服务热线:400-635-0567

化学品(固体)检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

SN/T 3732-2013 与液鉴别方法

本标准规定了化学品固体与液体的一种鉴别方法,以便于选择相应的方法和标准对化学品进行危险性分类。本标准适用于黏性化学品危险性分类过程中固体与液体形态的鉴别

Chemicals.Determination of the state:liquid or solid

GB/T 21849-2008 工业用.和液水解产生的气可燃性的确定

当样品与蒸馏水反应后会释放有危险气体或有疑似易燃或有毒气体时,可以使用本标准方法。 本标准适用于确定固体或液体化学品水解后产生气体的可燃性。 本标准不适用于那些与空气接触后会自动燃烧的物质

Chemical products for industrial use.Determination of inflammation of gases formed after hydrolysis of solids ans liquids

NF T20-035:1985 工业用.性能的测定

Chemical products for industrial use. Determination of oxidizing properties of solids.

NF T20-042:1985 工业用.着火点的测定

Chemical products for industrial use. Determination of inflammation of solids.

GB/T 22229-2008 工业用.及液的蒸气压在10-3Pa至1Pa范围内的测定.蒸气压平衡法

本标准规定一种通过测定质量变化来判定工业用化学品的蒸气压的方法。 它适用于固体、液体在蒸气压为10-3Pa~1 Pa的范围内。 测量时杂质对化学品性质有一定的影响,例如溶剂的挥发性

Chemical products for industrial use.Determinaton of vapour pressure of solids and liquids at range 10to 1 Pa.Vapour pressure balance method

GB/T 21755-2008 工业用途的.物质氧性质的测定

本标准规定了固体化学产品氧化性质的一种测定方法。 本标准不适用于液体产品、气体、爆炸或易燃产品、有机过氧化物以及在本方法实验条件下熔化的固体产品(例如表面活性剂等

Chemical products for industrial use.Determination of oxidizing properties of solids

GB/T 22228-2008 工业用.及液的蒸气压在10-1Pa至105Pa 范围内的测定.静态法

本标准主要采用静态法测定工业用化学品的蒸气压。 本标准适用于蒸气压值在10-1Pa~105Pa范围内的所有固体和液体。 测量时杂质对化学品性质有一定的影响,例如溶剂的挥发性

Chemical products for industrial use.Determination of vapour pressure of solids and liquids in the rang 10to 10Pa.Static method

NF T20-039:1985 工业用.和液着火点的测定

Chemical products for industrial use. Determination of spontaneous inflammation of solids and liquids.

GOST 33096-2014 家用. 表面除锈率的测定方法

Goods of household chemistry. Method for determination of efficiency of rust removal from solid surface

NF T20-036:1985 工业用.自发着火点相对温度的测定

Chemical product for industrial use. Determination of relative temperature of spontaneous flammable of solids.

GB/T 21756-2008 工业用途的.物质相对自燃温度的测定

本标准规定了固体化学产品自然性质的一种方法。 本标准不适用于易爆产品和在常温下和空气发生自然的产品,以及在本方法实验条件下熔化的固体产品(例如表面活性剂等

Chemical products for industrial use.Determination of relative temperature of spontaneous flammable of solids

NF T20-040:1985 工业用.和液水解后形成气的着火点测定

Chemical products for industrial use. Determination of inflammation of gases formed after hydrolysis of solids and liquids.

GOST R 54517-2011 取决于物理和性质的危险分类.状态可燃的试验方法

Classification of chemicals hazardous due to their physical and chemical properties. Test methods of flammable chemicals in solid state

GOST R 54517-2011(2019 取决于物理和性质的危险分类.状态可燃的试验方法

Classification of chemicals hazardous due to their physical and chemical properties. Test methods of flammable chemicals in solid state

GB/T 31857-2015 废弃分类规范

本标准规定了废弃固体化学品的分类和要求。 本标准适用于指导废弃固体化学品的产生者和专业废弃固体化学品处理机构对可再利用的废弃固体化学品进行分类、收集、日常管理等。 本标准不适用于实验室、医疗、放射性废弃固体化学品

