BS 4395-2:1969 结构工程用高强度摩擦扣紧螺栓和配套螺母及垫圈规范.第2部分:较高等级螺栓、螺母和通用级垫圈
Higher grade friction grip bolts (10.9) and nuts (12) and general grade washers. Dimensions in the nominal size range 16 mm to 33 mm inclusive
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. Higher grade bolts and nuts and general grade washers
GB/T 1231-1991 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件
本标准规定了钢结构用高强度大六角头螺栓、大六角螺母、垫圈及连接副的技术要求、试验方法、检验规则、标记及包装。 本标准适用于铁路和公路桥梁、锅炉钢结构、工业厂房、高层民用建筑、塔桅结构、起重机械及其他钢结构摩擦型高强度螺栓连接
Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures
AS/NZS 1252-1996 建筑工程用的带螺母和垫圈的高强度钢螺钉
Specifies requirements for high strength steel bolts of property class 8.8 and steel nuts of property class 8 with ISO metric coarse pitch series
High strength steel bolts with associated nuts and washers for structural engineering
GB/T 1231-2006 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件
本标准规定了钢结构用高强度大六角头螺栓、大六角螺母、垫圈及连接副的技术要求、试验方法、检验规则、标志及包装。 本标准适用于铁路和公路桥梁、锅炉钢结构、工业厂房、高层民用建筑、塔桅结构、起重机械及其他钢结构摩擦型高强度螺栓连接
Specifications of high strength bolts with large hexagon head ，large hexagon nuts，plain washers for steel structures
BS 4395-1:1969 结构工程用高强度摩擦扣紧螺栓和配套螺母及垫圈规范.第1部分:通用级
Gives dimensions for range of nominal sizes from 12 mm (M12) to 36 mm (M36) inclusive and specifies mechanical properties. Full details of tests
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering - General grade
GOST 32484.5-2013 预加载高强度结构螺栓组件. 平垫圈
High-strength structural bolting assemblies for preloading. Plain washers
SANS 1700-16-8:2004 紧固件．第16部分：垫圈．第8节：高强度结构螺栓用经淬硬和回火的平垫圈
Specifies hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts of diameters
Fasteners Part 16: Washers Section 8: Plain washers for high-strength structural bolting, hardened and tempered
T/ZZB 0263-2017 风力发电用高强度螺栓、螺母和垫圈
本标准规定了风力发电用高强度螺栓、螺母和垫圈的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和存储及质量承诺。 本标准适用于公称直径为12 mm～64 mm风力发电用的高强度螺栓、螺母和垫圈（以下简称为螺栓、螺母和垫圈）。 本标准规定的螺栓、螺母和垫圈
High strength bolts, nuts and washer for wind power
BS EN 14399-5:2015 预负载用高强度结构螺栓连接组件.平垫圈
High-strength structural bolting assemblies for preloading. Plain washers
BS EN 14399-5:2005 预负载用高强度结构螺栓连接组件.平垫圈
This document specifies, together with EN 14399-1, hardened and tempered plain washers intended for assembly with large series hexagon high-strength
High-strength structural bolting assemblies for preloading - Plain washers
GOST 32484.6-2013 预加载高强度结构螺栓组件. 平倒角垫圈
High-strength structural bolting assemblies for preloading. Plain chamfered washers
SANS 1700-16-9:2004 紧固件．第16部分：垫圈．第9节：高强度结构螺栓用经淬硬和回火的倒角平垫圈
Specifies chamfered, hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts
Fasteners Part 16: Washers Section 9: Plain washers, chamfered, hardened, and tempered for high-strength structural bolting
JIS B 1186 AMD 1:2007 摩擦夹紧连接件用高强度六角螺栓、六角螺母和平垫圈组件(修改件1)
備考I.のJIS B 0205メートル並目ねじを，JIS B 0205-I 一般用メートルねじ一第1部:基準山形， JIS B 0205-2 一般用メートルねじ一第2部:全体系，JIS B 0205-3一般用メートルねじ一第3部:ねじ部品用に選択したサイズ及びJIS B 0205-4 一般用メートル
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints (Amendment 1)
KS R ISO 6305-4:2004 铁路构件.交货技术条件.第4部分:鱼尾板和紧固件用的非处理钢螺母和螺栓及高强度螺母和螺栓
이 규격은 이음판을 채우기 위한 미처리 강제 볼트/너트와 고장력 볼트/너트에 대한 제품
Railway components-Technical delivery requirements-Part 4:Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
KS R ISO 6305-4:2013 铁路构件 交货技术条件 第4部分：鱼尾板和紧固件用的非处理钢螺母和螺栓及高强度螺母和螺栓
Railway components－Technical delivery requirements－Part 4：Untreated steel nuts and bolts and high－strength nuts and bolts for fish－plates and fastenings
BS 4395-2:1969 结构工程用高强度摩擦扣紧螺栓和配套螺母及垫圈规范.第2部分:较高等级螺栓、螺母和通用级垫圈
