.扳手头和试验扭矩的最大外尺寸
Assembly tools for screws and nuts - Single-head engineer's wrenches for lower torque applications - Maximum outside dimensions of heads and test torques.
KS B 0551-2015 紧固件机械性质.第7部分:直径为1～10mm的螺纹和螺栓的扭应力测试和最小断裂转矩
Mechnical properties of fasteners — Part 7: Torsional test and minimum fracture torques for bolts and screws with nominal diameters 1 mm to 10 mm
ISO 4229:2017 螺钉和螺母的装配工具-单头工程师&apos；低扭矩用s型扳手.头部的最大外部尺寸和试验扭矩
Assembly tools for screws and nuts — Single-head engineer's wrenches for lower torque applications — Maximum outside dimensions of heads and test torques
YY/T 1506-2016 外科植入物 金属接骨螺钉旋动扭矩试验方法
DB32/T 4275-2022 钢结构用高强度大六角头螺栓连接副扭矩系数的测定
本文件规定了钢结构用高强度大六角头螺栓连接副扭矩系数测定的术语和定义、试验原理、试验条 件、试验样品、仪器设备、试验步骤、试验数据处理和试验报告。 本文件适用于 GB/T 1231-2006 中规格为 M12～M30、性能等级 8.8S 和 10.9S 的钢结构用高强度大 六角头螺栓连接副扭矩系数的
ISO 898-7:1992 紧固件机械性能 第7部分:螺栓与螺钉的扭矩试验和最小扭矩公称直径1mm～10mm
Applies to bolts and screws of property classes 8.8 to 12.9 in accordance with ISO 898-1 with thread less than M3 for which no breaking and proof
Mechanical properties of fasteners; part 7: torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
KS B 0551-1996 紧固件机械性质.第7部分:直径为1∼10mm的螺纹及螺栓的扭应力测试及最小断裂转矩
이 규격은 ISO 898-1에 따른 강도 구분이 8.8∼12.9이고, 호칭 지름 1∼10m
Mechanical properties of fasteners Part 7 : Torsional test and minimum fracture torques for bolts and screws with nominal diameters 1 mm to 10 mm
ANSI/SCTE 29-2012 连接固定螺钉的连接导线穿过的扭矩要求
Torque Requirements for Bond Wire Penetration of Bonding Set Screw
DS/EN 20898-7:1995 紧固件的机械特性．第7部分：标称直径为1mm至10mm螺栓与螺钉的扭矩试验和最小扭矩
This part of ISO 898 specifies a torsional test for the determination of the breaking torque of bolts and screws with nominal diameters 1 mm to 10 mm
Mechanical properties of fasteners - Part 7: Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm
GB/T 3098.13-1996 紧固件机械性能 螺栓与螺钉的扭矩试验和破坏扭矩公称直径1～10mm
本标准规定了公称直径为1～10mm、性能等级为8.8～12.9级（GB3098.1）的螺栓与螺钉的扭矩试验和破坏扭矩值。 本标准适用于螺纹规格小于M3，在GB3098.1中未规定最小拉力载荷与保证载荷的螺栓与螺钉；以及公称直径3～10mm，但长度太短而不能实施拉力试验的螺栓与螺钉
Mechanical properties of fasteners--Torsional test and minimum torques for bolts and screws with nominal diameters 1mm to 10mm
编辑：北检院编辑部
