电工用火法精炼再生铜线坯检测

YS/T 793-2012 电工用火法精炼再生铜线坯

本标准规定了以紫杂铜为原料经火法精炼和连铸连轧生产的电工用再生铜线坯的要求、试验方法、检验规则及标志、包装、运输和贮存、质量证明书及订货单（或合同）内容。 本标准适用于直径为6.0mm～35.0mm,供进一步拉制电工用线材或其他电工用铜导体的圆形截面铜线坯

Copper drawing stock from recycling for electrical purpose by pyrometallurgy

NB/T 10194-2019 电工用火法精炼高导电铜杆

ASTM B216-97(2003 火法精炼工业纯铜标准规范.精炼型材

1.1 This specification establishes the requirements for tough-pitch fire-refined copper wire bars, cakes, slabs, and billets for fabricating

Standard Specification for Tough-Pitch Fire-Refined Copper8212;Refinery Shapes

GB/T 3952-2008 电工用铜线坯

本标准规定了电工用铜线坯的要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于直径6.0mm～35.0mm，供进一步拉制线材或其他电工用铜导体的圆形截面铜线坯

Copper drawing stock for electrical purpose

GB/T 3952-1998 电工用铜线坯

本标准规定了电工用铜线坯的要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于直径为6.0～35.0mm、供进一步拉制线材或其他电工用铜导体的圆形截面铜线坯

Copper drawing stock for electrical purposes

T/JXTX 0001-2020 江西绿色生态 电工用铜线坯

3 术语和定义      DB36/T 1138-2019界定的以及下列术语和定义适用于本文件。 3.1　     电工用铜线坯 copper 

Copper drawing stock for electrical purpose - Jiangxi green ecology

GB/T 3952-2016 电工用铜线坯

ASTM B216-10 火法精炼韧炼铜8212的标准规格.精炼型材

Calculated values shall be rounded to the nearest unit in the last right-hand significant digit used in expressing the limiting value in accordance

Standard Specification for Tough-Pitch Fire-Refined Copper&8212;Refinery Shapes

GB 51030-2014 再生铜冶炼厂工艺设计规范

本规范适用于新建、改建、扩建再生铜冶炼厂的工艺设计

Code for design of secondary copper smelter processes

GB/T 31980-2015 电解铜箔用再生铜线

本标准规定了电解铜箔用再生铜线的要求、试验方法、检验规则和标志、包装、运输、贮存、订货单(或合同)内容。 本标准适用于废电线电缆经分类、加工而产生的再生金属铜线，主要用作电解铜箔的原料

Recycling copper wire for electrodeposited copper foil

ASTM B216-22 硬沥青耐火精炼铜精炼型材的标准规范

Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

JUS C.D1.011-1990 铜和铜合金．韧性火法精炼铜．化学成分和使用说明

Copper and copper allojrs. Fire-refined tougb pltcb copper. Chemical composition and applicaticm directicms

ASTM B216-16 难沥火炼铜的标准规格. 精炼型材

13.1x00a0;Calculated values shall be rounded to the nearest

Standard Specification for Tough-Pitch Fire-Refined Copper&x2014;Refinery Shapes

ASTM B216-97 炉精炼铜用标准规范.精炼型材

1.1 This specification establishes the requirements for tough-pitch fire-refined copper wire bars, cakes, slabs, and billets for fabricating

Standard Specification for Tough-Pitch Fire-Refined Copper Refinery Shapes

CGSB 3.1010-93-CAN/CGSB-1993 再精炼基础油

The STANDARDS COUNCIL OF CANADA is the co-ordinating under whose auspices this National Standard of Canada has been body of the National Standards

Huiles De Base Regenerees

YS/T 793-2012 电工用火法精炼再生铜线坯

本标准规定了以紫杂铜为原料经火法精炼和连铸连轧生产的电工用再生铜线坯的要求、试验方法、检验规则及标志、包装、运输和贮存、质量证明书及订货单（或合同）内容。 本标准适用于直径为6.0mm～35.0mm,供进一步拉制电工用线材或其他电工用铜导体的圆形截面铜线坯

Copper drawing stock from recycling for electrical purpose by pyrometallurgy

NB/T 10194-2019 电工用火法精炼高导电铜杆

ASTM B216-97(2003 火法精炼工业纯铜标准规范.精炼型材

1.1 This specification establishes the requirements for tough-pitch fire-refined copper wire bars, cakes, slabs, and billets for fabricating

Standard Specification for Tough-Pitch Fire-Refined Copper8212;Refinery Shapes

GB/T 3952-2008 电工用铜线坯

本标准规定了电工用铜线坯的要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于直径6.0mm～35.0mm，供进一步拉制线材或其他电工用铜导体的圆形截面铜线坯

Copper drawing stock for electrical purpose

GB/T 3952-1998 电工用铜线坯

本标准规定了电工用铜线坯的要求、试验方法、检验规则及标志、包装、运输和贮存。 本标准适用于直径为6.0～35.0mm、供进一步拉制线材或其他电工用铜导体的圆形截面铜线坯

Copper drawing stock for electrical purposes

T/JXTX 0001-2020 江西绿色生态 电工用铜线坯

3 术语和定义      DB36/T 1138-2019界定的以及下列术语和定义适用于本文件。 3.1　     电工用铜线坯 copper 

Copper drawing stock for electrical purpose - Jiangxi green ecology

GB/T 3952-2016 电工用铜线坯

ASTM B216-10 火法精炼韧炼铜8212的标准规格.精炼型材

Calculated values shall be rounded to the nearest unit in the last right-hand significant digit used in expressing the limiting value in accordance

Standard Specification for Tough-Pitch Fire-Refined Copper&8212;Refinery Shapes

GB 51030-2014 再生铜冶炼厂工艺设计规范

本规范适用于新建、改建、扩建再生铜冶炼厂的工艺设计

Code for design of secondary copper smelter processes

GB/T 31980-2015 电解铜箔用再生铜线

本标准规定了电解铜箔用再生铜线的要求、试验方法、检验规则和标志、包装、运输、贮存、订货单(或合同)内容。 本标准适用于废电线电缆经分类、加工而产生的再生金属铜线，主要用作电解铜箔的原料

Recycling copper wire for electrodeposited copper foil

ASTM B216-22 硬沥青耐火精炼铜精炼型材的标准规范

Standard Specification for Tough-Pitch Fire-Refined Copper—Refinery Shapes

JUS C.D1.011-1990 铜和铜合金．韧性火法精炼铜．化学成分和使用说明

Copper and copper allojrs. Fire-refined tougb pltcb copper. Chemical composition and applicaticm directicms

ASTM B216-16 难沥火炼铜的标准规格. 精炼型材

13.1x00a0;Calculated values shall be rounded to the nearest

Standard Specification for Tough-Pitch Fire-Refined Copper&x2014;Refinery Shapes

ASTM B216-97 炉精炼铜用标准规范.精炼型材

1.1 This specification establishes the requirements for tough-pitch fire-refined copper wire bars, cakes, slabs, and billets for fabricating

Standard Specification for Tough-Pitch Fire-Refined Copper Refinery Shapes

CGSB 3.1010-93-CAN/CGSB-1993 再精炼基础油

The STANDARDS COUNCIL OF CANADA is the co-ordinating under whose auspices this National Standard of Canada has been body of the National Standards

Huiles De Base Regenerees