YS/T 862-2013 再生铸造铅黄铜型材
本标准规定了再生铸造铅黄铜型材的要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书及合同(或订货单)等内容、本标准适用于一般用途、以直条状供货、外接圆直径不大于90 mm的再生铅黄铜连续铸造型材
Recycling casting lead brass profile
GB/T 8737-1988 铸造黄铜锭
本标准适用于制造铜合金铸件用的铸造黄铜锭
Brass ingots for casting
YS/T 544-2006 铸造黄铜锭
GB/T 38470-2019 再生黄铜原料
Recycling materials for brass
JB/T 5108-1991 铸造黄铜.金相
本标准规定了铸造黄铜α相比例和铸造黄铜晶粒度的分级原则和评级方法。 本标准适用于评定铸造黄铜α相的比例和铸造黄铜的晶粒度
Cast brass Metallography
SAE AMS4855G-2009 85Cu-5.0Sn-5.0Pb-5.0Zn铸造的加铅红黄铜,砂和离心铸件
This specification covers a leaded red brass alloy in the form of sand and centrifugal castings. These castings have been used typically for parts
Leaded Red Brass, Sand and Centrifugal Castings 85Cu 5.0Sn 5.0Pb 5.0Zn As Cast
ASTM B140/B140M-07 铜锌铅杆材(铅红黄铜或硬青铜)、棒材和型材标准规范
1.1 This specification establishes the requirements for copper-zinc-lead (leaded red brass or hardware bronze) rod, bar, and shapes of UNS Alloy
Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
ASTM B453/B453M-11 铜锌铅合金(铅黄铜)条材,棒材及型材的标准规格
1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
GOST 24301-1993 铸造用青铜、黄铜棒材及管材.技术条件
Bronze and brass cast bars and tubes. Specifications
ASTM B455-96 铜锌铅合金(含铅黄铜)挤压型材标准规范
1.1 This specification establishes the requirements for extruded leaded-brass angles, channels, and other architectural shapes of solid cross
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B453/B453M-11(2017 铜锌铅合金(含铅黄铜)杆材, 棒材及型材的标准规格
1.1x00a0;This specification establishes the requirements
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
NF A53-707:1987 铸造产品.青铜和铅青铜铸件
FOUNDRY PRODUCTS. BRONZE AND BRONZE-LEAD CASTINGS. PROPERTIES.
ASTM B455-05 铜锌铅合金(加铅黄铜)挤压型材的标准规范
1.1 This specification establishes the requirements for extruded leaded-brass angles, channels, and other architectural shapes of solid cross
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B453/B453M-05 铜锌铅合金（铅黄铜）杆、棒和型材的标准规范
1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
ASTM B453/B453M-01 铜锌铅合金（铅黄铜）杆、棒和型材的标准规范
1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
YS/T 862-2013 再生铸造铅黄铜型材
本标准规定了再生铸造铅黄铜型材的要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书及合同(或订货单)等内容、本标准适用于一般用途、以直条状供货、外接圆直径不大于90 mm的再生铅黄铜连续铸造型材
Recycling casting lead brass profile
GB/T 8737-1988 铸造黄铜锭
本标准适用于制造铜合金铸件用的铸造黄铜锭
Brass ingots for casting
YS/T 544-2006 铸造黄铜锭
GB/T 38470-2019 再生黄铜原料
Recycling materials for brass
JB/T 5108-1991 铸造黄铜.金相
本标准规定了铸造黄铜α相比例和铸造黄铜晶粒度的分级原则和评级方法。 本标准适用于评定铸造黄铜α相的比例和铸造黄铜的晶粒度
Cast brass Metallography
SAE AMS4855G-2009 85Cu-5.0Sn-5.0Pb-5.0Zn铸造的加铅红黄铜,砂和离心铸件
This specification covers a leaded red brass alloy in the form of sand and centrifugal castings. These castings have been used typically for parts
Leaded Red Brass, Sand and Centrifugal Castings 85Cu 5.0Sn 5.0Pb 5.0Zn As Cast
ASTM B140/B140M-07 铜锌铅杆材(铅红黄铜或硬青铜)、棒材和型材标准规范
1.1 This specification establishes the requirements for copper-zinc-lead (leaded red brass or hardware bronze) rod, bar, and shapes of UNS Alloy
Standard Specification for Copper-Zinc-Lead (Red Brass or Hardware Bronze) Rod, Bar, and Shapes
ASTM B453/B453M-11 铜锌铅合金(铅黄铜)条材,棒材及型材的标准规格
1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
GOST 24301-1993 铸造用青铜、黄铜棒材及管材.技术条件
Bronze and brass cast bars and tubes. Specifications
ASTM B455-96 铜锌铅合金(含铅黄铜)挤压型材标准规范
1.1 This specification establishes the requirements for extruded leaded-brass angles, channels, and other architectural shapes of solid cross
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B453/B453M-11(2017 铜锌铅合金(含铅黄铜)杆材, 棒材及型材的标准规格
1.1x00a0;This specification establishes the requirements
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
NF A53-707:1987 铸造产品.青铜和铅青铜铸件
FOUNDRY PRODUCTS. BRONZE AND BRONZE-LEAD CASTINGS. PROPERTIES.
ASTM B455-05 铜锌铅合金(加铅黄铜)挤压型材的标准规范
1.1 This specification establishes the requirements for extruded leaded-brass angles, channels, and other architectural shapes of solid cross
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
ASTM B453/B453M-05 铜锌铅合金（铅黄铜）杆、棒和型材的标准规范
1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
ASTM B453/B453M-01 铜锌铅合金（铅黄铜）杆、棒和型材的标准规范
1.1 This specification establishes the requirements for copper-zinc-lead alloy (leaded-brass) rod, bar, wire, and shapes produced from Copper
Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Rod, Bar, and Shapes
编辑：北检院编辑部
