GB/T 21437.2-2021 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第2部分：沿电源线的电瞬态传导发射和抗扰性
Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only
DL/T 2120-2020 GIS 变电站开关操作瞬态电磁骚扰抗扰度试验
GB/T 21437.3-2021 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第3部分：对耦合到非电源线电瞬态的抗扰性
Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
GB/T 21437.3-2012 道路车辆 由传导和耦合引起的电骚扰 第3部分：除电源线外的导线通过容性和感性耦合的电瞬态发射
GB/T 21437的本部分建立了一种台架试验方法,用以评价被测装置(DUTs)对耦合到非电源线路的电瞬态发射的抗干扰性能、试验瞬态脉冲模拟快速电瞬态骚扰和慢速电瞬态骚扰,例如感性负载切换、继电器触点跳起等引起的瞬态骚扰、本部分提供了三种试验方法:本部分适用于标称电压12 V、24 V或42 V
Road vehicles.Electrical disturbances from conduction and coupling.Part 3:Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
SAE J1113/11-2012 电源线传导瞬变的抗扰度
This SAE Standard defines methods and apparatus to evaluate electronic devices for immunity to potential interference from conducted transients along
Immunity to Conducted Transients on Power Leads
DS 5103:1987 电气设备对传导瞬变骚扰的抗扰度
Form?let med denne standard er at definere transientmilj?er og specificere repr?sentative pr?vnings-transienter samt at opstille metoder til at afpr
Immunity of electrical equipment against conducted transients
BS DD IEC/TS 62215-2:2007 集成电路.脉冲抗扰度的测量.同步瞬时注射法
IEC/Ts 62215-2，which is a technical specification，contains general information and definitions on the test method to evaluate the immunity
Integrated circuits - Measurement of impulse immunity - Synchronous transient injection method
KS C 9610-4-4-2020 电磁兼容性（Emc） - 第4-4部分:测试和测量技术 - 电快速瞬态/突发抗扰度测试
Electromagnetic compatibility(EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test
IEC 61000-4-4-2012 电磁兼容性（Emc） - 第4-4部分:测试和测量技术 - 电快速瞬态/突发抗扰度测试
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 21437.2-2008 道路车辆.由传导和耦合引起的电骚扰.第2部分:沿电源线的电瞬态传导
本部分规定了安装在乘用车及12V电气系统的轻型商用车或24V电气系统的商用车上设备的传导电瞬态电磁兼容性测试的台架试验，包括瞬态注入和测量。本部分还规定了瞬态抗扰性失效模式严重程度分类。 本部分适用于各种动力系统（例如火花点火发动机或柴油发动机，或电动机）的道路车辆
Road vehicles.Electrical disturbances from conduction and coupling.Part 2:Electrical transient conduction along supply lines only
IEC TS 62215-2-2007 集成电路脉冲抗扰度测量第2部分:同步瞬态注入法
Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method
IEC 62215-3-2013 集成电路 - 脉冲抗扰度测量 - 第3部分:非同步瞬态注入法
Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
IEC TS 62215-2:2007 集成电路.脉冲抗扰度的测量.第2部分:同步瞬时注射法
IEC/Ts 62215-2，which is a technical specification，contains general information and definitions on the test method to evaluate the immunity
Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method
GB/T 40309-2021 电动平衡车 电磁兼容 发射和抗扰度要求
Electrical self-balancing vehicle—Electromagnetic compatibility—Emission and immunity requirements
BS EN 62215-3:2013 集成电路.脉冲抗干扰度测量.第3部分:非同步瞬时注射法
Integrated circuits. Measurement of impulse immunity. Non-synchronous transient injection method
GB/T 21437.2-2021 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第2部分：沿电源线的电瞬态传导发射和抗扰性
Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 2: Electrical transient conduction along supply lines only
DL/T 2120-2020 GIS 变电站开关操作瞬态电磁骚扰抗扰度试验
GB/T 21437.3-2021 道路车辆 电气/电子部件对传导和耦合引起的电骚扰试验方法 第3部分：对耦合到非电源线电瞬态的抗扰性
Road vehicles—Test method of electrical disturbances from conduction and coupling—Part 3: Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
GB/T 21437.3-2012 道路车辆 由传导和耦合引起的电骚扰 第3部分：除电源线外的导线通过容性和感性耦合的电瞬态发射
GB/T 21437的本部分建立了一种台架试验方法,用以评价被测装置(DUTs)对耦合到非电源线路的电瞬态发射的抗干扰性能、试验瞬态脉冲模拟快速电瞬态骚扰和慢速电瞬态骚扰,例如感性负载切换、继电器触点跳起等引起的瞬态骚扰、本部分提供了三种试验方法:本部分适用于标称电压12 V、24 V或42 V
Road vehicles.Electrical disturbances from conduction and coupling.Part 3:Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines
SAE J1113/11-2012 电源线传导瞬变的抗扰度
This SAE Standard defines methods and apparatus to evaluate electronic devices for immunity to potential interference from conducted transients along
Immunity to Conducted Transients on Power Leads
DS 5103:1987 电气设备对传导瞬变骚扰的抗扰度
Form?let med denne standard er at definere transientmilj?er og specificere repr?sentative pr?vnings-transienter samt at opstille metoder til at afpr
Immunity of electrical equipment against conducted transients
BS DD IEC/TS 62215-2:2007 集成电路.脉冲抗扰度的测量.同步瞬时注射法
IEC/Ts 62215-2，which is a technical specification，contains general information and definitions on the test method to evaluate the immunity
Integrated circuits - Measurement of impulse immunity - Synchronous transient injection method
KS C 9610-4-4-2020 电磁兼容性（Emc） - 第4-4部分:测试和测量技术 - 电快速瞬态/突发抗扰度测试
Electromagnetic compatibility(EMC) — Part 4-4: Testing and measurement techniques — Electrical fast transient/burst immunity test
IEC 61000-4-4-2012 电磁兼容性（Emc） - 第4-4部分:测试和测量技术 - 电快速瞬态/突发抗扰度测试
Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test
GB/T 21437.2-2008 道路车辆.由传导和耦合引起的电骚扰.第2部分:沿电源线的电瞬态传导
本部分规定了安装在乘用车及12V电气系统的轻型商用车或24V电气系统的商用车上设备的传导电瞬态电磁兼容性测试的台架试验，包括瞬态注入和测量。本部分还规定了瞬态抗扰性失效模式严重程度分类。 本部分适用于各种动力系统（例如火花点火发动机或柴油发动机，或电动机）的道路车辆
Road vehicles.Electrical disturbances from conduction and coupling.Part 2:Electrical transient conduction along supply lines only
IEC TS 62215-2-2007 集成电路脉冲抗扰度测量第2部分:同步瞬态注入法
Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method
IEC 62215-3-2013 集成电路 - 脉冲抗扰度测量 - 第3部分:非同步瞬态注入法
Integrated circuits - Measurement of impulse immunity - Part 3: Non-synchronous transient injection method
IEC TS 62215-2:2007 集成电路.脉冲抗扰度的测量.第2部分:同步瞬时注射法
IEC/Ts 62215-2，which is a technical specification，contains general information and definitions on the test method to evaluate the immunity
Integrated circuits - Measurement of impulse immunity - Part 2: Synchronous transient injection method
GB/T 40309-2021 电动平衡车 电磁兼容 发射和抗扰度要求
Electrical self-balancing vehicle—Electromagnetic compatibility—Emission and immunity requirements
BS EN 62215-3:2013 集成电路.脉冲抗干扰度测量.第3部分:非同步瞬时注射法
Integrated circuits. Measurement of impulse immunity. Non-synchronous transient injection method
编辑：北检院编辑部
