螺纹型和非螺纹型夹紧件检测

GB/T 20636-2006 连接器件 电气铜导线 螺纹型和非螺纹型 夹紧件的安全要求 适用于35mm²以上至300mm²导线的特殊要求

本标准适用于独立单元或作为设备的整体式部件的螺纹型和非螺纹形夹紧件。夹紧件用于连接截面积为35mm²以上至300mm²(或相当的AWG/kcmil线规尺寸)的绞合硬和/或软电气铜导线(符合GB/T 3956规定),其额定交流电压不大于1000V，频率不大于1000Hz和额定直流电压

Connecting device-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units Particular requirements for conductors above 35mm up to 300mm

GB 17464-1998 连接器件 连接铜导线用的螺纹型和螺纹型夹紧件的安全要求

本标准适用于作为独立单元或作为设备的整体式部年的螺纹型和螺纹型夹紧件，其额定交流电压不超过1000V、频率不大于1000Hz和额定直流电压不超过1500V。用于连接（符合IEC288要求的）横截面积0.5mm²～15mm²（或相庆AWG线规尺寸）硬（单芯或绞合）和/或软的铜

Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors

T/ZZB 0954-2019 螺纹夹紧型接线端子架

本标准规定了螺纹夹紧型接线端子架的术语和定义、基本要求、产品分类、技术要求、试验方法、标志、包装、运输及贮存和质量承诺。 本标准适用于内宽为4 mm～6 mm、内高为4.5 mm～8 mm，以及壁厚为0.8 mm和1 mm的螺纹夹紧型接线

Thread clamping terminal

CSN 25 4342-1961 非穿过型边螺纹插塞的测量部件．两侧夹角为80°的V型螺纹

Screw gauges. Measuring parts for "not go" side of thread plug gauges. V-thread (angle between flanks=80 grads)

NEN 10999-1993 IEC 999-1990 连接器件．连接铜导线用的螺纹型和螺纹型夹紧件的安全要求

Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors (IEC 999: 1990, modified)

SANS 1700-2-8:2009 紧固件．第2部分：螺纹．第8节：ISO微型车螺纹

Specifies the theoretical profile associated with the basic sizes of the major, pitch and minor diameters of the thread; the deviations are applied

Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads

KS B 0245-1987(2022 外螺纹紧固件的螺纹跳动和螺纹咬边

Thread Run-Outs and Thread Undercuts for External Threaded Fasteners

JIS B 1006:1985 外螺纹紧固件用退刀螺纹和螺纹根切

この規格は，一般に用いるおねじ部品のねじ部に適用する不完全ねじ部の長さ及びねじの逃げ溝の形状?寸法について規定する

Thread run-outs and thread undercuts for external threaded fasteners

STAS 1450/5-1989 螺纹紧固件．垫圈和夹板．命名

Prezentul standard stabile?te nomenclatorul ?aibelor ?i ?plinturilor de uz general

Threaded fasteners washers and splints nomenclature

SANS 1700-2-8:1996 紧固件.第2部分:螺纹.第8子部分:ISO微型螺纹

Specifies ISO miniature screw threads with thread sizes from 0,3 mm to 1,4 mm

Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads

GB 17464-2012 连接器件.电气铜导线.螺纹型和螺纹型夹紧件的安全要求.适用于0.2 mm²以上至35 mm²（包括）导线的夹紧件的通用要求和特殊要求

本标准规定了适用于0.2mm²以上至35mm²导线的夹紧件的主要特性、导线的连接、结构要求、试验方法的技术要求。 本标准适用于作为独立单元或与设备成一整体的部件的螺纹型和螺纹型夹紧件,其额定交流电压不超过1000V、频率不大于1000Hz和额定直流电压不超过1500V,用于连接符合GB/T

Connecting devices.Electrical copper conductors.Safety requirements for screw-type and screwless-type clamping units.General requirements and particular requirements for clamping units for conductors from 0.2mm² up to 35mm²（included）

NAVY QPL-18240-QPD-2012 最大250 ℉螺纹紧固件自锁型紧固元件

Fastener Element, Self-Locking, Threaded Fastener, 250 Deg. F Maximum

NAVY QPL-18240-2012 最大250 ℉螺纹紧固件自锁型紧固元件

Fastener Element, Self-Locking, Threaded Fastener, 250 Degrees F Maximum

CSN 25 4345-1961 穿过型边极限螺纹环．两侧夹角为80°的螺纹

Screw gauges. Limit thread rings "go" side. V-thread (angle between flanks=80 grads)

CSN 25 4341-1961 穿过型边螺纹规测量部件．两侧夹角为80°的V行螺纹

Screw gauges. Measuring parts for "go" side of thread plug gauges. V-thread (angle between flanks 80 grads)

