服务热线:400-635-0567

固定的空气压缩机检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

GB 10892-1989 安全规则和操作规程

本标准规定了空气压缩机设计、安装、操作及维护中应遵守的安全规则和操作规程。 本标准适用于一般用固定或撬装的容积式空气压缩机(以下简称压缩机)。 本标准不适用于下列类型的压缩机: a.轴功率小于2kW的压缩机; b.排气压力小于0.05MPa的压缩机; c.排气压

Stationary air compressors--Safety rules and code of practice

GB 10892-2005 安全规则和操作规程

本标准规定了一般用固定或撬装的空气压缩机(以下简称“压缩机”)的设计、安装、操作及维护中应遵守的安全准则和操作规程。 本标准适用于轴功率不小于2kW、额定排气压力为0.05MPa~5MPa的压缩机。 本标准不适用于下列类型的压缩机: a)用于呼吸、潜水、外科手术

Stationary air compressors.Safety rules and code of practice

GB/T 10892-2021 安全规则和操作规程

Stationary air compressors—Safety rules and code of practice

GB/T 10892-2005 安全规则和操作规程

Stationary air compressors-Safety rules and code of practice

GB/T 13279-2002 一般用往复活塞

本标准规定了一般用固定的往复活塞空气压缩机(以下简称空压机)的型式与基本参数、要求、试验方法、检验规则和标志、包装及贮存等要求。 本标准适用于驱动电动机功率为l8.5~560 kW、额定排气压力为0.7~1.25 Mpa的空压机。 额定排气压力小于0.7 Mpa的空压机可参照本标准执行

Stationary reciprocating piston air compressor for general use

JB/T 8867-2000 往复活塞.储

本标准规定了工作压力为0.7,1.0,1.25MPa储气罐的型式、型号、设计参数和尺寸、要求、检验与验收、标志、包装和运输。 本标准适用于GB/T 7787规定的空气压缩机使用的储气罐。 本标准也适用于工作压力相当的其它容积式空气压缩机使用的储气罐

Receiver of stationary reciprocating piston air compressors

JB/T 8867-2015 往复活塞

本标准规定了工作压力为0.7MPa、0.8MPa、1.0MPa、1.25MPa储气罐的型式、型号、设计参数和尺寸、要求、检验与验收、标志、包装和运输。本标准适用于GB/T 13279规定的空气压缩机使用的储气罐。本标准也适用于工作压力相当的其它容积式空气压缩机使用的储气罐

Receiver of stationary reciprocating piston air compressors

GB/T 13279-2015 一般用往复活塞

本标准规定了一般用固定的往复活塞空气压缩机(以下简称“空压机”)的型号与基本参数、要求、试验方法、检验规则和标志、包装及贮存等要求。 本标准适用于驱动电动机功率为18.5 kW~560 kW、额定排气压力为0.7 MPa~1.25 MPa的空压机。 额定排气压力小于0.7 MPa的空压机可参照本

Stationary reciprocating air compressors for general use

AS 4297-1995 地下矿.

Specifies rules for the safe design, construction, installation and operation of air compressors located in underground mines to accommodate

Underground mining - Stationary air compressors

JUS M.F3.150-1984 技术要求

Stationary air compressors. Technical reguirements

BS 6244:1982 实用规程

Establishes standards for the safe design, construction, installation and operation of stationary and skid-mounted air compressors for general use

Code of practice for stationary air compressors

IS 9242-1986

Lays down, a series of preferred pressures to be used when presenting data for compressors. 1.1 Components for compressed air system shall

SIS SS 1949-1984 ,安全规则和守则

I denna standard fastst?lls regler f?r s?ker konstruktion, tillverkning, installation och drift av station?ra samt sl?dramsmonterade luftkompressorer

Stationary air compressors - Safety rules and code of practice

AQ 2055-2016 金属非金属矿山在用安全 检验规范第1部分:

ISO/DIS 18623-1 系统 第1部分:安全要求

Air compressors and compressed air systems — Part 1: Air compressor safety requirements

