成束燃烧试验装置检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

JB/T 4278.15-2011 橡皮塑料电线电缆试验仪器设备检定方法.第15部分:成束燃烧试验装置

JB/T 4278的本部分规定了成束燃烧试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果及处理。 本部分适用于新制造、使用中和维修后的成束燃烧试验装置的检定

Verification procedure for test equipment of rubber plastic wire and cable.Part 15: Bundle burning test device

ISO/TR 9122-4:1993 燃烧生成物毒性试验 第4部分:火灾模型(小型试验中采用的燃烧炉和燃烧装置)

Defines the criteria for an acceptable fire model, reviews existing fire models ("box" furnace models, tube furnace models, radiant heat models

Toxicity testing of fire effluents; part 4: the fire model (furnaces and combustion apparatus used in small-scale testing)

GB/T 18380.31-2022 电缆和光缆在火焰条件下的燃烧试验 第31部分:垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置

Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus

BS ISO TR 9122-4:1996 燃烧废物的毒性试验.燃烧模式(小型试验中使用的燃烧炉和燃烧装置)

Describes fire models used in fire effluent toxicity studies

Toxicity testing of fire effluents - The fire model (furnaces and combustion apparatus used in small-scale testing)

GB/T 18380.3-2001 电缆在火焰条件下的燃烧试验 第3部分;成束电线或电缆的燃烧试验方法

本标准规定了一种型式认可试验方法,用来评价成束电缆在规定条件下抑制火焰蔓延的能力,其与电缆的用途,即电力、通信(包括数据传输电缆和光缆)等关。 根据被试试样的非金属材料体积和燃烧时间划分为三类(参见表1);它们与电缆在实际敷设中不同的安全水准没有必然的关系。A类的安装方法有两种

Tests on electric cables under fire conditions Part 3: Test on bunched wires or cables

GB/T 18380.31-2008 电缆和光缆在火焰条件下的燃烧试验.第31部分:垂直安装的成束电线电缆火焰垂直蔓延试验.试验装置

GB/T 18380的第31、32、33、34、35、36部分规定了一种试验方法,用来评价垂直安装的成束电线电缆或光缆在规定条件下抑制火焰垂直蔓延的能力。 GB/T 18380的本部分详述了试验装置及其布置和校准

Test on electric and optical fibre cables under fire conditions.Part 31:Test for vertical flame spread of vertically-mounted bunched wires or cables.Apparatus

CJ/T 3075.2-1998 燃气燃烧器具实验室.试验装置和仪器

Laboratory of gas burning appliances.Test equipment and device

BS EN 13274-4:2001 呼吸保护装置.试验方法.燃烧试验

This European Standard specifies methods for flame tests to be applied to respiratory protective devices

Respiratory protective devices - Methods of test - Flame tests

BS EN 13274-4:2020 呼吸保护装置.试验方法.燃烧试验

This European Standard specifies methods for flame tests to be applied to respiratory protective devices

Respiratory protective devices - Methods of test - Flame tests

KS F ISO TR 9122-4:2015 燃烧废物的毒性试验.第4部分:燃烧模式(小型试验中使用的燃烧炉和燃烧装置)

Toxicity testing of fire effluents-Part 4:The fire model (furanaces and combustion apparatus used in small-scale testing)

KS F ISO TR 9122-4:2004 燃烧废物的毒性试验.第4部分:燃烧模式(小型试验中使用的燃烧炉和燃烧装置)

이 규격의 내용은 표준 시험에 사용되는 화재 모델의 사용에 대한 제안과 함께 화재 생성

Toxicity testing of fire effluents-Part 4:The fire model (furanaces and combustion apparatus used in small-scale testing)

JJF(石化) 032-2020 易燃固体燃烧速率试验装置校准规范

Calibration Specification for Burning Rate of Flammable Solids Test Device

JIS A 1706:1994 住宅内燃烧装置安全性试验方法

Method of safety test for combustion of equipment units for dwellings

DIN 4731:1989 装有气化燃烧器的烧油加热装置.要求、试验和标记

The standard applies for mass produced oil-fired heating units made of cast iron or steel and equipped with vaporizing burners having a nominal heat