GB/T 20636-2006 连接器件 电气铜导线 螺纹型和非螺纹型 夹紧件的安全要求 适用于35mm²以上至300mm²导线的特殊要求

本标准适用于独立单元或作为设备的整体式部件的螺纹型和非螺纹形夹紧件。夹紧件用于连接截面积为35mm²以上至300mm²(或相当的AWG/kcmil线规尺寸)的绞合硬和/或软电气铜导线(符合GB/T 3956规定),其额定交流电压不大于1000V，频率不大于1000Hz和额定直流电压

Connecting device-Electrical copper conductors-Safety requirements for screw-type and screwless-type clamping units Particular requirements for conductors above 35mm up to 300mm

GB 17464-1998 连接器件 连接铜导线用的螺纹型和螺纹型夹紧件的安全要求

本标准适用于作为独立单元或作为设备的整体式部年的螺纹型和螺纹型夹紧件，其额定交流电压不超过1000V、频率不大于1000Hz和额定直流电压不超过1500V。用于连接（符合IEC288要求的）横截面积0.5mm²～15mm²（或相庆AWG线规尺寸）硬（单芯或绞合）和/或软的铜

Connecting devices--Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors

T/ZZB 0954-2019 螺纹夹紧型接线端子架

本标准规定了螺纹夹紧型接线端子架的术语和定义、基本要求、产品分类、技术要求、试验方法、标志、包装、运输及贮存和质量承诺。 本标准适用于内宽为4 mm～6 mm、内高为4.5 mm～8 mm，以及壁厚为0.8 mm和1 mm的螺纹夹紧型接线

Thread clamping terminal

CSN 25 4342-1961 非穿过型边螺纹插塞的测量部件．两侧夹角为80°的V型螺纹

Screw gauges. Measuring parts for "not go" side of thread plug gauges. V-thread (angle between flanks=80 grads)

NEN 10999-1993 IEC 999-1990 连接器件．连接铜导线用的螺纹型和螺纹型夹紧件的安全要求

Connecting devices. Safety requirements for screw-type and screwless-type clamping units for electrical copper conductors (IEC 999: 1990, modified)

SANS 1700-2-8:2009 紧固件．第2部分：螺纹．第8节：ISO微型车螺纹

Specifies the theoretical profile associated with the basic sizes of the major, pitch and minor diameters of the thread; the deviations are applied

Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads

KS B 0245-1987(2022 外螺纹紧固件的螺纹跳动和螺纹咬边

Thread Run-Outs and Thread Undercuts for External Threaded Fasteners

JIS B 1006:1985 外螺纹紧固件用退刀螺纹和螺纹根切

この規格は，一般に用いるおねじ部品のねじ部に適用する不完全ねじ部の長さ及びねじの逃げ溝の形状?寸法について規定する

Thread run-outs and thread undercuts for external threaded fasteners

STAS 1450/5-1989 螺纹紧固件．垫圈和夹板．命名

Prezentul standard stabile?te nomenclatorul ?aibelor ?i ?plinturilor de uz general

Threaded fasteners washers and splints nomenclature

SANS 1700-2-8:1996 紧固件.第2部分:螺纹.第8子部分:ISO微型螺纹

Specifies ISO miniature screw threads with thread sizes from 0,3 mm to 1,4 mm

Fasteners Part 2: Screw threads Section 8: ISO miniature screw threads

GB 17464-2012 连接器件.电气铜导线.螺纹型和螺纹型夹紧件的安全要求.适用于0.2 mm²以上至35 mm²（包括）导线的夹紧件的通用要求和特殊要求

本标准规定了适用于0.2mm²以上至35mm²导线的夹紧件的主要特性、导线的连接、结构要求、试验方法的技术要求。 本标准适用于作为独立单元或与设备成一整体的部件的螺纹型和螺纹型夹紧件,其额定交流电压不超过1000V、频率不大于1000Hz和额定直流电压不超过1500V,用于连接符合GB/T

Connecting devices.Electrical copper conductors.Safety requirements for screw-type and screwless-type clamping units.General requirements and particular requirements for clamping units for conductors from 0.2mm² up to 35mm²（included）

NAVY QPL-18240-QPD-2012 最大250 ℉螺纹紧固件自锁型紧固元件

Fastener Element, Self-Locking, Threaded Fastener, 250 Deg. F Maximum

NAVY QPL-18240-2012 最大250 ℉螺纹紧固件自锁型紧固元件

Fastener Element, Self-Locking, Threaded Fastener, 250 Degrees F Maximum

CSN 25 4345-1961 穿过型边极限螺纹环．两侧夹角为80°的螺纹

Screw gauges. Limit thread rings "go" side. V-thread (angle between flanks=80 grads)

CSN 25 4341-1961 穿过型边螺纹规测量部件．两侧夹角为80°的V行螺纹

Screw gauges. Measuring parts for "go" side of thread plug gauges. V-thread (angle between flanks 80 grads)