
发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
Method of test of cement mortar for plastering
本标准适用于依第 2.1 节所规定底层之木造建筑物防火用水泥砂浆粉刷施工方法
Method of Plastering of Cement Mortar for Fire Protection
4.1x00a0;This test method provides a laboratory procedure for determining
Standard Test Method for Rate of Water Absorption of Masonry Mortars
4.1x00a0;This test method provides a laboratory procedure for determining
Standard Test Method for Rate of Water Absorption of Masonry Mortars
前 言 1 范围 2 规范性引用文件 3 术语和定义 4 基本规定 5 材料 5.1 一般规定 5.2 材料性能 6 
本规程适用于氯丁胶乳水泥砂浆和聚丙烯酸酯乳液水泥砂浆防腐蚀工程的设计、施工及验收。 采用其它品种的聚合物水泥砂浆时,应经试验确定
Technical specification for anticorrosion works of polymer cement mortar
——材料; ——施工要求; ——安全与环保; ——质量检验与验收
Specification for epoxy resin mortar of hydraulic structures
DTU 26-1. Building works. Plasterworks made from cement mortars, lime mortars, mixed gypsum and slaked lime mortars. Part 1 : technical specifications.
本规程共分7章和1个附录,主要内容包括:总则、术语、基本规定、材料、施工、质量检测、修补等
本标准规定了水泥混凝土和砂浆用工程纤维试验方法的术语和定义、试验用主要仪器和量具、外观、尺寸、纤维性能,试验数据的修约与比较方法和试验报告。 本标准适用于水泥混凝土和砂浆用的工程纤维,包括合成纤维、耐碱玻璃纤维、玄武岩纤维、钢纤维等,其他纤维可参照执行
Test method for engineering fibers used in cement concrete and mortar
本标准适用于公称直径为150~500mm的钢质管道水泥砂浆衬里风送法现场整体挤涂
Technological process of the pneumatically-pigsqueezed cement mortar lining for steel pipeline
本文件规定了水性聚氨酯水泥复合砂浆地坪系统的设计和施工质量,规范施工工艺流程,制定本规程,适用于新建、改建和扩建的水性聚氨酯水泥复合砂浆地坪工程的设计、施工、质量检验及验收和水性聚氨酯水泥复合砂浆地坪工程的设计、施工及质量检验与验收,除应遵守本规程外,尚应符合现行有关标准的规定
本标准适用于公称直径为400mm以上的钢质管道水泥砂浆衬里涂敷机涂敷的施工
Process of cement mortar lining with coating machine on the inside surface of steel pipes
本标准适用于公称直径100~500mm的钢质管道粉煤灰水泥砂浆衬里离心成型施工,亦适用于水泥砂浆衬里离心成型施工
Technological process of the coal ash cement mortar lining of steel pipeline with centrifugal lining sets
DTU 26-1. Building works. Private contracts. Plasterworks made from cement mortars, lime mortars, mixed gypsum and slaked lime mortars. Part 2 : special clauses.
Method of test of cement mortar for plastering
本标准适用于依第 2.1 节所规定底层之木造建筑物防火用水泥砂浆粉刷施工方法
Method of Plastering of Cement Mortar for Fire Protection
4.1x00a0;This test method provides a laboratory procedure for determining
Standard Test Method for Rate of Water Absorption of Masonry Mortars
4.1x00a0;This test method provides a laboratory procedure for determining
Standard Test Method for Rate of Water Absorption of Masonry Mortars
前 言 1 范围 2 规范性引用文件 3 术语和定义 4 基本规定 5 材料 5.1 一般规定 5.2 材料性能 6 
本规程适用于氯丁胶乳水泥砂浆和聚丙烯酸酯乳液水泥砂浆防腐蚀工程的设计、施工及验收。 采用其它品种的聚合物水泥砂浆时,应经试验确定
Technical specification for anticorrosion works of polymer cement mortar
——材料; ——施工要求; ——安全与环保; ——质量检验与验收
Specification for epoxy resin mortar of hydraulic structures
DTU 26-1. Building works. Plasterworks made from cement mortars, lime mortars, mixed gypsum and slaked lime mortars. Part 1 : technical specifications.
本规程共分7章和1个附录,主要内容包括:总则、术语、基本规定、材料、施工、质量检测、修补等
本标准规定了水泥混凝土和砂浆用工程纤维试验方法的术语和定义、试验用主要仪器和量具、外观、尺寸、纤维性能,试验数据的修约与比较方法和试验报告。 本标准适用于水泥混凝土和砂浆用的工程纤维,包括合成纤维、耐碱玻璃纤维、玄武岩纤维、钢纤维等,其他纤维可参照执行
Test method for engineering fibers used in cement concrete and mortar
本标准适用于公称直径为150~500mm的钢质管道水泥砂浆衬里风送法现场整体挤涂
Technological process of the pneumatically-pigsqueezed cement mortar lining for steel pipeline
本文件规定了水性聚氨酯水泥复合砂浆地坪系统的设计和施工质量,规范施工工艺流程,制定本规程,适用于新建、改建和扩建的水性聚氨酯水泥复合砂浆地坪工程的设计、施工、质量检验及验收和水性聚氨酯水泥复合砂浆地坪工程的设计、施工及质量检验与验收,除应遵守本规程外,尚应符合现行有关标准的规定
本标准适用于公称直径为400mm以上的钢质管道水泥砂浆衬里涂敷机涂敷的施工
Process of cement mortar lining with coating machine on the inside surface of steel pipes
本标准适用于公称直径100~500mm的钢质管道粉煤灰水泥砂浆衬里离心成型施工,亦适用于水泥砂浆衬里离心成型施工
Technological process of the coal ash cement mortar lining of steel pipeline with centrifugal lining sets
DTU 26-1. Building works. Private contracts. Plasterworks made from cement mortars, lime mortars, mixed gypsum and slaked lime mortars. Part 2 : special clauses.








