铜导体的保护导体接线端子排检测

GB 14048.8-1998 低压开关设备和控制设备辅助电器 第2部分: 铜导体的保护导体接线端子排

本标准规定了主要用于工业用的带螺纹型或非螺纹型夹紧件的保护导体接线端子排，具有PE保护功能的接线端子排不大于120mm²（250MCM），具有PEN保护功能的接线端子排大于或等于10mm²（AWG8）。 保护导体接线端子排用于铜导体和安装支架之间的电气和机械连接

Low-voltage switchgear and controlgear. Ancillary equipment. Section 2: Protective conductor terminal blocks for copper conductors

GB/T 14048.8-2016 低压开关设备和控制设备 第7-2部分:辅助器件 铜导体的保护导体接线端子排

GB 14048的本部分规定了主要用于工业的螺纹型或非螺纹型夹紧件的保护导体接线端子排的要求，具有PE保护功能的接线端子排不大于120 mm² (250 kcmil)，具有PEN保护功能的接线端子排大于或等于10 mm² (AWG 8)。 保护导体接线端子排用于铜导体和安装支架之间

Low-voltage switchgear and controlgear.Part 7-2:Ancillary equipment.Protective conductor terminal blocks for copper conductors

GB/T 14048.8-2006 低压开关没备和控制设备 第7-2部分:辅助器件 铜导体的保护导体接线端子排

本部分规定了主要用于工业的螺纹型或非螺纹型夹紧件的保护导体接线端子排的要求，具有PE保护功能的接线端子排不大于120mm²（250kcmil），具有PEN保护功能的接线端子排大于或等于10mm²（AWG 8）。 保护导体接线端子排用于铜导体和安装支架之间的电气和

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment Protective conductor terminal blocks for copper conductors

ANSI/UL 60947-7-2-2011 低压开关设备和控制设备.第7-2部分:辅助设备.铜导体的保护导体接线端子排

The following changes in requirements are being proposed: 1. Proposed Third Edition of the Standard for Low-Voltage Switchgear and Controlgear - Part

Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors

ANSI/UL 60947-7-2-2017 低压开关设备和控制设备安全标准. 第7-2部分: 辅助设备. 铜导体的保护导体接线端子排

UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors (Fourth Edition)

UL 60947-7-2 (ND)-2011 UL 60947-7-2低压开关设备和控制设备的国家差异. 第7-2部分: 辅助设备. 铜导体的保护导体接线端子排

National Differences For UL 60947-7-2 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors (Third Edition; Reprint with Revisions Through and Including October 14, 2011)

KS C 2620-2011(2016 用于铜导体的压接式接线端子

Crimp-type terminal lugs for copper conductors

GB/T 14048.22-2022 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排

Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors

SAE AS7928/13-2009 压接式接线片与铰接处的导体接线端子,绝缘锡晶须保护舌环形钟口状II型1类接线片铜接线端子(用于总导体温度150℃)

Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Tin Whisker Resistant, Ring, Tongue, Bell-Mouthed, Type II, Class 1 (for 150°C Total Conductor Temperature)

SANS 60947-7-2:2009 低压开关设备及控制设备.第7-2部分:辅助设备.铜导体的保护性导体接线端子

Specifies requirements for protective conductor terminal blocks with PE function up to 120 mm?(250 kcmil) and for protective conductor terminal blocks

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

IEC 60947-7-2-2009 低压开关柜和控制装置 - 第7-2部分:辅助设备 - 用于铜导体的保护导体接线端子

Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

GOST IEC 60947-7-2-2016 低压开关设备和控制设备. 第7-2部分. 辅助设备. 铜导体用保护导体接线端子

Low-voltage switchgear and controlgear. Part 7-2. Ancillary equipment. Protective conductor terminal blocks for copper conductors

SAE AS7928/7A-2014 175℃总导体温度用I型,1级,环形舌片,非绝缘,铜,压接,终端接线,铜,压接,导体接线端子

Scope is unavailable

TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE

SAE AS7928/7-1999 175℃总导体温度用I型,1级,环形舌片,非绝缘,铜,压接,终端接线,铜,压接,导体接线端子

Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees

Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 3

GB/T 14048.22-2017 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排

Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors

GB 14048.8-1998 低压开关设备和控制设备辅助电器 第2部分: 铜导体的保护导体接线端子排

本标准规定了主要用于工业用的带螺纹型或非螺纹型夹紧件的保护导体接线端子排，具有PE保护功能的接线端子排不大于120mm²（250MCM），具有PEN保护功能的接线端子排大于或等于10mm²（AWG8）。 保护导体接线端子排用于铜导体和安装支架之间的电气和机械连接

Low-voltage switchgear and controlgear. Ancillary equipment. Section 2: Protective conductor terminal blocks for copper conductors