Higher grade friction grip bolts (10.9) and nuts (12) and general grade washers. Dimensions in the nominal size range 16 mm to 33 mm inclusive
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering. Higher grade bolts and nuts and general grade washers
GB/T 1231-1991 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件
本标准规定了钢结构用高强度大六角头螺栓、大六角螺母、垫圈及连接副的技术要求、试验方法、检验规则、标记及包装。 本标准适用于铁路和公路桥梁、锅炉钢结构、工业厂房、高层民用建筑、塔桅结构、起重机械及其他钢结构摩擦型高强度螺栓连接
Specifications of high strength bolts with large hexagon head, large hexagon nuts,plain washers for steel structures
AS/NZS 1252-1996 建筑工程用的带螺母和垫圈的高强度钢螺钉
Specifies requirements for high strength steel bolts of property class 8.8 and steel nuts of property class 8 with ISO metric coarse pitch series
High strength steel bolts with associated nuts and washers for structural engineering
GB/T 1231-2006 钢结构用高强度大六角头螺栓、大六角螺母、垫圈技术条件
本标准规定了钢结构用高强度大六角头螺栓、大六角螺母、垫圈及连接副的技术要求、试验方法、检验规则、标志及包装。 本标准适用于铁路和公路桥梁、锅炉钢结构、工业厂房、高层民用建筑、塔桅结构、起重机械及其他钢结构摩擦型高强度螺栓连接
Specifications of high strength bolts with large hexagon head ，large hexagon nuts，plain washers for steel structures
BS 4395-1:1969 结构工程用高强度摩擦扣紧螺栓和配套螺母及垫圈规范.第1部分:通用级
Gives dimensions for range of nominal sizes from 12 mm (M12) to 36 mm (M36) inclusive and specifies mechanical properties. Full details of tests
Specification for high strength friction grip bolts and associated nuts and washers for structural engineering - General grade
GOST 32484.5-2013 预加载高强度结构螺栓组件. 平垫圈
High-strength structural bolting assemblies for preloading. Plain washers
SANS 1700-16-8:2004 紧固件．第16部分：垫圈．第8节：高强度结构螺栓用经淬硬和回火的平垫圈
Specifies hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts of diameters
Fasteners Part 16: Washers Section 8: Plain washers for high-strength structural bolting, hardened and tempered
T/ZZB 0263-2017 风力发电用高强度螺栓、螺母和垫圈
本标准规定了风力发电用高强度螺栓、螺母和垫圈的术语和定义、基本要求、技术要求、试验方法、检验规则、标志、包装、运输和存储及质量承诺。 本标准适用于公称直径为12 mm～64 mm风力发电用的高强度螺栓、螺母和垫圈（以下简称为螺栓、螺母和垫圈）。 本标准规定的螺栓、螺母和垫圈
High strength bolts, nuts and washer for wind power
BS EN 14399-5:2015 预负载用高强度结构螺栓连接组件.平垫圈
High-strength structural bolting assemblies for preloading. Plain washers
BS EN 14399-5:2005 预负载用高强度结构螺栓连接组件.平垫圈
This document specifies, together with EN 14399-1, hardened and tempered plain washers intended for assembly with large series hexagon high-strength
High-strength structural bolting assemblies for preloading - Plain washers
GOST 32484.6-2013 预加载高强度结构螺栓组件. 平倒角垫圈
High-strength structural bolting assemblies for preloading. Plain chamfered washers
SANS 1700-16-9:2004 紧固件．第16部分：垫圈．第9节：高强度结构螺栓用经淬硬和回火的倒角平垫圈
Specifies chamfered, hardened and tempered circular washers intended for assembly with large series hexagon high-strength structural bolts and nuts
Fasteners Part 16: Washers Section 9: Plain washers, chamfered, hardened, and tempered for high-strength structural bolting
JIS B 1186 AMD 1:2007 摩擦夹紧连接件用高强度六角螺栓、六角螺母和平垫圈组件(修改件1)
備考I.のJIS B 0205メートル並目ねじを，JIS B 0205-I 一般用メートルねじ一第1部:基準山形， JIS B 0205-2 一般用メートルねじ一第2部:全体系，JIS B 0205-3一般用メートルねじ一第3部:ねじ部品用に選択したサイズ及びJIS B 0205-4 一般用メートル
Sets of high strength hexagon bolt, hexagon nut and plain washers for friction grip joints (Amendment 1)
KS R ISO 6305-4:2004 铁路构件.交货技术条件.第4部分:鱼尾板和紧固件用的非处理钢螺母和螺栓及高强度螺母和螺栓
이 규격은 이음판을 채우기 위한 미처리 강제 볼트/너트와 고장력 볼트/너트에 대한 제품
Railway components-Technical delivery requirements-Part 4:Untreated steel nuts and bolts and high-strength nuts and bolts for fish-plates and fastenings
KS R ISO 6305-4:2013 铁路构件 交货技术条件 第4部分：鱼尾板和紧固件用的非处理钢螺母和螺栓及高强度螺母和螺栓
Railway components－Technical delivery requirements－Part 4：Untreated steel nuts and bolts and high－strength nuts and bolts for fish－plates and fastenings
编辑：北检院编辑部
