木塑产品检测

BS DD CEN/TS 15534-3:2007 木塑复合材料(WPS).木塑复合产品特征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used

Wood-plastics composites (WPC) - Characterisation of WPC products

GB/T 35612-2017 绿色产品评价 木塑制品

Green product assessment—Wood plastic composites products

T/CPPIA 7-2021 塑木制品生产企业环保技术规范

4.1　塑木制品生产企业应符合国家和地方有关环境法律法规、标准及技术规范等要求运行废气、废水污染防治设施，维护和管理保证设施正常运行，废水、废气污染物排放达到国家和地方排放标准、总量控制和排污许可证管理要求，按照《固定污染源排污许可分类管理名录》（2019版）和HJ 1122的规定，实行

Technical specification for environmental protection of production in wood-plastic composite enterprises

HJ 2540-2015 环境标志产品技术要求 木塑制品

本标准规定了木塑制品环境标志产品的术语和定义、基本要求、技术内容和检验方法。本标准适用于除与食品药品接触的产品及儿童玩具制品外各类木塑制品

Technical requirement for environmental labeling products.Wood plastic composites products

DIN CEN/TS 15534-3:2007 木塑复合材料(WPS).第3部分:木塑复合材料产品的特征

Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products; German version CEN/TS 15534-3:2007

ASTM D7031-11 木塑复合材料产品物理力学性能评价指导

WPCs are intended for use in both structural and non-structural applications. The test methods described within are intended to address products

Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

GB/T 29418-2012 塑木复合材料产品物理力学性能测试

本标准规定了塑木复合材料产品的弯曲、压缩、剪切强度、蠕变性能试验、握钉力、落锤冲击、密度、含水率、防滑性、耐磨性、线性热膨胀系数、吸水性、吸水厚度膨胀、耐冻融性、试验方法。本标准适用于塑木复合材料产品,包括横截面为实心或空心、新料或回收料制成、结构用或非结构用产品的试验方法

Test methods for mechanical and physical properties of wood-plastic composite product

BS DD CEN/TS 15534-1:2007 木塑复合材料(WPS).木塑复合材料和产品特征试验方法

This Technical Specification specifies test methods and their relevant parameters and test conditions to be used in determining selected properties

Wood-plastics composites (WPC) - Test methods for characterisation of WPC materials and products

T/CPPIA 8-2021 塑木制品企业安全生产技术规范

塑木企业采用“策划、实施、检查、改进”的“PDCA”动态循环模式，依据本标准的规定，结合塑木制品生产经营特点，自主建立并保持安全生产规范化管理体系；通过自我检查、自我纠正和自我完善的企业自评方式，构建安全生产长效机制，持续提升安全生产绩效

Specification of safety production technology in wood-plastic composite enterprises

ASTM D7031-04 木材-塑料复合产品的机械和物理性能的评估标准指南

WPCs are intended for use in both structural and non-structural applications. The test methods described within are intended

Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

DIN CEN/TS 15534-1:2007 木塑复合材料(WPS).第1部分:木塑复合材料和产品特征的试验方法

Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products; German version CEN/TS 15534-1:2007

T/CAB 0011-2016 绿色设计产品评价技术规范 木塑型材

本标准规定了木塑型材绿色设计产品的评价要求、生命周期评价报告编制方法和评价方法

Technical specification for green-design product assessment - wood plastic composite profile

DS/CEN/TS 15534-3:2007 木塑复合材料（WPC） 第3部分：WPC 产品的表征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used

Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products

PD CEN/TS 15534-3-2007 木塑复合材料（WPC） 第3部分：WPC 产品的表征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used

Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products

ASTM D6109-19 增强和增强塑料木材及相关产品弯曲性能的标准试验方法

Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

BS DD CEN/TS 15534-3:2007 木塑复合材料(WPS).木塑复合产品特征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used

Wood-plastics composites (WPC) - Characterisation of WPC products

GB/T 35612-2017 绿色产品评价 木塑制品

Green product assessment—Wood plastic composites products

T/CPPIA 7-2021 塑木制品生产企业环保技术规范

4.1　塑木制品生产企业应符合国家和地方有关环境法律法规、标准及技术规范等要求运行废气、废水污染防治设施，维护和管理保证设施正常运行，废水、废气污染物排放达到国家和地方排放标准、总量控制和排污许可证管理要求，按照《固定污染源排污许可分类管理名录》（2019版）和HJ 1122的规定，实行

Technical specification for environmental protection of production in wood-plastic composite enterprises

HJ 2540-2015 环境标志产品技术要求 木塑制品

本标准规定了木塑制品环境标志产品的术语和定义、基本要求、技术内容和检验方法。本标准适用于除与食品药品接触的产品及儿童玩具制品外各类木塑制品

Technical requirement for environmental labeling products.Wood plastic composites products

DIN CEN/TS 15534-3:2007 木塑复合材料(WPS).第3部分:木塑复合材料产品的特征

Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products; German version CEN/TS 15534-3:2007

ASTM D7031-11 木塑复合材料产品物理力学性能评价指导

WPCs are intended for use in both structural and non-structural applications. The test methods described within are intended to address products

Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

GB/T 29418-2012 塑木复合材料产品物理力学性能测试

本标准规定了塑木复合材料产品的弯曲、压缩、剪切强度、蠕变性能试验、握钉力、落锤冲击、密度、含水率、防滑性、耐磨性、线性热膨胀系数、吸水性、吸水厚度膨胀、耐冻融性、试验方法。本标准适用于塑木复合材料产品,包括横截面为实心或空心、新料或回收料制成、结构用或非结构用产品的试验方法

Test methods for mechanical and physical properties of wood-plastic composite product

BS DD CEN/TS 15534-1:2007 木塑复合材料(WPS).木塑复合材料和产品特征试验方法

This Technical Specification specifies test methods and their relevant parameters and test conditions to be used in determining selected properties

Wood-plastics composites (WPC) - Test methods for characterisation of WPC materials and products

T/CPPIA 8-2021 塑木制品企业安全生产技术规范

塑木企业采用“策划、实施、检查、改进”的“PDCA”动态循环模式，依据本标准的规定，结合塑木制品生产经营特点，自主建立并保持安全生产规范化管理体系；通过自我检查、自我纠正和自我完善的企业自评方式，构建安全生产长效机制，持续提升安全生产绩效

Specification of safety production technology in wood-plastic composite enterprises

ASTM D7031-04 木材-塑料复合产品的机械和物理性能的评估标准指南

WPCs are intended for use in both structural and non-structural applications. The test methods described within are intended

Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products

DIN CEN/TS 15534-1:2007 木塑复合材料(WPS).第1部分:木塑复合材料和产品特征的试验方法

Wood-plastics composites (WPC) - Part 1: Test methods for characterisation of WPC materials and products; German version CEN/TS 15534-1:2007

T/CAB 0011-2016 绿色设计产品评价技术规范 木塑型材

本标准规定了木塑型材绿色设计产品的评价要求、生命周期评价报告编制方法和评价方法

Technical specification for green-design product assessment - wood plastic composite profile

DS/CEN/TS 15534-3:2007 木塑复合材料（WPC） 第3部分：WPC 产品的表征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used

Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products

PD CEN/TS 15534-3-2007 木塑复合材料（WPC） 第3部分：WPC 产品的表征

This Technical Specification identifies the required and optional properties of wood-plastics composite (WPC) products. It is intended to be used

Wood-plastics composites (WPC) - Part 3: Characterisation of WPC products

ASTM D6109-19 增强和增强塑料木材及相关产品弯曲性能的标准试验方法

Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products