GB/T 14048.8-2016 低压开关设备和控制设备 第7-2部分:辅助器件 铜导体的保护导体接线端子排

GB 14048的本部分规定了主要用于工业的螺纹型或非螺纹型夹紧件的保护导体接线端子排的要求，具有PE保护功能的接线端子排不大于120 mm² (250 kcmil)，具有PEN保护功能的接线端子排大于或等于10 mm² (AWG 8)。 保护导体接线端子排用于铜导体和安装支架之间

Low-voltage switchgear and controlgear.Part 7-2:Ancillary equipment.Protective conductor terminal blocks for copper conductors

GB/T 14048.8-2006 低压开关没备和控制设备 第7-2部分:辅助器件 铜导体的保护导体接线端子排

本部分规定了主要用于工业的螺纹型或非螺纹型夹紧件的保护导体接线端子排的要求，具有PE保护功能的接线端子排不大于120mm²（250kcmil），具有PEN保护功能的接线端子排大于或等于10mm²（AWG 8）。 保护导体接线端子排用于铜导体和安装支架之间的电气和

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment Protective conductor terminal blocks for copper conductors

ANSI/UL 60947-7-2-2011 低压开关设备和控制设备.第7-2部分:辅助设备.铜导体的保护导体接线端子排

The following changes in requirements are being proposed: 1. Proposed Third Edition of the Standard for Low-Voltage Switchgear and Controlgear - Part

Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors

ANSI/UL 60947-7-2-2017 低压开关设备和控制设备安全标准. 第7-2部分: 辅助设备. 铜导体的保护导体接线端子排

UL Standard for Safety Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors (Fourth Edition)

UL 60947-7-2 (ND)-2011 UL 60947-7-2低压开关设备和控制设备的国家差异. 第7-2部分: 辅助设备. 铜导体的保护导体接线端子排

National Differences For UL 60947-7-2 Low-Voltage Switchgear and Controlgear - Part 7-2: Ancillary Equipment - Protective Conductor Terminal Blocks for Copper Conductors (Third Edition; Reprint with Revisions Through and Including October 14, 2011)

KS C 2620-2011(2016 用于铜导体的压接式接线端子

Crimp-type terminal lugs for copper conductors

GB/T 14048.22-2022 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排

Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors

SAE AS7928/13-2009 压接式接线片与铰接处的导体接线端子,绝缘锡晶须保护舌环形钟口状II型1类接线片铜接线端子(用于总导体温度150℃)

Terminals, Lug and Splices, Conductor, Crimp Style, Copper Terminal, Lug, Insulated, Tin Whisker Resistant, Ring, Tongue, Bell-Mouthed, Type II, Class 1 (for 150°C Total Conductor Temperature)

SANS 60947-7-2:2009 低压开关设备及控制设备.第7-2部分:辅助设备.铜导体的保护性导体接线端子

Specifies requirements for protective conductor terminal blocks with PE function up to 120 mm?(250 kcmil) and for protective conductor terminal blocks

Low-voltage switchgear and controlgear Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

IEC 60947-7-2-2009 低压开关柜和控制装置 - 第7-2部分:辅助设备 - 用于铜导体的保护导体接线端子

Low-voltage switchgear and controlgear - Part 7-2: Ancillary equipment - Protective conductor terminal blocks for copper conductors

GOST IEC 60947-7-2-2016 低压开关设备和控制设备. 第7-2部分. 辅助设备. 铜导体用保护导体接线端子

Low-voltage switchgear and controlgear. Part 7-2. Ancillary equipment. Protective conductor terminal blocks for copper conductors

SAE AS7928/7A-2014 175℃总导体温度用I型,1级,环形舌片,非绝缘,铜,压接,终端接线,铜,压接,导体接线端子

Scope is unavailable

TERMINAL LUG AND SPLICES, CONDUCTOR, CRIMP STYLE, COPPER, TERMINAL LUG, CRIMP STYLE, COPPER, UNINSULATED, RING TONGUE TYPE I, CLASS 1 FOR 175 °C TOTAL CONDUCTOR TEMPERATURE

SAE AS7928/7-1999 175℃总导体温度用I型,1级,环形舌片,非绝缘,铜,压接,终端接线,铜,压接,导体接线端子

Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees

Terminal Lug and Splices, Conductor, Crimp Style, Copper, Terminal Lug, Crimp Style, Copper, Uninsulated, Ring Tongue Type I, Class 1 for 175 Degrees C Total Conductor Temperature FSC 5940; Should Be Used Instead of MIL-T-7928/7, Which Was Cancelled on 3

GB/T 14048.22-2017 低压开关设备和控制设备 第7-4部分：辅助器件 铜导体的PCB接线端子排

Low-voltage switchgear and controlgear—Part 7-4: Ancillary equipment—PCB terminal blocks for copper conductors