压力用聚氯乙烯（PVC）管材管件检测

AS/NZS 1477-2006 耐压聚氯乙烯(PVC)管和管件

Specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct

PVC pipes and fittings for pressure applications

AS/NZS 4765-2007 压力器具用改进聚氯乙烯PVC(PVC-M)管

Specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure

Modified PVC (PVC-M) pipes for pressure applications

KS M 3402-2021 压力应用用未增塑聚氯乙烯（PVC-U）管件

Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for pressure applications

KS M 3410-2021 非压力应用用未增塑聚氯乙烯（PVC-U）管件

Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for nonpressure application

GB/T 41422-2022 压力输水用取向硬聚氯乙烯(PVC-O)管材和连接件

Oriented unplasticized poly(vinyl chloride)(PVC-O) pipes and joints for the conveyance of water under pressure

ISO 2536:1974 公制系列、硬聚氯乙烯(PVC)压力管材和管件 法兰尺寸

Gives the principal dimensions of loose backing flanges for use with solvent-welded flange adaptors. Applies to flanges for pipe sizes from 16 to 315

Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series; Dimensions of flanges

KS M 3401-2021 压力应用用未增塑聚氯乙烯（PVC-U）管

Unplasticized poly(vinyl chloride) (PVC-U) pipes for pressure applications

TCVN 6147-2-2003 热塑性管材和管件.维卡软化温度.第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

Thermoplastics pipes and fittings.Vicat softening temperature.Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC.C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC.HI

EN ISO 2507-2:2017 热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (P

ISO 2507-2:1995 热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

Specifies the particular test conditions for determining the Vicat softening temperature of PVC-U and PVC-C pipes and fittings as well as PVC-HI pipes

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PV

KS M ISO 2507-2:2005 热塑性塑料管材和管件.维卡软化温度.第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

이 규격은 무가소화 폴리염화비닐(PVC-U) 또는 염소화 폴리염화비닐(PVC-C) 관 및

Thermoplastics pipes and fittings－Vicat softening temperature ? Part 2：Test conditions for unplasticized poly(vinyl chloride)(PVC－U) or chlorinated poly(vinyl chloride)(PVC－C) pipes and fittings for high impact resistance poly(vinyl chloride)(PVC－HI) pipe

GB/T 10002.1-1996 给水用硬聚氯乙烯（PVC-U）管材

本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的给水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于建筑物内外（架空或埋地）给水用管材。 本标准规定的管材适用于压力下输送温度不超过45C的水，包括一般用途和

Unplasticized polyvinyl chloride (PVC-U) pipe for water supply

GB/T 10002.1-2006 给水用硬聚氯乙烯(PVC-U)管材

GB/T 10002的本部分规定了以聚氯乙烯树脂为主要原料，经挤出成型的给水用硬聚氯乙烯管材(以下简称管材)的材料、产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于建筑物内或室外埋地给水用硬聚氯乙烯管材。与GB/T 10002.2-2003《给水用硬

Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply

GB/T 4219-1996 化工用硬聚氯乙烯(PVC-U)管材

本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的化工用硬聚氯乙烯管材（以下简称管材）的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于输送温度在45℃以下某些腐蚀性化学流体的管材，对不宜输送的某些流体见 附录A。也可用于输送非饮用水等压力流体

Unplasticized polyvinyl chloride (PVC-U) pipes for chemical industry

CJ/T 308-2009 水井用硬聚氯乙烯(PVC-U)管材

本标准规定了d_n110 mm~d_n630 mm带有波形螺纹的硬聚氯乙烯(PVC-U)井壁管和过滤管(以下简称"井管")的材料、要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于水温不高于55℃的生活给水、灌溉用水、浅层地能开发等水文水井用硬聚氯乙烯(PVC-U)管材

Unplasticized polyvinyl chloride (PVC-U) water well filter pipes

AS/NZS 1477-2006 耐压聚氯乙烯(PVC)管和管件

Specifies requirements for PVC pipes and fittings for pressure applications for use below ground or above ground, where they are not exposed to direct