Oil-fired heated units with vaporizing burners; requirements, testing, marking

JJG(轻工) 94-1992 水平法地毯燃烧试验装置检定规程

JB/T 4278.15-2011 橡皮塑料电线电缆试验仪器设备检定方法.第15部分:成束燃烧试验装置

JB/T 4278的本部分规定了成束燃烧试验装置的检定项目与技术要求、检定用器具、检定方法和检定结果及处理。 本部分适用于新制造、使用中和维修后的成束燃烧试验装置的检定

Verification procedure for test equipment of rubber plastic wire and cable.Part 15: Bundle burning test device

ISO/TR 9122-4:1993 燃烧生成物毒性试验 第4部分:火灾模型(小型试验中采用的燃烧炉和燃烧装置)

Defines the criteria for an acceptable fire model, reviews existing fire models ("box" furnace models, tube furnace models, radiant heat models

Toxicity testing of fire effluents; part 4: the fire model (furnaces and combustion apparatus used in small-scale testing)

GB/T 18380.31-2022 电缆和光缆在火焰条件下的燃烧试验 第31部分:垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置

Tests on electric and optical fibre cables under fire conditions—Part 31: Test for vertical flame spread of vertically-mounted bunched wires or cables—Apparatus

BS ISO TR 9122-4:1996 燃烧废物的毒性试验.燃烧模式(小型试验中使用的燃烧炉和燃烧装置)

Describes fire models used in fire effluent toxicity studies

Toxicity testing of fire effluents - The fire model (furnaces and combustion apparatus used in small-scale testing)

GB/T 18380.3-2001 电缆在火焰条件下的燃烧试验 第3部分;成束电线或电缆的燃烧试验方法

本标准规定了一种型式认可试验方法,用来评价成束电缆在规定条件下抑制火焰蔓延的能力,其与电缆的用途,即电力、通信(包括数据传输电缆和光缆)等关。 根据被试试样的非金属材料体积和燃烧时间划分为三类(参见表1);它们与电缆在实际敷设中不同的安全水准没有必然的关系。A类的安装方法有两种

Tests on electric cables under fire conditions Part 3: Test on bunched wires or cables

GB/T 18380.31-2008 电缆和光缆在火焰条件下的燃烧试验.第31部分:垂直安装的成束电线电缆火焰垂直蔓延试验.试验装置

GB/T 18380的第31、32、33、34、35、36部分规定了一种试验方法,用来评价垂直安装的成束电线电缆或光缆在规定条件下抑制火焰垂直蔓延的能力。 GB/T 18380的本部分详述了试验装置及其布置和校准

Test on electric and optical fibre cables under fire conditions.Part 31:Test for vertical flame spread of vertically-mounted bunched wires or cables.Apparatus

CJ/T 3075.2-1998 燃气燃烧器具实验室.试验装置和仪器

Laboratory of gas burning appliances.Test equipment and device

BS EN 13274-4:2001 呼吸保护装置.试验方法.燃烧试验

This European Standard specifies methods for flame tests to be applied to respiratory protective devices

Respiratory protective devices - Methods of test - Flame tests

BS EN 13274-4:2020 呼吸保护装置.试验方法.燃烧试验

This European Standard specifies methods for flame tests to be applied to respiratory protective devices

Respiratory protective devices - Methods of test - Flame tests

KS F ISO TR 9122-4:2015 燃烧废物的毒性试验.第4部分:燃烧模式(小型试验中使用的燃烧炉和燃烧装置)

Toxicity testing of fire effluents-Part 4:The fire model (furanaces and combustion apparatus used in small-scale testing)

KS F ISO TR 9122-4:2004 燃烧废物的毒性试验.第4部分:燃烧模式(小型试验中使用的燃烧炉和燃烧装置)

이 규격의 내용은 표준 시험에 사용되는 화재 모델의 사용에 대한 제안과 함께 화재 생성

Toxicity testing of fire effluents-Part 4:The fire model (furanaces and combustion apparatus used in small-scale testing)

JJF(石化) 032-2020 易燃固体燃烧速率试验装置校准规范

Calibration Specification for Burning Rate of Flammable Solids Test Device

JIS A 1706:1994 住宅内燃烧装置安全性试验方法

Method of safety test for combustion of equipment units for dwellings

DIN 4731:1989 装有气化燃烧器的烧油加热装置.要求、试验和标记

The standard applies for mass produced oil-fired heating units made of cast iron or steel and equipped with vaporizing burners having a nominal heat

Oil-fired heated units with vaporizing burners; requirements, testing, marking

JJG(轻工) 94-1992 水平法地毯燃烧试验装置检定规程

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通