空气末端装置检测

📅 发布时间:2024-05-27 👤 来源:北检院 👁 阅读:

ASHRAE 130-2008 的测试方法

The methods of test in this standard apply to air control devices used in air distribution systems. These devices provide control of air volume

Methods of Testing Air Terminal Units

DS/EN ISO 5135:1999 声学 通过在混响室中测量来确定、阻尼器和阀门噪声的声功率级

This standard establishes general rules for the acoustic testing of air-terminal units, dampers and valves used in air diffusion and air distribution

Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room

LST EN ISO 5135:2002 声学 通过在混响室中测量来确定、阻尼器和阀门噪声的声功率级(ISO 5135:1997)

Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)

ANSI/ASHRAE 130-2016 的实验室测试方法

Laboratory Methods of Testing Air Terminal Units

ASHRAE 130-2016 的实验室测试方法

The methods of test in this standard apply to air control devices used in air distribution systems. These devices provide control of air volume

Laboratory Methods of Testing Air Terminal Units

ASHRAE 195-2013 额定控制的测试方法

Method of Test for Rating Air Terminal Unit Controls

FCR FED H-08-4 VOL 3 SEC II 675.2-1988 带周边翅片管辐射的“E”型控制图 VAV 再热和“F”型控制图 VAV 再热

TYPE "E" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT WITH PERIMETER FIN TUBE RADIATION & TYPE "F" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT

ASHRAE 130-1996 管道额定值的测试方法

Methods of Testing for Rating Ducted Air Terminal Units

ASHRAE DA-07-035-2007 在中使用电子换向电机(ECM)

Use of Electronically Commutated Motors (ECMs) in Air Terminal Units

FCR FED H-08-4 VOL 3 SEC II 675.1-1988 “C”型控制图变风量再加热和“D”型控制图变风量再加热与周边辐射天花板面板

TYPE "C" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT & TYPE "D" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT WITH PERIMETER RADIANT CEILING PANELS

DS/EN 13264:2001 建筑物通风 地板安 结构分类试验

This European Standard specifies structural classifications for floor mounted Air Terminal Devices (ATD's) in respect of their possible applications

Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification

LST EN 13264-2003 建筑物通风 地板安 结构分类试验

Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification

DS/EN 1751:1999 建筑物通风 阻尼器和阀门的动力学测试

This European Standard specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences

Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves

LST EN 1751-2001 建筑物通风 阻尼器和阀门的动力学测试

Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves

DIN EN 1751:2023 建筑物通风 阻尼器和阀门的动力学测试

Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves; German and English version prEN 1751:2023

ASHRAE 130-2008 的测试方法

The methods of test in this standard apply to air control devices used in air distribution systems. These devices provide control of air volume

Methods of Testing Air Terminal Units

DS/EN ISO 5135:1999 声学 通过在混响室中测量来确定、阻尼器和阀门噪声的声功率级

This standard establishes general rules for the acoustic testing of air-terminal units, dampers and valves used in air diffusion and air distribution

Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room

LST EN ISO 5135:2002 声学 通过在混响室中测量来确定、阻尼器和阀门噪声的声功率级(ISO 5135:1997)

Acoustics - Determination of sound power levels of noise from air-terminal devices, air-terminal units, dampers and valves by measurement in a reverberation room (ISO 5135:1997)

ANSI/ASHRAE 130-2016 的实验室测试方法

Laboratory Methods of Testing Air Terminal Units

ASHRAE 130-2016 的实验室测试方法

The methods of test in this standard apply to air control devices used in air distribution systems. These devices provide control of air volume

Laboratory Methods of Testing Air Terminal Units

ASHRAE 195-2013 额定控制的测试方法

Method of Test for Rating Air Terminal Unit Controls

FCR FED H-08-4 VOL 3 SEC II 675.2-1988 带周边翅片管辐射的“E”型控制图 VAV 再热和“F”型控制图 VAV 再热

TYPE "E" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT WITH PERIMETER FIN TUBE RADIATION & TYPE "F" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT

ASHRAE 130-1996 管道额定值的测试方法

Methods of Testing for Rating Ducted Air Terminal Units

ASHRAE DA-07-035-2007 在中使用电子换向电机(ECM)

