模塑和挤塑塑料检测

GB/T 1040.2-2006 塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件

1.1 GB/T 1040 的本部分在第 1 部分基础上规定了用于测定模塑和挤塑塑料拉伸性能的试验条件。 1.2 本部分适用于下述范围的材料： ——硬质和半硬质的热塑性模塑、挤塑和铸塑材料，除未填充类型外还包括例如用短纤维、细棒、小薄片或细粒料填充和增强的复合材料

Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics

GB/T 1040.2-2022 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件

Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics

TCVN 4501-2-2009 塑料.拉伸性能的测定.第2部分:模塑和挤塑塑料的试验条件

Plastics.Determination of tensile propertie.Part 2: Test conditions for moulding and extrusion plastics

KS M ISO 527-2-2013(2018 塑料拉伸性能的测定第2部分:模塑和挤塑塑料的试验条件

Plastics ㅡ Determination of tensile properties ㅡ Part 2: Test conditions for moulding and extrusion plastics

FORD ESB-M4D263-C1-2006 电工级、耐高温、自熄型聚苯醚（PPE）改性模塑和挤塑塑料***与标准FORD WSS-M99P1111-A一起使用***

POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - ELECTRICAL GRADE SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***

ANSI/ASTM D2581:2001 聚丁烯塑料模塑和挤塑材料规范(08.02,08.04)

This classification system covers polybutylene plastics materials suitable for molding and extrusion. This classification system allows for the use

Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (08.02, 08.04)

ANSI/ASTM D5203:1998 再生高密度聚乙烯材料模塑和挤塑聚乙烯塑料规范

This specification provides for the identification of recycled post-consumer HDPE molding and extrusion materials, from specified sources, in pellet

Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03)

ASTM D3641-15 热模塑和挤塑材料的喷射模塑法试样标准规程

5.1x00a0;It is well known that plastic test specimens molded

Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

ASTM D3641-97 热模塑和挤塑材料的喷射模塑法试样标准规程

1.1 This practice covers the general principles to be followed when injection molding test specimens of thermoplastic molding and extrusion

Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

ASTM D3641-02 热模塑和挤塑材料的喷射模塑法试样标准规程

It is well known that plastic test specimens molded under different conditions can have significantly different properties

Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

BS ISO 9988-1:2004 塑料.聚甲醛模塑和挤塑材料.命名体系和基本规范

1 This part of ISO 9988 establishes a system of designation for polyoxymethylene (POM) thermoplastic materials, which may be used as the basis

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Designation system and basis for specifications

KS M ISO 15526-2-2006(2011 塑料聚酮模塑和挤塑材料第2部分:试样制备和性能测定

Plastics－Polyketone(PK) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

KS M ISO 15526-1-2006(2011 塑料聚酮模塑和挤塑材料第1部分:命名体系和规范基础

Plastics－Polyketone(PK) moulding and extrusion materials－Part 1：Designation system and basis for specifications

BS EN ISO 20028-1:2017 塑料.热塑性聚酯(TP)模塑和挤塑材料.命名体系和基本规格

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications

BS EN ISO 7792-1:2012 塑料.热塑性聚酯(TP)模塑和挤塑材料.命名体系和基本规格

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications

GB/T 1040.2-2006 塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件

1.1 GB/T 1040 的本部分在第 1 部分基础上规定了用于测定模塑和挤塑塑料拉伸性能的试验条件。 1.2 本部分适用于下述范围的材料： ——硬质和半硬质的热塑性模塑、挤塑和铸塑材料，除未填充类型外还包括例如用短纤维、细棒、小薄片或细粒料填充和增强的复合材料

Plastics. Determination of tensile properties. Part 2: Test conditions for moulding and extrusion plastics

GB/T 1040.2-2022 塑料 拉伸性能的测定 第2部分：模塑和挤塑塑料的试验条件

Plastics—Determination of tensile properties—Part 2: Test conditions for moulding and extrusion plastics

TCVN 4501-2-2009 塑料.拉伸性能的测定.第2部分:模塑和挤塑塑料的试验条件

Plastics.Determination of tensile propertie.Part 2: Test conditions for moulding and extrusion plastics

KS M ISO 527-2-2013(2018 塑料拉伸性能的测定第2部分:模塑和挤塑塑料的试验条件

Plastics ㅡ Determination of tensile properties ㅡ Part 2: Test conditions for moulding and extrusion plastics

FORD ESB-M4D263-C1-2006 电工级、耐高温、自熄型聚苯醚（PPE）改性模塑和挤塑塑料***与标准FORD WSS-M99P1111-A一起使用***

POLYPHENYLENE OXIDE (PPE), MODIFIED MOLDING AND EXTRUSION COMPOUND - HIGH HEAT - ELECTRICAL GRADE SELF EXTINGUISHING ***TO BE USED WITH FORD WSS-M99P1111-A***

ANSI/ASTM D2581:2001 聚丁烯塑料模塑和挤塑材料规范(08.02,08.04)

This classification system covers polybutylene plastics materials suitable for molding and extrusion. This classification system allows for the use

Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials (08.02, 08.04)

ANSI/ASTM D5203:1998 再生高密度聚乙烯材料模塑和挤塑聚乙烯塑料规范

This specification provides for the identification of recycled post-consumer HDPE molding and extrusion materials, from specified sources, in pellet

Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer HDPE Sources (08.03)

ASTM D3641-15 热模塑和挤塑材料的喷射模塑法试样标准规程

5.1x00a0;It is well known that plastic test specimens molded

Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

ASTM D3641-97 热模塑和挤塑材料的喷射模塑法试样标准规程

1.1 This practice covers the general principles to be followed when injection molding test specimens of thermoplastic molding and extrusion

Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

ASTM D3641-02 热模塑和挤塑材料的喷射模塑法试样标准规程

It is well known that plastic test specimens molded under different conditions can have significantly different properties

Standard Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials

BS ISO 9988-1:2004 塑料.聚甲醛模塑和挤塑材料.命名体系和基本规范

1 This part of ISO 9988 establishes a system of designation for polyoxymethylene (POM) thermoplastic materials, which may be used as the basis

Plastics - Polyoxymethylene (POM) moulding and extrusion materials - Designation system and basis for specifications

KS M ISO 15526-1-2006(2011 塑料聚酮模塑和挤塑材料第1部分:命名体系和规范基础

Plastics－Polyketone(PK) moulding and extrusion materials－Part 1：Designation system and basis for specifications

KS M ISO 15526-2-2006(2011 塑料聚酮模塑和挤塑材料第2部分:试样制备和性能测定

Plastics－Polyketone(PK) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

BS EN ISO 20028-1:2017 塑料.热塑性聚酯(TP)模塑和挤塑材料.命名体系和基本规格

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications

BS EN ISO 7792-1:2012 塑料.热塑性聚酯(TP)模塑和挤塑材料.命名体系和基本规格

Plastics. Thermoplastic polyester (TP) moulding and extrusion materials. Designation system and basis for specifications