GB 10892-1989 安全规则和操作规程

本标准规定了空气压缩机设计、安装、操作及维护中应遵守的安全规则和操作规程。 本标准适用于一般用固定或撬装的容积式空气压缩机(以下简称压缩机)。 本标准不适用于下列类型的压缩机: a.轴功率小于2kW的压缩机; b.排气压力小于0.05MPa的压缩机; c.排气压

Stationary air compressors--Safety rules and code of practice

GB 10892-2005 安全规则和操作规程

本标准规定了一般用固定或撬装的空气压缩机(以下简称“压缩机”)的设计、安装、操作及维护中应遵守的安全准则和操作规程。 本标准适用于轴功率不小于2kW、额定排气压力为0.05MPa~5MPa的压缩机。 本标准不适用于下列类型的压缩机: a)用于呼吸、潜水、外科手术

Stationary air compressors.Safety rules and code of practice

GB/T 10892-2021 安全规则和操作规程

Stationary air compressors—Safety rules and code of practice

GB/T 10892-2005 安全规则和操作规程

Stationary air compressors-Safety rules and code of practice

GB/T 13279-2002 一般用往复活塞

本标准规定了一般用固定的往复活塞空气压缩机(以下简称空压机)的型式与基本参数、要求、试验方法、检验规则和标志、包装及贮存等要求。 本标准适用于驱动电动机功率为l8.5~560 kW、额定排气压力为0.7~1.25 Mpa的空压机。 额定排气压力小于0.7 Mpa的空压机可参照本标准执行

Stationary reciprocating piston air compressor for general use

JB/T 8867-2000 往复活塞.储

本标准规定了工作压力为0.7,1.0,1.25MPa储气罐的型式、型号、设计参数和尺寸、要求、检验与验收、标志、包装和运输。 本标准适用于GB/T 7787规定的空气压缩机使用的储气罐。 本标准也适用于工作压力相当的其它容积式空气压缩机使用的储气罐

Receiver of stationary reciprocating piston air compressors

JB/T 8867-2015 往复活塞

本标准规定了工作压力为0.7MPa、0.8MPa、1.0MPa、1.25MPa储气罐的型式、型号、设计参数和尺寸、要求、检验与验收、标志、包装和运输。本标准适用于GB/T 13279规定的空气压缩机使用的储气罐。本标准也适用于工作压力相当的其它容积式空气压缩机使用的储气罐

Receiver of stationary reciprocating piston air compressors

GB/T 13279-2015 一般用往复活塞

本标准规定了一般用固定的往复活塞空气压缩机(以下简称“空压机”)的型号与基本参数、要求、试验方法、检验规则和标志、包装及贮存等要求。 本标准适用于驱动电动机功率为18.5 kW~560 kW、额定排气压力为0.7 MPa~1.25 MPa的空压机。 额定排气压力小于0.7 MPa的空压机可参照本

Stationary reciprocating air compressors for general use

AS 4297-1995 地下矿.

Specifies rules for the safe design, construction, installation and operation of air compressors located in underground mines to accommodate

Underground mining - Stationary air compressors

JUS M.F3.150-1984 技术要求

Stationary air compressors. Technical reguirements

BS 6244:1982 实用规程

Establishes standards for the safe design, construction, installation and operation of stationary and skid-mounted air compressors for general use

Code of practice for stationary air compressors

IS 9242-1986

Lays down, a series of preferred pressures to be used when presenting data for compressors. 1.1 Components for compressed air system shall

SIS SS 1949-1984 ,安全规则和守则

I denna standard fastst?lls regler f?r s?ker konstruktion, tillverkning, installation och drift av station?ra samt sl?dramsmonterade luftkompressorer

Stationary air compressors - Safety rules and code of practice

AQ 2055-2016 金属非金属矿山在用安全 检验规范第1部分:

ISO/DIS 18623-1 系统 第1部分:安全要求

Air compressors and compressed air systems — Part 1: Air compressor safety requirements

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询