GB/T 18446-2001 气相色谱法测定氨基甲酸酯预聚物和涂料溶液中未反应的甲苯二异氰酸酯(TDI)单体
本方法规定了气相色谱法测定氨基甲酸酯预聚物和涂料溶液中未反应的甲苯二异氰酸酯(TDI)单体含量的测定原理及试验方法。 本方法适用于气相色谱法测定氨基甲酸酯预聚物和涂料溶液中未反应的甲苯二异氰酸酯(TDI)单体含量，测定范围0.1%~10
Standard test method for unreacted toluene diisocyanates in urethane prepolymers and coatings solution by gas chromatography
ANSI/ASTM D5629:1999 聚氨基甲酸乙酯原材料试验方法:低酸性芳族异氰酸盐酯和聚氨基甲酸乙酯预聚物酸度的测定
This test method measures the acidity, expressed as ppm of hydrochloric acid (HCl), in aromatic isocyanate or polyurethane prepolymer samples
Test Method for Polyurethane Raw Materials: Determination of Acidity in Low Acidity Aromatic Isocyanates and Polyurethane Prepolymers (08.03)
ASTM D5629-05 聚氨基甲酸乙酯原料的标准试验方法:低酸度芳香异氰酸酯和聚氨基甲酸乙酯预聚物中酸度的测定
This test method can be used for research or for quality control to characterize aromatic isocyanates and low-acidity prepolymers
Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
ASTM D5629-99 聚氨基甲酸乙酯原料的标准试验方法:低酸度芳香异氰酸酯和聚氨基甲酸乙酯预聚物中酸度的测定
1.1 This test method covers the acidity, expressed as ppm of hydrochloric acid, in aromatic isocyanate or polyurethane prepolymer samples of below
Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
KS M 5969-2005 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的试验方法
이 규격은 우레탄 중간체나 프리폴리머 중의 이소시아네이트기(NCO)의 함유량을 분석하는 시
Testing method of isocyanate group content in urethane intermediate or prepolymer
ASTM D2572-97 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的试验方法
1.1 This test method covers the determination of the isocyanate group (NCO) content of a urethane intermediate or prepolymer.
1.2
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
ASTM D2572-19 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的试验方法
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
SAE AMS1377-1992 氯化溶剂的环氧涂料和聚氨基甲酸乙酯涂料系统的清洗剂
This specification covers a non-phenolic, non-chromated, thickened paint remover in the form of a solvent-base liquid. This cleaner has been used
Remover, Paint Epoxy and Polyurethane Paint System Non-Chlorinated Solvent
KS M 5969-2005(2018 测试方法或异氰酸酯基团含量氨基甲酸乙酯材料或预聚物
ASTM D2572-97(2010 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的标准试验方法
The percent NCO is used to establish unit ratios for stoichiometric reactions with co-reactants.
1.1 This test method covers
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
FORD WSS-M5H21-A-1995 氨基甲酸酯涂层的压花聚酯纺布
FABRIC, POLYESTER, NONWOVEN, EMBOSSED, URETHANE COATED
ISO 1233:1975 塑料.稀释溶液中甲基丙烯酸甲酯聚合物和共聚物粘度值的测定
Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution
HG/T 2626-1994 浇铸型甲基丙烯酸甲酯聚合物和共聚物稀溶液粘数测定
本标准规定了测定浇铸型甲基丙烯酸甲酯聚合物稀溶液粘数的方法。 本标准适用于浇铸型、非模塑挤出型的甲基丙烯酸甲酯(MMA)的均聚物、共聚物以及它们的混合物。在混合物中至少含有80%(m/m)的甲基丙烯酸甲酯聚合物。可含或不含添加剂
ASTM F624-98 生物医学用热塑性聚氨基甲酸乙酯固体及溶液的评定
1.1 This guide covers the evaluation of thermoplastic polyurethanes in both solid and solution form for biomedical applications. The polymers have
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
ASTM F624-98ae1 生物医学用热塑性聚氨基甲酸乙酯固体及溶液的评定
1.1 This guide covers the evaluation of thermoplastic polyurethanes in both solid and solution form for biomedical applications. The polymers have
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
GB/T 18446-2001 气相色谱法测定氨基甲酸酯预聚物和涂料溶液中未反应的甲苯二异氰酸酯(TDI)单体
