增强制品/机织物检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

ISO 5025:2017 增强制品.机织物.宽度和长度的测定

Reinforcement products - Woven fabrics - Determination of width and length

0 增强制品 机织物 宽度和长度的测定

This International Standard specifies a method for determining the width and length of a woven-fabric reinforcement in the form of a roll. note

prEN 24671-1992 橡胶制品.织物增强吸水软管

Rubber products; textiles-reinforced hoses for water suction (ISO 4671:1984)

BS ISO 5025:1998 增强产品.机织物.宽度和长度测定

This International Standard specifies a method for determining the width and length of a woven-fabric reinforcement in the form of a roll

Reinforcement products - Woven fabrics - Determination of width and length

BS ISO 2113:1996 增强纤维.机织织物.规范基础

This International Standard provides a basis for a specification applicable to fabrics woven from yarns (including single yarns, multiple-wound yarns

Reinforcement fibres - Woven fabrics - Basis for a specification

NF T25-010*NF ISO 2113:1997 增强纤维 机织织物 规范基础

Reinforcement fibres - Woven fabrics - Basis for a specification

0 增强纤维产品.机织织物.幅宽和长度的测定

ISO 3374:2000 增强制品 毡和织物 单位面积质量的测定

This International Standard specifies a method for determining the mass per unit area of mats (either chopped-strand mat or continuous-strand mat

Reinforcement products - Mats and fabrics - Determination of mass per unit area

KS L ISO 3374:2003 增强制品.毡和织物.单位面积质量的测定

이 규격은 유리나 카본 또는 아라미드실을 갖고 제조하는 매트(절단 또는 연속 섬유 매트

Reinforcement products-Mat and fabics-Determination of mass per unit area

ISO 2113:1996 增强纤维 机织物 基本规范

Provides a basis for a specification applicable to fabrics woven from yarn made from textile glass, carbon or aramid and generally used for plastics

Reinforcement fibres - Woven fabrics - Basis for a specification

BS ISO 3374:2000 增强制品.毯子和织物.单位面积质量的测定

This International Standard specifies a method for determining the mass per unit area of mats (either chopped-strand mat or continuous-strand mat

Reinforcement products - Mats and fabrics - Determination of mass per unit area

NF T25-204-1*NF EN 13417-1:2002 增强纤维 机织织物规范 第1部分:标识

Reinforcement - Specifications for woven fabrics - Part 1 : designation

GB/T 7689.3-2001 增强材料 机织物试验方法 第3部分;宽度和长度的测定

本标准规定了玻璃纤维、碳纤维、芳纶和其他增强纤维制成的机织物厚度和长度的测定方法。 本标准适用于卷状的增强制品机织物

Reinforcements--Test method for woven fabrics Part 3: Determination of width and length

GB/T 7689.3-2013 增强材料 机织物试验方法 第3部分:宽度和长度的测定

本部分规定了增强纤维制成的机织物宽度和长度的测定方法。本方法适用于以卷状形式提供的增强纤维机织物

Reinforcements.Test method for woven fabrics.Part 3:Determination of width and length

BS 3396-2:1987 塑料增强用机织玻璃纤维织物.第2部分:退浆织物规范

Requirements for residual size content, breaking strength and packaging of desized fabrics, originally complying in the 'loom-state' with Part 1

Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics

ISO 5025:2017 增强制品.机织物.宽度和长度的测定

Reinforcement products - Woven fabrics - Determination of width and length

0 增强制品 机织物 宽度和长度的测定

This International Standard specifies a method for determining the width and length of a woven-fabric reinforcement in the form of a roll. note

prEN 24671-1992 橡胶制品.织物增强吸水软管

Rubber products; textiles-reinforced hoses for water suction (ISO 4671:1984)

BS ISO 5025:1998 增强产品.机织物.宽度和长度测定

This International Standard specifies a method for determining the width and length of a woven-fabric reinforcement in the form of a roll

Reinforcement products - Woven fabrics - Determination of width and length

BS ISO 2113:1996 增强纤维.机织织物.规范基础

This International Standard provides a basis for a specification applicable to fabrics woven from yarns (including single yarns, multiple-wound yarns

Reinforcement fibres - Woven fabrics - Basis for a specification

NF T25-010*NF ISO 2113:1997 增强纤维 机织织物 规范基础

Reinforcement fibres - Woven fabrics - Basis for a specification

0 增强纤维产品.机织织物.幅宽和长度的测定

ISO 3374:2000 增强制品 毡和织物 单位面积质量的测定

This International Standard specifies a method for determining the mass per unit area of mats (either chopped-strand mat or continuous-strand mat

Reinforcement products - Mats and fabrics - Determination of mass per unit area

KS L ISO 3374:2003 增强制品.毡和织物.单位面积质量的测定

이 규격은 유리나 카본 또는 아라미드실을 갖고 제조하는 매트(절단 또는 연속 섬유 매트

Reinforcement products-Mat and fabics-Determination of mass per unit area

ISO 2113:1996 增强纤维 机织物 基本规范

Provides a basis for a specification applicable to fabrics woven from yarn made from textile glass, carbon or aramid and generally used for plastics

Reinforcement fibres - Woven fabrics - Basis for a specification

BS ISO 3374:2000 增强制品.毯子和织物.单位面积质量的测定

This International Standard specifies a method for determining the mass per unit area of mats (either chopped-strand mat or continuous-strand mat

Reinforcement products - Mats and fabrics - Determination of mass per unit area

NF T25-204-1*NF EN 13417-1:2002 增强纤维 机织织物规范 第1部分:标识

Reinforcement - Specifications for woven fabrics - Part 1 : designation

GB/T 7689.3-2001 增强材料 机织物试验方法 第3部分;宽度和长度的测定

本标准规定了玻璃纤维、碳纤维、芳纶和其他增强纤维制成的机织物厚度和长度的测定方法。 本标准适用于卷状的增强制品机织物

Reinforcements--Test method for woven fabrics Part 3: Determination of width and length

GB/T 7689.3-2013 增强材料 机织物试验方法 第3部分:宽度和长度的测定

本部分规定了增强纤维制成的机织物宽度和长度的测定方法。本方法适用于以卷状形式提供的增强纤维机织物

Reinforcements.Test method for woven fabrics.Part 3:Determination of width and length

BS 3396-2:1987 塑料增强用机织玻璃纤维织物.第2部分:退浆织物规范

Requirements for residual size content, breaking strength and packaging of desized fabrics, originally complying in the 'loom-state' with Part 1

Woven glass fibre fabrics for plastics reinforcement - Specification for desized fabrics

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

⏱

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

➔
02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

➔
03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

➔
04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

➔
05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通