含金物料检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

YS/T 3006-2011 氰化浸出锌粉置换提工艺理论回收率计算方法

本标准规定了含金物料氰化浸出锌粉置换提金工艺过程理论回收率计算方法。 本标准适用于金矿石、浮选金精矿、或金矿石、浮选金精矿经焙烧、生物氧化及其他工艺预处理后氰化浸出锌粉置换提金工艺过程

Calculation methods of gold recovery rate of cyanide leaching and zinc dust precipitation

SN/T 5248-2020 进口载树脂量的测定方法 火焰原子吸收光谱法

GOST 26318.11-1984 非属矿.水分量测定法

Non-metallic ore materials. Gravimetric method for determination of moisture mass fraction

GOST 26318.13-1984 非属矿.石英量测定法

Non-metallic ore materials. Method for determination of quartz mass fraction

GOST 26318.12-1984 非属矿.水分量红外测定法

Non-metallic ore materials. Infra-red method for determination of moisture mass fraction

GOST 26318.3-1984 非属矿.氧化铁量测定法

Non-metallic ore materials. Methods for determination of iron oxide mass fraction

GOST 26318.8-1984 非属矿.氧化钾量的放射分析法

Non-metallic ore materials. Radiometric method for determination of potassium oxide mass fraction

SN/T 3469.4-2013 进口粗炼或烧铜、银量的测定方法 火焰原子吸收光谱法

SN/T 3469的本部分规定了进口粗炼或烧结铜物料中金、银含量的火焰原子吸收光谱测定方法。本部分适用于进口粗炼或烧结铜物料中金、银含量的测定。测定范围为Au:0.2 g/g~50 g/g;Ag:0.5 g/g~500 g/g

Determination of gold and silver content in import copper matte or sintered copper material.Flame atomic absorption spectrometry

SIS SS 02 81 87-1986 水分析.原子吸收光谱法测定生中的量.蒸煮

Metal content of biological material determined by atomic absorption spectrometry — Digestion

GOST 25118-1982 属络合1.2的酸性有机染.浓度和色调测定方法

Organic acid metallized (1:2) dyes. Determinations of concentration and shade

GOST 25119-1982 属络合1.2的酸性有机染.对纤维质着色能力测定方法

Oranic acid metallized (1:2) dyes. Test method of dueability of fibrous materials

ASTM E2294-03 用火试重量分析法验证属矿、浓缩及相关材中银修正值的标准实施规范

This practice is primarily intended to be used for the correction of silver loss in the fire assay process. Silver assays

Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry

ASTM E2294-03(2013 用火试重量分析法验证属矿, 浓缩及相关材中银修正值的标准实施规范

5.1x00a0;This practice is primarily intended to be used for the correction of silver loss in the fire

Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

ASTM E2294-03(2008)e1 用火试重量分析法验证属矿、浓缩及相关材中银修正值的标准实施规范

This practice is primarily intended to be used for the correction of silver loss in the fire assay process. Silver assays are determined by fire

Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry

GOST 26318.2-1984 非属矿.二氧化硅量测定法

Non-metallic ore materials. Method for determination of silica mass fraction

YS/T 3006-2011 氰化浸出锌粉置换提工艺理论回收率计算方法

本标准规定了含金物料氰化浸出锌粉置换提金工艺过程理论回收率计算方法。 本标准适用于金矿石、浮选金精矿、或金矿石、浮选金精矿经焙烧、生物氧化及其他工艺预处理后氰化浸出锌粉置换提金工艺过程

Calculation methods of gold recovery rate of cyanide leaching and zinc dust precipitation

SN/T 5248-2020 进口载树脂量的测定方法 火焰原子吸收光谱法

GOST 26318.11-1984 非属矿.水分量测定法

Non-metallic ore materials. Gravimetric method for determination of moisture mass fraction

GOST 26318.13-1984 非属矿.石英量测定法

Non-metallic ore materials. Method for determination of quartz mass fraction

GOST 26318.12-1984 非属矿.水分量红外测定法

Non-metallic ore materials. Infra-red method for determination of moisture mass fraction

GOST 26318.3-1984 非属矿.氧化铁量测定法

Non-metallic ore materials. Methods for determination of iron oxide mass fraction

GOST 26318.8-1984 非属矿.氧化钾量的放射分析法

Non-metallic ore materials. Radiometric method for determination of potassium oxide mass fraction

SN/T 3469.4-2013 进口粗炼或烧铜、银量的测定方法 火焰原子吸收光谱法

SN/T 3469的本部分规定了进口粗炼或烧结铜物料中金、银含量的火焰原子吸收光谱测定方法。本部分适用于进口粗炼或烧结铜物料中金、银含量的测定。测定范围为Au:0.2 g/g~50 g/g;Ag:0.5 g/g~500 g/g

Determination of gold and silver content in import copper matte or sintered copper material.Flame atomic absorption spectrometry

SIS SS 02 81 87-1986 水分析.原子吸收光谱法测定生中的量.蒸煮

Metal content of biological material determined by atomic absorption spectrometry — Digestion

GOST 25118-1982 属络合1.2的酸性有机染.浓度和色调测定方法

Organic acid metallized (1:2) dyes. Determinations of concentration and shade

GOST 25119-1982 属络合1.2的酸性有机染.对纤维质着色能力测定方法

Oranic acid metallized (1:2) dyes. Test method of dueability of fibrous materials

ASTM E2294-03 用火试重量分析法验证属矿、浓缩及相关材中银修正值的标准实施规范

This practice is primarily intended to be used for the correction of silver loss in the fire assay process. Silver assays

Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry

ASTM E2294-03(2013 用火试重量分析法验证属矿, 浓缩及相关材中银修正值的标准实施规范

5.1x00a0;This practice is primarily intended to be used for the correction of silver loss in the fire

Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates, and Related Materials by Fire Assay Gravimetry

ASTM E2294-03(2008)e1 用火试重量分析法验证属矿、浓缩及相关材中银修正值的标准实施规范

This practice is primarily intended to be used for the correction of silver loss in the fire assay process. Silver assays are determined by fire

Standard Practice for Proof Silver Corrections in Metal Bearing Ores, Concentrates and Related Materials by Fire Assay Gravimetry

GOST 26318.2-1984 非属矿.二氧化硅量测定法

Non-metallic ore materials. Method for determination of silica mass fraction

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验