无压埋地排水排污用热塑性塑料外壁光滑的A型管材管件检测

EN ISO 13262:2017 压地下排水排污用热塑性塑料管道系统.热塑性塑料螺旋状结构壁管道.接缝抗拉强度测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam

ISO 13262:2010 压地下排水排污用热塑性塑料管道系统.热塑性塑料螺旋状结构壁管道.接缝抗拉强度测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam

EN ISO 13263:2017 压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法

ISO 13263:2010 specifies a method for testing the impact resistance of fittings by dropping them on to a rigid surface. For a fitting

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)

ISO 13263:2010 压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法

This International Standard specifies a method for testing the impact resistance of fittings by dropping them on to a rigid surface. For a fitting

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength

BS ISO 13263:2010 压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength

T/ZZB 2570-2021 埋地排水排污用聚丙烯（PP）缠绕结构壁管材

本文件规定了埋地排水排污用聚丙烯（PP）缠绕结构壁管材的术语和定义、符号和缩略语、基本要求、管材分类、结构型式和连接方式、技术要求、检验方法、检验规则、标志、运输和贮存、质量承诺。 本文件适用于以聚丙烯（PP）树脂为主要原料，以聚合物材料（一般为聚丙烯）作为辅助支撑结构，采用缠绕成型，经加工制成的

Polypropylene (PP) spirally enwound structural-wall pipes for underground drainage and sewerage

NF T54-927*NF EN ISO 13263:2017 压地下排水和污水处理用热塑性塑料管道系统 热塑性塑料管件 冲击强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength

GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材

本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式

Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems

ISO 8772:2006 高压埋地污废水排放用塑料管道系统.聚乙烯管材(PE)

This International Standard specifies the requirements for polyethylene (PE) pipes, fittings and piping systems intended for use for non-pressure

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)

ISO 13267:2010 压地下排水排污用热塑性塑料管道系统.热塑性塑料检查井和检修孔.抗弯性试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

BS ISO 13267:2010 压地下排水排污用热塑性塑料管道系统.热塑性塑料检查井和检修孔.抗弯性试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

NF T54-925*NF EN ISO 13262:2017 非压力地下排水和污水处理用热塑性塑料管道系统 热塑性塑料螺旋成型结构壁管 接缝抗拉强度的测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam

DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材

本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm³，改为≤1.6g

DIN EN ISO 13263:2018 压地下排水和污水处理用热塑性塑料管道系统 热塑性塑料管件 冲击强度试验方法（ISO 13263:2010）

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)

T/CPPIA 3-2020 埋地排水排污用抗冲改性聚氯乙烯（PVC-M）双壁波纹管材

8.1　颜色 管材内外层应色泽均匀，颜色一般为蓝色，其他颜色可由供需双方协商确定。 8.2　外观 8.2.1　管材内外壁不允许有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材端面应平整并与轴线垂直。 8.2.2　管材波谷区内外壁应紧密熔接，不应出现脱开现象。 8.3

Modified impact resistance poly (vinyl chloride) (PVC-M) double wall corrugated pipes for underground soil waste and drainage

EN ISO 13262:2017 压地下排水排污用热塑性塑料管道系统.热塑性塑料螺旋状结构壁管道.接缝抗拉强度测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam

ISO 13262:2010 压地下排水排污用热塑性塑料管道系统.热塑性塑料螺旋状结构壁管道.接缝抗拉强度测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam

EN ISO 13263:2017 压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法

ISO 13263:2010 specifies a method for testing the impact resistance of fittings by dropping them on to a rigid surface. For a fitting

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)

ISO 13263:2010 压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法

This International Standard specifies a method for testing the impact resistance of fittings by dropping them on to a rigid surface. For a fitting

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength

BS ISO 13263:2010 压地下排水和排污用热塑性塑料管道系统.热塑性塑料配件.抗冲强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength

T/ZZB 2570-2021 埋地排水排污用聚丙烯（PP）缠绕结构壁管材

本文件规定了埋地排水排污用聚丙烯（PP）缠绕结构壁管材的术语和定义、符号和缩略语、基本要求、管材分类、结构型式和连接方式、技术要求、检验方法、检验规则、标志、运输和贮存、质量承诺。 本文件适用于以聚丙烯（PP）树脂为主要原料，以聚合物材料（一般为聚丙烯）作为辅助支撑结构，采用缠绕成型，经加工制成的

Polypropylene (PP) spirally enwound structural-wall pipes for underground drainage and sewerage

NF T54-927*NF EN ISO 13263:2017 压地下排水和污水处理用热塑性塑料管道系统 热塑性塑料管件 冲击强度试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength

GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材

本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式

Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems

ISO 8772:2006 高压埋地污废水排放用塑料管道系统.聚乙烯管材(PE)

This International Standard specifies the requirements for polyethylene (PE) pipes, fittings and piping systems intended for use for non-pressure

Plastics piping systems for non-pressure underground drainage and sewerage - Polyethylene (PE)

ISO 13267:2010 压地下排水排污用热塑性塑料管道系统.热塑性塑料检查井和检修孔.抗弯性试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

BS ISO 13267:2010 压地下排水排污用热塑性塑料管道系统.热塑性塑料检查井和检修孔.抗弯性试验方法

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics inspection chamber and manhole bases - Test methods for buckling resistance

NF T54-925*NF EN ISO 13262:2017 非压力地下排水和污水处理用热塑性塑料管道系统 热塑性塑料螺旋成型结构壁管 接缝抗拉强度的测定

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics spirally-formed structured-wall pipes - Determination of the tensile strength of a seam

DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材

本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm³，改为≤1.6g

DIN EN ISO 13263:2018 压地下排水和污水处理用热塑性塑料管道系统 热塑性塑料管件 冲击强度试验方法（ISO 13263:2010）

Thermoplastics piping systems for non-pressure underground drainage and sewerage - Thermoplastics fittings - Test method for impact strength (ISO 13263:2010)

T/CPPIA 3-2020 埋地排水排污用抗冲改性聚氯乙烯（PVC-M）双壁波纹管材

8.1　颜色 管材内外层应色泽均匀，颜色一般为蓝色，其他颜色可由供需双方协商确定。 8.2　外观 8.2.1　管材内外壁不允许有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材端面应平整并与轴线垂直。 8.2.2　管材波谷区内外壁应紧密熔接，不应出现脱开现象。 8.3

Modified impact resistance poly (vinyl chloride) (PVC-M) double wall corrugated pipes for underground soil waste and drainage