医用水刺涂胶无纺布（波浪形涂胶）检测

KS T 1053-2012 涂胶布

이 표준은 포장의 봉함, 보강 또는 접합 등에 사용하고, 물을 발라서 점착하는 천 검 테이

Gummed cloth tapes(for packaging)

KS T 1056-2011 包装用涂胶布

이 표준은 주로 포장, 봉함 등에 사용하는 것으로, 천을 지지물로 하고 한쪽 면에 점착제를

Pressure sensitive adhesive cloth tapes for packaging

CKS 218-1970 医用床单规范（涂布橡胶）（米制单位）

Covers the material, constructional and performance requirements for 2 types of rubber-covered fabric intended for use as hospital bed sheeting, viz

Hospital bed sheeting (rubber-proofed)

STAS 10035-1975 胶印涂布纸

1.1. Prezentul standard stabile?te calitatea h?itiei cretate fabricat? din h?rtie suport tratata la suprafa?a tip C STAS 9862-74, folosit? la

COATED PAPER FOR OFFSET PRINTING

JB/T 13976-2020 纺布水刺泵装置

ASTM D3738-16(2022 橡胶涂层布医院床单标准规范

Standard Specification for Rubber-Coated Cloth Hospital Sheeting

ARMY MIL-C-13621-1954 丁基橡胶涂层布

This commercial item description covers brown kraft paper used for general wrapping applications

CLOTH; COATED, BUTYL RUBBER

CGSB 9.67-94-CAN/CGSB-1994 涂布机械胶版纸

Coated Mechanical Offset Paper

Papier De Pate Mecanique Couche Offset

GB 10335-1989 胶版印刷涂布纸

Coated offset paper

T/YXJ 014-2021 水胶喷涂机

本文件规定了水胶喷涂机的产品组成、型号、基本参数、要求、试验方法、检验规则、标志、包装、运输和贮存

Spraying applicator for water based adhesive

GOST 3251-1991 衬垫用涂胶布.技术条件

Rubber textile. Specifications

FORD S-M3G4689-A-1994 压敏双面涂布胶带

TAPE, DOUBLE COATED, PRESSURE SENSITIVE

CGSB 1.100-99-CAN/CGSB-1999 内墙用光胶乳涂料

La présente Norme nationale du Canada a été élaborée sous les auspices de l’OFFICE DES NORMES GENERALES DU CANADA (ONGC), qui est un organisme

Peinture-Emulsion Mate D'Interieur

FORD WSS-M99G170-A-1995 单面涂布胶粘剂的硅橡胶涂层铝箔导热材料

THERMAL CONDUCTOR, SILICONE RUBBER COATED ALUMINUM FOIL, ADHESIVE COATED, ONE

JC/T 2317-2015 喷涂橡胶沥青防水涂料

ARMY A-A-59464 A VALID NOTICE 1-2008 (金属物体涂布用)塑料溶胶

Plastic Plastisol (for Coating Metallic Objects)

NAVY MIL-C-24576 A (1)-1988 石英玻璃布;有机硅橡胶涂层玻璃涂层布

This amendment forms a part of MIL-C-24576A(SH),dated 27 July 1987,and is approved for use with in the Naval Sea Systems Command, Departmentof

CLOTH, SILICA GLASS; CLOTH, COATED, GLASS, SILICONE RUBBER COATED

NAVY MIL-C-24576 A-1987 石英玻璃布;有机硅橡胶涂层玻璃涂层布

This specificatIonest ablIshes the requirements for two types of woven cloth intended for use In protecting equipment and personnel from s patter from

CLOTH, SILICA GLASS; CLOTH, COATED, GLASS, SILICONE RUBBER COATED

JB/T 12547-2015 涂附磨具 纺布抛光轮

本标准规定了纺布抛光轮的代号与标记、基本尺寸、技术要求、试验方法、检验规则、标志、运输、贮存和保质期。 本标准适用于用磨料、粘结剂和纺布制成的抛光轮

Coated abrasives.Non-woven wheel

GJB 252-1987 B501氟橡胶涂复玻璃布

HG/T 5776-2020 橡胶密封件表面涂覆用水性涂料

GME TM 239000-2003 针刺纺布地毯

Nadelvliesteppich Needle Punched Nonwoven Carpet

ASTM A824-01(2012 链环栅栏用波浪形拉力金属涂覆钢丝标准规格

1.1 This specification covers 0.177 in. (4.50 mm) diameter metallic-coated carbon

Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence

T/LFS 0002-2017 喷涂速凝橡胶沥青防水涂料

1.外观：:A组分搅拌后均匀色差、凝胶、结块，明显沥青丝。B组分结块，溶于水后能形成均一稳定的液体。2.A组分固体含量：本标准产品的固体含量主要针对A组分的橡胶沥青乳液，其B组分通常状态固体包装，使用时溶解在水中，因此固体含量仅针对A组分。作为水性涂料，固体含量越高运输成本越低，但考虑到

Sprayed quick setting rubber asphalt waterproof coating

T/SGFS 005-2020 喷涂速凝橡胶沥青防水涂料

6.1　外观 橡胶沥青乳液组分（A组分）搅拌后颜色均匀一致、凝胶、结块，丝状物。破乳剂（B组分）结块，溶于水后能形成均匀的液体。 6.2　物理力学性能 产品的物理力学性能应符合表1的规定。 表1　物理力学性能 序号　项目　指标 1　固体含量/％　≥　55 2　凝胶时间/s

HOLDEN HN 2240-2000 纺布消音粘合胶带

Adhesive Tape, Nonwoven, Sound Abatement

MSZ 2438-1980 波浪形石棉水泥

LY/T 1587-2000 涂胶机

本标准规定了涂胶机产品主参数、分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于涂胶辊长度从700mm至4500mm人造板用涂胶机

Glue spreader

CNS 7329-1981 医疗用胶布

本标准适用于医疗用胶布（以下简称胶布

Adhesive Tape, Medical

JIS K 6328 ERRATUM 1:2001 橡胶涂层纤维布(勘误 1)

Rubber coated fabrics (Erratum 1)