Use of Electronically Commutated Motors (ECMs) in Air Terminal Units

FCR FED H-08-4 VOL 3 SEC II 675.1-1988 “C”型控制图变风量再加热和“D”型控制图变风量再加热与周边辐射天花板面板

TYPE "C" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT & TYPE "D" AIR TERMINAL UNIT CONTROL DIAGRAM VAV REHEAT WITH PERIMETER RADIANT CEILING PANELS

DS/EN 13264:2001 建筑物通风 地板安 结构分类试验

This European Standard specifies structural classifications for floor mounted Air Terminal Devices (ATD's) in respect of their possible applications

Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification

LST EN 13264-2003 建筑物通风 地板安 结构分类试验

Ventilation for buildings - Floor mounted air terminal devices - Tests for structural classification

DS/EN 1751:1999 建筑物通风 阻尼器和阀门的动力学测试

This European Standard specifies methods for the testing and rating of dampers and valves used in air distribution systems with pressure differences

Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves

LST EN 1751-2001 建筑物通风 阻尼器和阀门的动力学测试

Ventilation for buildings - Air terminal devices - Aerodynamic testing of dampers and valves

DIN EN 1751:2023 建筑物通风 阻尼器和阀门的动力学测试

Ventilation for buildings - Air terminal devices - Aerodynamic testing of damper and valves; German and English version prEN 1751:2023

编辑:北检院编辑部

我们的优势

选择北检院的六大理由

📚

CMA/CNAS 双认证

旗下实验室具备国家认证认可监督管理委员会CMA资质认定及中国合格评定国家认可委员会CNAS实验室认可,检测报告具有国际公信力。

🔬

1000+ 台套先进设备

配备扫描电镜、气质联用仪、电感耦合等离子体质谱仪等国际先进检测仪器,确保数据精准可靠。

🏢

15000+ 平米实验室

拥有规模化专业检测基地,涵盖材料、化工、食品、环境等多个专业实验室,满足多领域检测需求。

👥

资深技术团队

汇聚材料科学、化学分析、环境工程等领域专家,拥有10年+行业经验,提供专业可靠的检测分析服务。

快速响应机制

标准检测周期短至3个工作日,加急服务24小时出具报告,全程一对一工程师跟进,确保高效交付。

🌎

全国服务网络

总部位于北京,山东设立分部,服务覆盖全国,为20万+客户提供便捷的一站式检测解决方案。

荣誉资质

旗下实验室资质荣誉

CMA 检验检测机构资质认定

CMA 检验检测机构资质认定

国家认证认可监督管理委员会颁发,具备向社会出具具有证明作用数据的资质。

CNAS 实验室认可证书

CNAS 实验室认可证书

中国合格评定国家认可委员会认可,检测结果获国际互认,具有国际公信力。

ISO 质量管理体系认证

ISO 质量管理体系认证

通过ISO 质量管理体系认证,管理体系实现规范化、标准化。

绿色低碳诚信示范创建企业

绿色低碳诚信示范创建企业

荣获绿色低碳诚信示范创建企业称号,践行可持续发展理念,推动绿色低碳转型,助力"双碳"目标实现。

北京市创新型中小企业

北京市"创新型"中小企业

经北京市经济和信息化局认定的创新型中小企业,具备较强创新能力与较高专业化水平,是优质中小企业梯度培育体系的重要基础力量。

北京市专精特新中小企业

北京市"专精特新"中小企业

经北京市经济和信息化局认定的专精特新中小企业,具备专业化、精细化、特色化、新颖化发展特征,在细分领域具有较强竞争优势。

查看全部资质

仪器设备

国际先进检测仪器,确保检测数据精准可靠

查看全部设备

检测流程

标准化流程,高效交付

01

需求沟通

客户提交检测需求,技术顾问一对一沟通,明确检测项目与标准。

02

样品寄送

客户按照规范要求寄送样品,实验室确认样品状态与数量。

03

实验检测

专业工程师按照标准方法进行检测分析,全程质量控制。

04

数据审核

检测数据经多级审核,确保结果准确、可靠、可追溯。

05

报告出具

出具检测报告,支持电子版与纸质版,快递送达。

VR实验室720°全景 NEW · 全新上线 VR实验室上线啦! 720°全景实景观览 · 足不出户走进实验室 立即体验 检测咨询 · 立即在线沟通