排水、排污、通风用PVC- U管材管件检测

GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材

本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式

Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems

DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材

本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm³，改为≤1.6g

GB/T 10002.3-1996 埋地排污、废水用硬聚氯乙烯（PVC-U）管材

本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排污、废水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从110～630mm的弹性密封圈连接和外径从110～200mm的粘接式连接的埋地排污、废水用管材。在考虑

Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systems

ANSI/ASTM D2665:2012 聚氯乙烯(氯乙烯)(PVC)排水管,排污管和通风管及配件规格

Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04ae1 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04ae2 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-02 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-02ae1 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-07 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

T/ZZB 0766-2018 建筑排水用硬聚氯乙烯（PVC-U）管材

本标准规定了建筑排水用硬聚氯乙烯(PVC-U)管材（以下简称“管材”）的术语、定义和符号、产品分类、基本要求、技术要求、试验方法、检验规则、标志、运输和贮存、质量承诺。 本标准适用于以聚氯乙烯(PVC)树脂为主要原料，经挤出成型的建筑物内排水系统用铅管材。 本标准规定的管材与T

Unplasticized poly(vinyl chloride)(PVC-U) pipes for soil and waste discharge inside buildings

GB/T 5836.1-2006 建筑排水用硬聚氯乙烯(PVC-U)管材

GB/T 5836的本部分规定了以聚氯乙烯(PVC)树脂为主要原料，经挤出成型的硬聚氯乙烯(PVC-U)管材(以下简称管材)的材料、产品分类、要求、试验方法、检验规则和标志、运输及贮存。 本部分适用于建筑物内排水用管材。在考虑材料的耐化学性和耐热性的条件下，也可用于工业排水用管材

Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings

GB/T 5836.1-2018 建筑排水用硬聚氯乙烯(PVC-U)管材

Unplasticized poly(vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings

GB/T 5836.2-2018 建筑排水用硬聚氯乙烯(PVC-U)管件

Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste discharge inside buildings

GB/T 20221-2006 压埋地排污、排水用硬聚氯乙烯(PVC-U)管材

本标准规定了以聚氯乙烯树脂为主要原料、经挤出成型的压埋地排污、排水用硬聚氯乙烯（PVC-U）管材（以下简称“管材”）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从（110～1000）mm的弹性密封圈连接和外径从（110～200）mm的粘接式

Unplatsticized poly (Vinyl chloride)(PVC-U) pipes for non-pressure buried drainage and sewerage systems

DB13/T 950-2008 再生硬聚氯乙烯（PVC-U）压埋地排污、排水用管材

本标准参考GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》制定。 本标准与GB/T 20221-2006《压埋地排污、排水用硬聚氯乙烯(PVC-U)管材》主要技术变化 — 密度由≤1.55g/cm³，改为≤1.6g

GB/T 10002.3-1996 埋地排污、废水用硬聚氯乙烯（PVC-U）管材

本标准规定了以聚氯乙烯树脂为主要原料，经挤出成型的埋地排污、废水用硬聚氯乙烯管材（以下简称管材）的材料、产品分类、技术要求、试验方法、检验规则、标志、运输、贮存。 本标准适用于外径从110～630mm的弹性密封圈连接和外径从110～200mm的粘接式连接的埋地排污、废水用管材。在考虑

Unplasticized polyvinyl chloride (PVC-U) pipes for buried drainage and sewerage systems

ANSI/ASTM D2665:2012 聚氯乙烯(氯乙烯)(PVC)排水管,排污管和通风管及配件规格

Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04ae1 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04ae2 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-04 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-02 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-02ae1 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

ASTM D2665-07 聚氯乙烯(PVC)塑料排水管、排污管和通风管及管件的标准规范

1.1 This specification covers requirements and test methods for materials, dimensions and tolerances, pipe stiffness, crush resistance, impact

Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

T/ZZB 0766-2018 建筑排水用硬聚氯乙烯（PVC-U）管材

本标准规定了建筑排水用硬聚氯乙烯(PVC-U)管材（以下简称“管材”）的术语、定义和符号、产品分类、基本要求、技术要求、试验方法、检验规则、标志、运输和贮存、质量承诺。 本标准适用于以聚氯乙烯(PVC)树脂为主要原料，经挤出成型的建筑物内排水系统用铅管材。 本标准规定的管材与T

Unplasticized poly(vinyl chloride)(PVC-U) pipes for soil and waste discharge inside buildings

GB/T 5836.1-2006 建筑排水用硬聚氯乙烯(PVC-U)管材

GB/T 5836的本部分规定了以聚氯乙烯(PVC)树脂为主要原料，经挤出成型的硬聚氯乙烯(PVC-U)管材(以下简称管材)的材料、产品分类、要求、试验方法、检验规则和标志、运输及贮存。 本部分适用于建筑物内排水用管材。在考虑材料的耐化学性和耐热性的条件下，也可用于工业排水用管材

Unplasticized poly (vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings

GB/T 5836.1-2018 建筑排水用硬聚氯乙烯(PVC-U)管材

Unplasticized poly(vinyl chloride) (PVC-U) pipes for soil and waste discharge inside buildings

GB/T 5836.2-2018 建筑排水用硬聚氯乙烯(PVC-U)管件

Unplasticized poly(vinyl chloride) (PVC-U) fittings for soil and waste discharge inside buildings