DB44/T 1447-2014 一次性聚乙烯薄膜手套
本标准规定了一次性聚乙烯薄膜手套（以下简称“手套”）的技术要求、试验方法、检验规则、标识、包装、运输和贮存。 本标准适用于以吹塑法生产的聚乙烯（PE）薄膜为主要原料，经压制热封工艺制成的一次性使用的手套
NAVY A-A-50379-1990 男式手套膜
This commercial item description covers the requirements for a men's leather work mitten shell of one type and size only to be worn over knit mittens
MITTEN SHELLS, MEN'S
MNOSZ 4095-1965 手术器具腹部薄膜钳
QB/T 3632-1999 聚氯乙烯热收缩薄膜、套管
本标准规定了聚氯乙烯热收缩薄膜、套管的技术要求、试验方法、检验规则等。 本标准适用于以聚氯乙烯树脂、增塑剂及各种添加剂为原料，采用泡管法成型的热缩膜、管。该产品具有遇热能收缩的特性，可用于电器、电子元件绝缘包装、一般物品包装和接触食品包装等
DLA MIL-F-36978 (1)-1974 导电塑料薄膜用完即弃鞋外套
Strapping shall not be required for shipments forwarded to a receiving activity within the . continental limfts of the United States for storage
FOOTWEAR COVERS, DISPOSABLE, CONDUCTIVE PLASTIC FILM
DLA MIL-F-36978-1973 导电塑料薄膜用完即弃鞋外套
This specification covers disposable, conductive footwear covers made from plastic film , and are worn by surgicai team members in surgical suites
FOOTWEAR COVERS, DISPOSABLE, CONDUCTIVE PLASTIC FILM
SAE AS955-2012 手动十二点高强度薄壁公制套筒扳手
This SAE Aerospace Standard (AS) covers high strength thin wall (commercial) metric sockets, universal metric sockets, metric box wrenches and metric
Metric Sockets, Wrenches, Hand Twelve Point, High Strength, Thin Wall
GB/Z 21212-2007 薄膜开关用聚酯薄膜
本指导性技术文件规定了薄膜开关用聚酯薄膜的要求、试验方法、检验规则、标志、包装、运输和贮存。 本指导性技术文件适用于由聚对苯二甲酸乙二醇酯经铸片及双轴定向拉伸而制得的薄膜,适用于薄膜开关及柔性线路板制造行业
Polyester film for membrane switches
ISO 17557:2003 塑料.薄膜和薄板.铸造聚丙烯薄膜
This International Standard specifies the requirements for cast polypropylene (PP) films, which are mainly used for packaging
Plastics - Film and sheeting - Cast polypropylene (PP) films
GME STD 518053-1995 塑料薄膜8053.聚氯乙烯(PVC)薄膜薄膜 英语/瑞典语
Plastic foil 8053 PVC foil Plastfolie 8053 PVC-folie English/Swedish
GJB 988.3-1990 军用橡胶薄膜 丁腈胶薄膜
GJB 988.1-1990 军用橡胶薄膜 氯丁胶薄膜
GJB 76.4-1985 航空用聚酰亚胺薄膜绝缘电线电缆 铝芯PI／F46薄膜绝缘F4生带护套电线
BS ISO 23559:2011 塑料.薄膜和薄板.热塑薄膜测试指南
Plastics. Film and sheeting. Guidance on the testing of thermoplastic films
KS M ISO 17557-2017(2022 塑料.薄膜和薄板.浇铸聚丙烯（PP）薄膜
Plastics - Film and sheeting - Cast polypropylene(PP) films
MNOSZ 5463-1952 工作手套 (五手指手套)
MSZ 12399/1.lap-1966 工作手套(五手指手套)
ASME B107.7-1978 扳手，花键套筒，方形驱动，高强度，薄壁;箱形扳手，高强度，薄壁 （英制系列）
This standard is intended to cover the complete general and dimensional data for detachable socket wrenches and box wrenches for use on high strength
Wrenches, Splined Socket, Square Drive, High Strength, Thin Wall; Box Wrench, High Strength, Thin Wall (Inch Series)
DIN 55531:2011 包装用塑料薄膜.复合铝薄膜
Films for packaging - Composite aluminium films
ISO 23559:2007 塑料.薄膜和薄板.热塑薄膜的测试指南
This International Standard identifies specific test procedures to assist producers and users in the selection and characterization of thermoplastic
Plastics - Film and sheeting - Guidance on the testing of thermoplastic films
BS ISO 17557:2003 塑料.薄膜和薄板.铸造的聚丙烯(PP)薄膜
This International Standard specifies the requirements for cast polypropylene (PP) films, which are mainly used for packaging
Plastics - Film and sheeting - Cast polypropylene (PP) films
KS M ISO 23559:2014 塑料 薄膜和薄片 热塑性薄膜测试指导
이 표준은 단층 또는 다층 형태로 이루어진 열가소성 필름의 선택과 물성 측정을 위하여 생산자와 사용자를 도울 수 있는 특정한 시험 절차에 대해 규정한다. 이 표준은 기존 표준이나 시방서가 없는 열가소성 필름에 대한 지침으로 사용한다.
특정 필름 제품의 국제
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
KS M ISO 23559:2019 塑料 - 薄膜和薄片 - 热塑性薄膜测试指导
Plastics — Film and sheeting — Guidance on the testing of thermoplastic films
GB/T 3390.1-2013 手动套筒扳手 套筒
本标准规定了手动套筒扳手套筒的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存。本标准适用于装拆六角螺栓和螺母的手动套筒扳手套筒
Hand operated socket wrenches.Socket
GB/T 3390.1-2004 手动套筒扳手 套筒
本标准规定了手动套筒扳手套筒的产品分类、技术要求、试验方法、检验规则、包装、标志、运输与贮存。 本标准适用于装拆六角螺栓和螺母的手动套筒扳手的套筒
Hand operated socket wrenches-Socket
T/SHPTA 024.1-2022 光电显示用聚酯薄膜-扩散膜用聚酯薄膜
本文件给出了扩散膜用聚酯薄膜的术语和定义、要求、试验方法、检验规则、包装、标志和贮运
Polyester film for photoelectric display Part?1?Polyester?Film?for?Diffuser?Film
T/SHPTA 024.2-2022 光电显示用聚酯薄膜-增亮膜用聚酯薄膜
本文件给出了增亮膜用聚酯薄膜的术语和定义、要求、试验方法、检验规则、包装、标志和贮运
Polyester film for photoelectric display Part?2?Polyester?Film?for?Brightness?Enhancement?Film
KS M ISO 17555:2012 塑料.薄膜和薄板.双轴取向的聚丙烯薄膜
이 표준은 주로 포장재(이하, 필름)로 사용되는 이축 연신 폴리프로필렌 필름에 대하여 규정
Plastics-Film and sheeting- Biaxially oriented polypropylene(PP) films
ISO 17555:2003 塑料.薄膜和薄板.双轴取向的聚丙烯薄膜
This International Standard specifies the requirements for biaxially oriented polypropylene (PP) films, which are mainly used for packaging. The film
Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films
ISO 17555:2021 塑料.薄膜和薄板.双轴取向的聚丙烯薄膜
Plastics - Film and sheeting - Biaxially oriented polypropylene (PP) films
编辑：北检院编辑部
