发布时间:2023-06-12 09:51:42
点击量:0
本标准规定了一般用往复活塞空气压缩机(以下简称空压机)主要零部件的术语、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于驱动功率为0.18kW~560kW、额定排气压力不超过1.4MPa的空压机主要零部件
Reciprocating piston air compressor for general use.Main components.Specifications
本标准规定了一般用往复活塞空气压缩机(以下简称空压机)主要零部件的术语和定义、要求、试验方法和检验规则、标志、包装、运输和贮存。 本标准适用于驱动功率为0.18 kW~560 kW、额定排气压力不超过1.4 MPa的空压机的主要零部件
Reciprocating air compressor for general use.Main components.Specifications
This amendment forms a part of MIL-D-70430(AR), dated 12 September 1983, and is approved for use by the U.S. Army Armament Research, Development
DECELERATOR, RAM AIR, PARTS AND CONTAINER ASSEMBLY
This specifi,cation contains requirements and provides quality assurance provisionsf or the fabrication of parts and the manufacture, assembly
DECELERATOR, RAM AIR, PARTS AND CONTAINER ASSEMBLY
JB/T 8009.3-1999 本标准是对 JB/T 8009.3-95《机床夹具零件及部件 圆压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了外径为 20~60mm 的圆压块。 本标准于 1981 年以 GB 2173-80
The parts and units of jigs and fixtures.Round holddown
JB/T 8010.9-1999 本标准是对 JB/T 8010.9-95《机床夹具零件及部件 平压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M36 的平压板。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Flat clamp plate
JB/T 8010.13-1999 本标准是对 JB/T 8010.13-95《机床夹具零件及部件 直压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M8~M20 的直压板。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Straight clamp plate
Die casting machines; parts, terminologyMachines à couler sous pression; éléments de machine, terminologieDie Norm enth?lt Begriffe von
Die casting machines; parts, terminology
JB/T 8009.1-1999 本标准是对 JB/T 8009.1-95《机床夹具零件及部件 光面压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M4~M24 的光面压块。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Smooth face clamp plate
JB/T 8009.2-1999 本标准是对 JB/T 8009.2-95《机床夹具零件及部件 槽面压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M24 的槽面压块。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Groove face clamp plate
JB/T 8026.2-1999 本标准是对 JB/T 8026.2-95《机床夹具零件及部件 顶压支承》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了梯形螺纹规格为 Tr16×4左~Tr36×6左 的顶压支承。 本标准于
The parts and units of jigs and fixtures.Adjustble supporting bolta
JB/T 8009.4-1999 本标准是对 JB/T 8009.4-95《机床夹具零件及部件 光面压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了长为 32~125mm、宽为 10~20mm 的弧形压块。 本标准于 1981
The parts and units of jigs and fixtures.Curve holddown
JB/T 8010.1-1999 本标准是对 JB/T 8010.1-95《机床夹具零件及部件 移动压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M36 的移动压板。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Moving clamp plate
本标准规定了一般用往复活塞空气压缩机(以下简称空压机)主要零部件的术语、要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于驱动功率为0.18kW~560kW、额定排气压力不超过1.4MPa的空压机主要零部件
Reciprocating piston air compressor for general use.Main components.Specifications
本标准规定了一般用往复活塞空气压缩机(以下简称空压机)主要零部件的术语和定义、要求、试验方法和检验规则、标志、包装、运输和贮存。 本标准适用于驱动功率为0.18 kW~560 kW、额定排气压力不超过1.4 MPa的空压机的主要零部件
Reciprocating air compressor for general use.Main components.Specifications
This amendment forms a part of MIL-D-70430(AR), dated 12 September 1983, and is approved for use by the U.S. Army Armament Research, Development
DECELERATOR, RAM AIR, PARTS AND CONTAINER ASSEMBLY
This specifi,cation contains requirements and provides quality assurance provisionsf or the fabrication of parts and the manufacture, assembly
DECELERATOR, RAM AIR, PARTS AND CONTAINER ASSEMBLY
JB/T 8009.3-1999 本标准是对 JB/T 8009.3-95《机床夹具零件及部件 圆压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了外径为 20~60mm 的圆压块。 本标准于 1981 年以 GB 2173-80
The parts and units of jigs and fixtures.Round holddown
JB/T 8010.9-1999 本标准是对 JB/T 8010.9-95《机床夹具零件及部件 平压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M36 的平压板。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Flat clamp plate
JB/T 8010.13-1999 本标准是对 JB/T 8010.13-95《机床夹具零件及部件 直压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M8~M20 的直压板。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Straight clamp plate
Die casting machines; parts, terminologyMachines à couler sous pression; éléments de machine, terminologieDie Norm enth?lt Begriffe von
Die casting machines; parts, terminology
JB/T 8009.1-1999 本标准是对 JB/T 8009.1-95《机床夹具零件及部件 光面压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M4~M24 的光面压块。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Smooth face clamp plate
JB/T 8009.2-1999 本标准是对 JB/T 8009.2-95《机床夹具零件及部件 槽面压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M24 的槽面压块。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Groove face clamp plate
JB/T 8026.2-1999 本标准是对 JB/T 8026.2-95《机床夹具零件及部件 顶压支承》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了梯形螺纹规格为 Tr16×4左~Tr36×6左 的顶压支承。 本标准于
The parts and units of jigs and fixtures.Adjustble supporting bolta
JB/T 8009.4-1999 本标准是对 JB/T 8009.4-95《机床夹具零件及部件 光面压块》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了长为 32~125mm、宽为 10~20mm 的弧形压块。 本标准于 1981
The parts and units of jigs and fixtures.Curve holddown
JB/T 8010.1-1999 本标准是对 JB/T 8010.1-95《机床夹具零件及部件 移动压板》的修订,修订时仅按有关规定作了编辑性修改,技术内容没有改变。 本标准规定了适用于螺纹规格为 M6~M36 的移动压板。 本标准于 1981 年以 GB
The parts and units of jigs and fixtures.Moving clamp plate