发动机舱及底部部件的有机涂层检测

GMW 14671-2011 发动机舱和车身底座部件的有机涂层性能.第3次出版(英文版本)

Organic Coating Performance for Underhood and Underbody Components Issue 3; English

GB/T 14616-2008 机舱舱底涂料通用技术条件

本标准规定了机舱舱底涂料（以下简称涂料）的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于钢船主机、辅机及泵舱舱底的涂料体系

General specification for engine-room bottom coating

GB/T 14616-1993 机舱舱底涂料通用技术条件

本标准规定了机舱舱底涂料的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于钢船主机、辅机及泵舱舱底的涂料系统

General specification for engine-room bottom coating

ASTM F1428-92(2005 紧固件用非有机顶涂层,防腐蚀涂层的铝颗粒填充底涂层/有机物

1.1 This specification covers the basic requirements for a corrosion-resistant coating consisting of an inorganic aluminum particle-filled basecoat

Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

ASTM F1428-92(2011 紧固件的充铝粒子底涂层/有机或机外涂层, 防腐蚀涂层的标准规范

1.1 This specification covers the basic requirements for a corrosion-resistant coating consisting of an inorganic aluminum

Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

ASTM F2833-11 使用富锌底涂层和有机/机铝防腐涂层的紧固件的标准规范

1.1 This specification covers the basic requirements for chromium-free fastener coatings that combine an inorganic zinc-rich basecoat

Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

0 金属紧固件涂层.第10部分:有机涂层规范

This Part of BS 7371 specifies requirements for organic coatings. The coatings consist principally of pigments and other additives bonded by resins

FORD ESR-M14P3-A-1978 发动机外部和发动机舱修理用清洁剂

CLEANER, RECONDITIONING - ENGINE EXTERIOR AND ENGINE COMPARTMENT

AIR FORCE MIL-PRF-3043 C-1998 用于发动机零件及金属零件的永久性树脂涂层

This specification covers one type of permanent resin coating for surfaces of engine components and metal parts

RESIN COATING, PERMANENT, FOR ENGINE COMPONENTS AND METAL PARTS

CSN 03 8762-1989 热喷金属及有机涂层联合涂层

Zpracovatel a oborové normaliza?ní st?edisko: Státní v?zkumn? ústav ochrany materiálu G. V. Akimova, Praha, I?O 002364 — Bernard Knápek, Jaromír

Combined coatings of thermal spray-ed metals and organic coatings

ISO 18768-1:2022 铝及其合金上的有机涂层.铝上装饰性和保护性有机涂层的规定方法.第1部分:粉末涂层

Organic coatings on aluminium and its alloys — Methods for specifying decorative and protective organic coatings on aluminium — Part 1: Powder coatings

ISO 18768-2:2022 铝及其合金上的有机涂层.铝上装饰性和保护性有机涂层的规定方法.第2部分:液体涂层

Organic coatings on aluminium and its alloys — Methods for specifying decorative and protective organic coatings on aluminium — Part 2: Liquid coatings

FORD ESB-M32J121-A1-1986 车外级底涂层/透明涂层湿碰湿工艺用中等挥发性有机化合物含量的改性聚酯底涂瓷漆

ENAMEL, INTERMEDIATE V.O.C., MODIFIED POLYESTER BASECOAT FOR BASECOAT/CLEARCOAT WET ON WET PROCESS, EXTERIOR QUALITY

DIN 25603-2:2001 有轨机动车部件术语.底盘.第2部分:货车底盘

The document applies to coach underframes and defines the corresponding terms

Terms for railway vehicle parts - Underframe - Part 2: Coach underframe

EN 10245-4:2003 钢丝及其制品.钢丝上的有机涂层.第4部分:聚酯涂层丝

Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire

GMW 14671-2011 发动机舱和车身底座部件的有机涂层性能.第3次出版(英文版本)

Organic Coating Performance for Underhood and Underbody Components Issue 3; English

GB/T 14616-2008 机舱舱底涂料通用技术条件

本标准规定了机舱舱底涂料（以下简称涂料）的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于钢船主机、辅机及泵舱舱底的涂料体系

General specification for engine-room bottom coating

GB/T 14616-1993 机舱舱底涂料通用技术条件

本标准规定了机舱舱底涂料的技术要求、试验方法、检验规则、标志、包装、运输和贮存等。 本标准适用于钢船主机、辅机及泵舱舱底的涂料系统

General specification for engine-room bottom coating

ASTM F1428-92(2005 紧固件用非有机顶涂层,防腐蚀涂层的铝颗粒填充底涂层/有机物

1.1 This specification covers the basic requirements for a corrosion-resistant coating consisting of an inorganic aluminum particle-filled basecoat

Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

ASTM F1428-92(2011 紧固件的充铝粒子底涂层/有机或机外涂层, 防腐蚀涂层的标准规范

1.1 This specification covers the basic requirements for a corrosion-resistant coating consisting of an inorganic aluminum

Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

ASTM F2833-11 使用富锌底涂层和有机/机铝防腐涂层的紧固件的标准规范

1.1 This specification covers the basic requirements for chromium-free fastener coatings that combine an inorganic zinc-rich basecoat

Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

0 金属紧固件涂层.第10部分:有机涂层规范

This Part of BS 7371 specifies requirements for organic coatings. The coatings consist principally of pigments and other additives bonded by resins

FORD ESR-M14P3-A-1978 发动机外部和发动机舱修理用清洁剂

CLEANER, RECONDITIONING - ENGINE EXTERIOR AND ENGINE COMPARTMENT

AIR FORCE MIL-PRF-3043 C-1998 用于发动机零件及金属零件的永久性树脂涂层

This specification covers one type of permanent resin coating for surfaces of engine components and metal parts

RESIN COATING, PERMANENT, FOR ENGINE COMPONENTS AND METAL PARTS

CSN 03 8762-1989 热喷金属及有机涂层联合涂层

Zpracovatel a oborové normaliza?ní st?edisko: Státní v?zkumn? ústav ochrany materiálu G. V. Akimova, Praha, I?O 002364 — Bernard Knápek, Jaromír

Combined coatings of thermal spray-ed metals and organic coatings

ISO 18768-1:2022 铝及其合金上的有机涂层.铝上装饰性和保护性有机涂层的规定方法.第1部分:粉末涂层

Organic coatings on aluminium and its alloys — Methods for specifying decorative and protective organic coatings on aluminium — Part 1: Powder coatings

ISO 18768-2:2022 铝及其合金上的有机涂层.铝上装饰性和保护性有机涂层的规定方法.第2部分:液体涂层

Organic coatings on aluminium and its alloys — Methods for specifying decorative and protective organic coatings on aluminium — Part 2: Liquid coatings

FORD ESB-M32J121-A1-1986 车外级底涂层/透明涂层湿碰湿工艺用中等挥发性有机化合物含量的改性聚酯底涂瓷漆

ENAMEL, INTERMEDIATE V.O.C., MODIFIED POLYESTER BASECOAT FOR BASECOAT/CLEARCOAT WET ON WET PROCESS, EXTERIOR QUALITY

DIN 25603-2:2001 有轨机动车部件术语.底盘.第2部分:货车底盘

The document applies to coach underframes and defines the corresponding terms

Terms for railway vehicle parts - Underframe - Part 2: Coach underframe

EN 10245-4:2003 钢丝及其制品.钢丝上的有机涂层.第4部分:聚酯涂层丝

Steel wire and wire products - Organic coatings on steel wire - Part 4: Polyester coated wire