Classification of solid chemical waste

SN/T 3732-2013 与液鉴别方法

本标准规定了化学品固体与液体的一种鉴别方法,以便于选择相应的方法和标准对化学品进行危险性分类。本标准适用于黏性化学品危险性分类过程中固体与液体形态的鉴别

Chemicals.Determination of the state:liquid or solid

GB/T 21849-2008 工业用.和液水解产生的气可燃性的确定

当样品与蒸馏水反应后会释放有危险气体或有疑似易燃或有毒气体时,可以使用本标准方法。 本标准适用于确定固体或液体化学品水解后产生气体的可燃性。 本标准不适用于那些与空气接触后会自动燃烧的物质

Chemical products for industrial use.Determination of inflammation of gases formed after hydrolysis of solids ans liquids

NF T20-035:1985 工业用.性能的测定

Chemical products for industrial use. Determination of oxidizing properties of solids.

NF T20-042:1985 工业用.着火点的测定

Chemical products for industrial use. Determination of inflammation of solids.

GB/T 22229-2008 工业用.及液的蒸气压在10-3Pa至1Pa范围内的测定.蒸气压平衡法

本标准规定一种通过测定质量变化来判定工业用化学品的蒸气压的方法。 它适用于固体、液体在蒸气压为10-3Pa~1 Pa的范围内。 测量时杂质对化学品性质有一定的影响,例如溶剂的挥发性

Chemical products for industrial use.Determinaton of vapour pressure of solids and liquids at range 10to 1 Pa.Vapour pressure balance method

GB/T 21755-2008 工业用途的.物质氧性质的测定

本标准规定了固体化学产品氧化性质的一种测定方法。 本标准不适用于液体产品、气体、爆炸或易燃产品、有机过氧化物以及在本方法实验条件下熔化的固体产品(例如表面活性剂等

Chemical products for industrial use.Determination of oxidizing properties of solids

GB/T 22228-2008 工业用.及液的蒸气压在10-1Pa至105Pa 范围内的测定.静态法

本标准主要采用静态法测定工业用化学品的蒸气压。 本标准适用于蒸气压值在10-1Pa~105Pa范围内的所有固体和液体。 测量时杂质对化学品性质有一定的影响,例如溶剂的挥发性

Chemical products for industrial use.Determination of vapour pressure of solids and liquids in the rang 10to 10Pa.Static method

NF T20-039:1985 工业用.和液着火点的测定

Chemical products for industrial use. Determination of spontaneous inflammation of solids and liquids.

GOST 33096-2014 家用. 表面除锈率的测定方法

Goods of household chemistry. Method for determination of efficiency of rust removal from solid surface

NF T20-036:1985 工业用.自发着火点相对温度的测定

Chemical product for industrial use. Determination of relative temperature of spontaneous flammable of solids.

GB/T 21756-2008 工业用途的.物质相对自燃温度的测定

本标准规定了固体化学产品自然性质的一种方法。 本标准不适用于易爆产品和在常温下和空气发生自然的产品,以及在本方法实验条件下熔化的固体产品(例如表面活性剂等

Chemical products for industrial use.Determination of relative temperature of spontaneous flammable of solids

NF T20-040:1985 工业用.和液水解后形成气的着火点测定

Chemical products for industrial use. Determination of inflammation of gases formed after hydrolysis of solids and liquids.

GOST R 54517-2011 取决于物理和性质的危险分类.状态可燃的试验方法

Classification of chemicals hazardous due to their physical and chemical properties. Test methods of flammable chemicals in solid state

GOST R 54517-2011(2019 取决于物理和性质的危险分类.状态可燃的试验方法

Classification of chemicals hazardous due to their physical and chemical properties. Test methods of flammable chemicals in solid state

GB/T 31857-2015 废弃分类规范

本标准规定了废弃固体化学品的分类和要求。 本标准适用于指导废弃固体化学品的产生者和专业废弃固体化学品处理机构对可再利用的废弃固体化学品进行分类、收集、日常管理等。 本标准不适用于实验室、医疗、放射性废弃固体化学品

Classification of solid chemical waste

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询