GB/T 8737-1988 铸造黄铜锭
本标准适用于制造铜合金铸件用的铸造黄铜锭
Brass ingots for casting
JB/T 5108-1991 铸造黄铜.金相
本标准规定了铸造黄铜α相比例和铸造黄铜晶粒度的分级原则和评级方法。 本标准适用于评定铸造黄铜α相的比例和铸造黄铜的晶粒度
Cast brass Metallography
YS/T 544-2006 铸造黄铜锭
JB/T 5108-2018 铸造黄铜金相检验
GOST 30609-1998 铸造黄铜.伦琴射线荧光分析法
Brass castings. Method of X-ray fluorescent analysis
NF A53-703:1982 重力与压力铸造黄铜件的特性
CASTINGS. CHARACTERISTICS OF BRASS GRAVITY AND PRESSURE CASTINGS.
JIS H 2202:1985 铸造用黄铜合金锭
Brass ingots for castings
YS/T 862-2013 再生铸造铅黄铜型材
本标准规定了再生铸造铅黄铜型材的要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书及合同(或订货单)等内容、本标准适用于一般用途、以直条状供货、外接圆直径不大于90 mm的再生铅黄铜连续铸造型材
Recycling casting lead brass profile
KS D 6007-1993(1998 高强度黄铜铸造
HIGH STRENGTH BRASS CASTINGS
CNS 4082-1988 铸造用高拉力黄铜锭
本标准适用于制造高拉力黄铜铸件所用之铸锭。（以下简称锭
High Strength Brass Ingots for Castings
JIS H 2205:1985 铸造用高强度黄铜合金锭
High strength brass ingots for castings
GOST 24301-1993 铸造用青铜、黄铜棒材及管材.技术条件
Bronze and brass cast bars and tubes. Specifications
KS D 2323-1990(1995 高强度黄铜合金铸造现在
HIGH STRENGTH BRASS INGOTS FOR CASTINGS
SAE AMS4855G-2009 85Cu-5.0Sn-5.0Pb-5.0Zn铸造的加铅红黄铜,砂和离心铸件
This specification covers a leaded red brass alloy in the form of sand and centrifugal castings. These castings have been used typically for parts
Leaded Red Brass, Sand and Centrifugal Castings 85Cu 5.0Sn 5.0Pb 5.0Zn As Cast
CNS 4336-2002 黄铜铸件
本标准适用于一般用黄铜铸件（以下简称铸件）。备考：本标准采用国际单位制（SI）。｛｝内之单位及数值仅供参考
Brass castings
GB/T 8737-1988 铸造黄铜锭
本标准适用于制造铜合金铸件用的铸造黄铜锭
Brass ingots for casting
JB/T 5108-1991 铸造黄铜.金相
本标准规定了铸造黄铜α相比例和铸造黄铜晶粒度的分级原则和评级方法。 本标准适用于评定铸造黄铜α相的比例和铸造黄铜的晶粒度
Cast brass Metallography
YS/T 544-2006 铸造黄铜锭
JB/T 5108-2018 铸造黄铜金相检验
GOST 30609-1998 铸造黄铜.伦琴射线荧光分析法
Brass castings. Method of X-ray fluorescent analysis
NF A53-703:1982 重力与压力铸造黄铜件的特性
CASTINGS. CHARACTERISTICS OF BRASS GRAVITY AND PRESSURE CASTINGS.
JIS H 2202:1985 铸造用黄铜合金锭
Brass ingots for castings
YS/T 862-2013 再生铸造铅黄铜型材
本标准规定了再生铸造铅黄铜型材的要求、试验方法、检验规则和标志、包装、运输、贮存、质量证明书及合同(或订货单)等内容、本标准适用于一般用途、以直条状供货、外接圆直径不大于90 mm的再生铅黄铜连续铸造型材
Recycling casting lead brass profile
KS D 6007-1993(1998 高强度黄铜铸造
HIGH STRENGTH BRASS CASTINGS
CNS 4082-1988 铸造用高拉力黄铜锭
本标准适用于制造高拉力黄铜铸件所用之铸锭。（以下简称锭
High Strength Brass Ingots for Castings
JIS H 2205:1985 铸造用高强度黄铜合金锭
High strength brass ingots for castings
GOST 24301-1993 铸造用青铜、黄铜棒材及管材.技术条件
Bronze and brass cast bars and tubes. Specifications
KS D 2323-1990(1995 高强度黄铜合金铸造现在
HIGH STRENGTH BRASS INGOTS FOR CASTINGS
SAE AMS4855G-2009 85Cu-5.0Sn-5.0Pb-5.0Zn铸造的加铅红黄铜,砂和离心铸件
This specification covers a leaded red brass alloy in the form of sand and centrifugal castings. These castings have been used typically for parts
Leaded Red Brass, Sand and Centrifugal Castings 85Cu 5.0Sn 5.0Pb 5.0Zn As Cast
CNS 4336-2002 黄铜铸件
本标准适用于一般用黄铜铸件（以下简称铸件）。备考：本标准采用国际单位制（SI）。｛｝内之单位及数值仅供参考
Brass castings
编辑：北检院编辑部