本方法规定了气相色谱法测定氨基甲酸酯预聚物和涂料溶液中未反应的甲苯二异氰酸酯(TDI)单体含量的测定原理及试验方法。 本方法适用于气相色谱法测定氨基甲酸酯预聚物和涂料溶液中未反应的甲苯二异氰酸酯(TDI)单体含量，测定范围0.1%~10
Standard test method for unreacted toluene diisocyanates in urethane prepolymers and coatings solution by gas chromatography
ANSI/ASTM D5629:1999 聚氨基甲酸乙酯原材料试验方法:低酸性芳族异氰酸盐酯和聚氨基甲酸乙酯预聚物酸度的测定
This test method measures the acidity, expressed as ppm of hydrochloric acid (HCl), in aromatic isocyanate or polyurethane prepolymer samples
Test Method for Polyurethane Raw Materials: Determination of Acidity in Low Acidity Aromatic Isocyanates and Polyurethane Prepolymers (08.03)
ASTM D5629-05 聚氨基甲酸乙酯原料的标准试验方法:低酸度芳香异氰酸酯和聚氨基甲酸乙酯预聚物中酸度的测定
This test method can be used for research or for quality control to characterize aromatic isocyanates and low-acidity prepolymers
Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
ASTM D5629-99 聚氨基甲酸乙酯原料的标准试验方法:低酸度芳香异氰酸酯和聚氨基甲酸乙酯预聚物中酸度的测定
1.1 This test method covers the acidity, expressed as ppm of hydrochloric acid, in aromatic isocyanate or polyurethane prepolymer samples of below
Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
KS M 5969-2005 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的试验方法
이 규격은 우레탄 중간체나 프리폴리머 중의 이소시아네이트기(NCO)의 함유량을 분석하는 시
Testing method of isocyanate group content in urethane intermediate or prepolymer
ASTM D2572-97 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的试验方法
1.1 This test method covers the determination of the isocyanate group (NCO) content of a urethane intermediate or prepolymer.
1.2
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
ASTM D2572-19 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的试验方法
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
SAE AMS1377-1992 氯化溶剂的环氧涂料和聚氨基甲酸乙酯涂料系统的清洗剂
This specification covers a non-phenolic, non-chromated, thickened paint remover in the form of a solvent-base liquid. This cleaner has been used
Remover, Paint Epoxy and Polyurethane Paint System Non-Chlorinated Solvent
KS M 5969-2005(2018 测试方法或异氰酸酯基团含量氨基甲酸乙酯材料或预聚物
ASTM D2572-97(2010 氨基甲酸乙酯材料或预聚物中异氰酸酯基团的标准试验方法
The percent NCO is used to establish unit ratios for stoichiometric reactions with co-reactants.
1.1 This test method covers
Standard Test Method for Isocyanate Groups in Urethane Materials or Prepolymers
FORD WSS-M5H21-A-1995 氨基甲酸酯涂层的压花聚酯纺布
FABRIC, POLYESTER, NONWOVEN, EMBOSSED, URETHANE COATED
ISO 1233:1975 塑料.稀释溶液中甲基丙烯酸甲酯聚合物和共聚物粘度值的测定
Plastics — Determination of viscosity number of methyl methacrylate polymers and copolymers in dilute solution
HG/T 2626-1994 浇铸型甲基丙烯酸甲酯聚合物和共聚物稀溶液粘数测定
本标准规定了测定浇铸型甲基丙烯酸甲酯聚合物稀溶液粘数的方法。 本标准适用于浇铸型、非模塑挤出型的甲基丙烯酸甲酯(MMA)的均聚物、共聚物以及它们的混合物。在混合物中至少含有80%(m/m)的甲基丙烯酸甲酯聚合物。可含或不含添加剂
ASTM F624-98 生物医学用热塑性聚氨基甲酸乙酯固体及溶液的评定
1.1 This guide covers the evaluation of thermoplastic polyurethanes in both solid and solution form for biomedical applications. The polymers have
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
ASTM F624-98ae1 生物医学用热塑性聚氨基甲酸乙酯固体及溶液的评定
1.1 This guide covers the evaluation of thermoplastic polyurethanes in both solid and solution form for biomedical applications. The polymers have
Standard Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
编辑：北检院编辑部
