支护结构检测

T/SCDA 012-2021 自稳式基坑支护结构技术标准

本技术基坑开挖和配筋垫层施工要求严格；前撑桩、后拉杆作为关键技术，必须进行极限承载力检测

T/SCDA 012-2018 自稳式基坑支护结构技术标准

 砂性土、粉土，注浆压力≤2MPa  黏性土注浆压力≤1MPa 配筋垫层厚度≥200mm 引用参照的标准编号：《建筑桩基技术规范》JGJ 94           

NF P94-270:2009 土工技术设计.挡土结构.加固结构和土钉支护结构

Geotechnical design - Retaining structures - Reinforced and soil nailing structures.

T/CECS 1329-2023 装配式复合土钉墙支护结构技术规程

本规程共分为8章，主要内容包括：总则，术语和符号，基本规定，材料与构件，设计，施工，监测、质量检验与验收，拆除与回收利用

HG/T 20718-2020 基坑减压双排帷幕支护结构设计规范

DB37/T 5223-2022 装配式型钢组合结构基坑支护技术规程

本规程适用于山东省行政区域内一般地质条件下的各类建（构）筑物的基坑支护工程。对湿陷性黄土、膨胀土、盐渍土、液化土、淤泥质土等特殊土基坑工程，应结合当地经验应用本规程

DS/EN 1337-9:1998 结构支座 第9部分：保护

This part of this European Standard deals with the measures to protect structural bearings from the effects of the environment and other external

Structural bearings - Part 9: Protection

LST EN 1337-9-2002 结构支座 第9部分：保护

Structural bearings - Part 9: Protection

DIN EN 12636:1999 混凝土支撑结构防护和维修用产品和系统.试验方法.混凝土粘结性测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the adhesion conrete to concrete; German version EN 12636:1999

DIN EN 12189:1999 混凝土支承结构防护和维修用产品和系统.试验方法.敞开时间测定

The document describes a test method for measuring of the open time of structural bonding agents by use of bonded conrete prisms tested in flexure

Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time; German version EN 12189:1999

DIN EN 1770:1998 混凝土支撑结构防护和维修用产品和系统.试验方法.热膨胀系数测定

The document specifies methods for the measurement of the coefficient of thermal expansion of hardened structural bonding agents. The first method

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion; German version EN 1770:1998

DIN EN 12190:1998 混凝土支承结构防护和维修用产品和系统.检验方法.维修用灰浆抗压强度测定

The document specifies a method for determining the compressive strength of mortars and concretes for structural and non-structural repair, as defined

Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar; German version EN 12190:1998

DIN EN 12188:1999 混凝土支承结构防护和维修用产品和系统.试验方法.通过测定钢板胶粘作用表征结构胶粘剂性能

The document describes a test method for the characterisation of structural polymer based bonding agents for the use in applications such as steel

Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents; German version EN 12188:1999

DIN EN 1542:1999 混凝土支承结构防护和维修用产品和系统.试验方法.通过撕裂试验测量粘附强度

The document is one of a series dealing with products and systems for the protection and repair of concrete structures. It specifies a method

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999

DIN EN 1799:1999 混凝土支承结构防护和维修用产品和系统.检验方法.混凝土表面用胶粘剂合格检验

The document dspcifies methods of testing to measure the suitability of structural bonding agents for application to vertical and horizontal surfaces.

Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface; German version EN 1799:1998

T/SCDA 012-2021 自稳式基坑支护结构技术标准

本技术基坑开挖和配筋垫层施工要求严格；前撑桩、后拉杆作为关键技术，必须进行极限承载力检测

T/SCDA 012-2018 自稳式基坑支护结构技术标准

 砂性土、粉土，注浆压力≤2MPa  黏性土注浆压力≤1MPa 配筋垫层厚度≥200mm 引用参照的标准编号：《建筑桩基技术规范》JGJ 94           

NF P94-270:2009 土工技术设计.挡土结构.加固结构和土钉支护结构

Geotechnical design - Retaining structures - Reinforced and soil nailing structures.

T/CECS 1329-2023 装配式复合土钉墙支护结构技术规程

本规程共分为8章，主要内容包括：总则，术语和符号，基本规定，材料与构件，设计，施工，监测、质量检验与验收，拆除与回收利用

HG/T 20718-2020 基坑减压双排帷幕支护结构设计规范

DB37/T 5223-2022 装配式型钢组合结构基坑支护技术规程

本规程适用于山东省行政区域内一般地质条件下的各类建（构）筑物的基坑支护工程。对湿陷性黄土、膨胀土、盐渍土、液化土、淤泥质土等特殊土基坑工程，应结合当地经验应用本规程

LST EN 1337-9-2002 结构支座 第9部分：保护

Structural bearings - Part 9: Protection

DS/EN 1337-9:1998 结构支座 第9部分：保护

This part of this European Standard deals with the measures to protect structural bearings from the effects of the environment and other external

Structural bearings - Part 9: Protection

DIN EN 12636:1999 混凝土支撑结构防护和维修用产品和系统.试验方法.混凝土粘结性测定

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the adhesion conrete to concrete; German version EN 12636:1999

DIN EN 12189:1999 混凝土支承结构防护和维修用产品和系统.试验方法.敞开时间测定

The document describes a test method for measuring of the open time of structural bonding agents by use of bonded conrete prisms tested in flexure

Products and systems for the protection and repair of concrete structures - Test methods - Determination of open time; German version EN 12189:1999

DIN EN 1770:1998 混凝土支撑结构防护和维修用产品和系统.试验方法.热膨胀系数测定

The document specifies methods for the measurement of the coefficient of thermal expansion of hardened structural bonding agents. The first method

Products and systems for the protection and repair of concrete structures - Test methods - Determination of the coefficient of thermal expansion; German version EN 1770:1998

DIN EN 12190:1998 混凝土支承结构防护和维修用产品和系统.检验方法.维修用灰浆抗压强度测定

The document specifies a method for determining the compressive strength of mortars and concretes for structural and non-structural repair, as defined

Products and systems for the protection and repair of concrete structures - Test methods - Determination of compressive strength of repair mortar; German version EN 12190:1998

DIN EN 12188:1999 混凝土支承结构防护和维修用产品和系统.试验方法.通过测定钢板胶粘作用表征结构胶粘剂性能

The document describes a test method for the characterisation of structural polymer based bonding agents for the use in applications such as steel

Products and systems for the protection and repair of concrete structures - Test methods - Determination of adhesion steel-to-steel for characterisation of structural bonding agents; German version EN 12188:1999

DIN EN 1542:1999 混凝土支承结构防护和维修用产品和系统.试验方法.通过撕裂试验测量粘附强度

The document is one of a series dealing with products and systems for the protection and repair of concrete structures. It specifies a method

Products and systems for the protection and repair of concrete structures - Test methods - Measurement of bond strength by pull-off; German version EN 1542:1999

DIN EN 1799:1999 混凝土支承结构防护和维修用产品和系统.检验方法.混凝土表面用胶粘剂合格检验

The document dspcifies methods of testing to measure the suitability of structural bonding agents for application to vertical and horizontal surfaces.

Products and systems for the protection and repair of concrete structures - Test methods - Tests to measure the suitability of structural bonding agents for application to concrete surface; German version EN 1799:1998