PVC pipes and fittings for pressure applications

AS/NZS 4765-2007 压力器具用改进聚氯乙烯PVC(PVC-M)管

Specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure

Modified PVC (PVC-M) pipes for pressure applications

KS M 3402-2021 压力应用用未增塑聚氯乙烯（PVC-U）管件

Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for pressure applications

KS M 3410-2021 非压力应用用未增塑聚氯乙烯（PVC-U）管件

Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for nonpressure application

GB/T 41422-2022 压力输水用取向硬聚氯乙烯(PVC-O)管材和连接件

Oriented unplasticized poly(vinyl chloride)(PVC-O) pipes and joints for the conveyance of water under pressure

ISO 2536:1974 公制系列、硬聚氯乙烯(PVC)压力管材和管件 法兰尺寸

Gives the principal dimensions of loose backing flanges for use with solvent-welded flange adaptors. Applies to flanges for pipe sizes from 16 to 315

Unplasticized polyvinyl chloride (PVC) pressure pipes and fittings, metric series; Dimensions of flanges

KS M 3401-2021 压力应用用未增塑聚氯乙烯（PVC-U）管

Unplasticized poly(vinyl chloride) (PVC-U) pipes for pressure applications

TCVN 6147-2-2003 热塑性管材和管件.维卡软化温度.第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

Thermoplastics pipes and fittings.Vicat softening temperature.Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC.C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PVC.HI

EN ISO 2507-2:2017 热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly (vinyl chloride) (P

ISO 2507-2:1995 热塑性塑料管材和管件 维卡软化温度 第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

Specifies the particular test conditions for determining the Vicat softening temperature of PVC-U and PVC-C pipes and fittings as well as PVC-HI pipes

Thermoplastics pipes and fittings - Vicat softening temperature - Part 2: Test conditions for unplasticized poly(vinyl chloride) (PVC-U) or chlorinated poly(vinyl chloride) (PVC-C) pipes and fittings and for high impact resistance poly(vinyl chloride) (PV

KS M ISO 2507-2:2005 热塑性塑料管材和管件.维卡软化温度.第2部分:硬聚氯乙烯(PVC-V)或氯化聚氯乙烯(PVC-C)管材及管件和高抗冲聚氯乙烯(PVC-HI)管材的试验条件

이 규격은 무가소화 폴리염화비닐(PVC-U) 또는 염소화 폴리염화비닐(PVC-C) 관 및

Thermoplastics pipes and fittings－Vicat softening temperature ? Part 2：Test conditions for unplasticized poly(vinyl chloride)(PVC－U) or chlorinated poly(vinyl chloride)(PVC－C) pipes and fittings for high impact resistance poly(vinyl chloride)(PVC－HI) pipe

GB/T 10002.1-1996 给水用硬聚氯乙烯（PVC-U）管材

本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的给水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于建筑物内外（架空或埋地）给水用管材。 本标准规定的管材适用于压力下输送温度不超过45C的水，包括一般用途和

Unplasticized polyvinyl chloride (PVC-U) pipe for water supply

GB/T 10002.1-2006 给水用硬聚氯乙烯(PVC-U)管材

GB/T 10002的本部分规定了以聚氯乙烯树脂为主要原料，经挤出成型的给水用硬聚氯乙烯管材(以下简称管材)的材料、产品分类、技术要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于建筑物内或室外埋地给水用硬聚氯乙烯管材。与GB/T 10002.2-2003《给水用硬

Unplasticized poly (vinyl chloride) (PVC-U) pipes for water supply

GB/T 4219-1996 化工用硬聚氯乙烯(PVC-U)管材

本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的化工用硬聚氯乙烯管材（以下简称管材）的产品分类、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于输送温度在45℃以下某些腐蚀性化学流体的管材，对不宜输送的某些流体见 附录A。也可用于输送非饮用水等压力流体

Unplasticized polyvinyl chloride (PVC-U) pipes for chemical industry

CJ/T 308-2009 水井用硬聚氯乙烯(PVC-U)管材

本标准规定了d_n110 mm~d_n630 mm带有波形螺纹的硬聚氯乙烯(PVC-U)井壁管和过滤管(以下简称"井管")的材料、要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于水温不高于55℃的生活给水、灌溉用水、浅层地能开发等水文水井用硬聚氯乙烯(PVC-U)管材

Unplasticized polyvinyl chloride (PVC-U) water well filter pipes