压力用改性聚氯乙烯（PVC-M）管材检测

AS/NZS 4765(Int)/AMD 1-2002 用于压力应用的改性聚氯乙烯（PVC-M）管材；修正案一

Modified PVC (PVC-M) pipes for pressure applications; Amendment No.1

AS/NZS 4765-2007 压力器具用改进聚氯乙烯PVC(PVC-M)管

Specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure

Modified PVC (PVC-M) pipes for pressure applications

CJ/T 272-2008 给水用抗冲改性聚氯乙烯(PVC-M)管材及管件

本标准规定了给水用抗冲改性聚氯乙烯（PVC-M）管材及管件的材料、产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于以聚氯乙烯树脂为主要原料，通过物理改性经挤出成型的管材和注塑成型的管件。 本标准规定的管材与管件适用于压力下输送生活饮用水和一般用途水，水温不超过 45

Modified poly vinyl chloride (PVC-M) pipes and fittings for water supply

GB/T 32018.1-2015 给水用抗冲改性聚氯乙烯(PVC-M)管道系统 第1部分:管材

GB/T 32018的本部分规定了给水用抗冲改性聚氯乙烯(PVC-M)管材的材料、产品分类及等级规格、要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于以聚氯乙烯树脂为主要原料，经共混改性挤出成型的给水用抗冲改性聚氯乙烯(PVC-M)管道系统用管材（以下简称“管材”）。 本部分规定

Modified impact resistance poly (vinyl chloride) (PVC-M) pipe system for water supply.Part 1:Pipes

SANS 966-2:2006 压力管道系统标准．第2部分：改性聚氯乙烯（PVC－M）压力管道系统

This part of SANS 966 specifies requirements for modified polyvinyl chloride) (PVC-M) pipes (with integral joints that incorporate rubber sealing

Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems

SANS 966-2:2008 压力管道系统组件.第2部分:改性(聚)氯乙烯(PVC-M)压力管道系统

Specifies requirements for modified poly(vinyl chloride) (PVC-M)pipes (with integral joints that incorporate rubber sealing rings)and fittings

Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems

DB62/T 4135-2020 抗冲改性聚氯乙烯（PVC-M）管材高速冲击试验方法

SANS 1283:2002 地下采矿冷水服务用改性聚（氯乙烯）（PVC－M）压力管和连接器

This specification details the requirements for seven pressure classes of modified polyvinyl chloride) (PVC-M) pipe of nominal sizes 50-500 mm

Modified poly(vinyl chloride) (PVC-M) pressure pipe and couplings for cold water services in underground mining

T/CPPIA 3-2020 埋地排水排污用抗冲改性聚氯乙烯（PVC-M）双壁波纹管材

8.1　颜色 管材内外层应色泽均匀，颜色一般为蓝色，其他颜色可由供需双方协商确定。 8.2　外观 8.2.1　管材内外壁不允许有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材端面应平整并与轴线垂直。 8.2.2　管材波谷区内外壁应紧密熔接，不应出现脱开现象。 8.3

Modified impact resistance poly (vinyl chloride) (PVC-M) double wall corrugated pipes for underground soil waste and drainage

SANS 1283:2008 地下矿井内冷水服务用改性聚(氯乙烯)(PVC-M)压力管和连接器

Specifies the requirements for seven pressure classes of modified poly(vinyl chloride) (PVC-M) pipe of nominal sizes 50-500 mm and one class

Modified poly(vinyl chloride) (PVC-M) pressure pipe and couplings for cold water services in underground mining

KS M 3401-2021 压力应用用未增塑聚氯乙烯（PVC-U）管

Unplasticized poly(vinyl chloride) (PVC-U) pipes for pressure applications

KS M 3406-2002 软性聚氯乙烯(PVC)管

이 규격은 주로 액체의 수송에 사용하는 연질 폴리염화비닐 튜브(이하 튜브라 한다.)에 대하

Flexible polyvinyl chloride tube

KS M 3404-2021 非压力应用用未增塑聚氯乙烯（PVC-U）管

Unplasticized poly(vinyl chloride)(PVC-U) pipes for non-pressure applications

KS M 3402-2021 压力应用用未增塑聚氯乙烯（PVC-U）管件

Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for pressure applications

SANS 10112:2003 聚乙烯和聚氯乙烯（PVC－U和PVC－M）管道的安装

Is intended to present (in sufficient detail for general use) the comparative physical, chemical, and mechanical properties of 2 types of plastics

The installation of polyethylene and poly(vinyl chloride)(PVC-U and PVC-M) pipes

AS/NZS 4765(Int)/AMD 1-2002 用于压力应用的改性聚氯乙烯（PVC-M）管材；修正案一

Modified PVC (PVC-M) pipes for pressure applications; Amendment No.1

AS/NZS 4765-2007 压力器具用改进聚氯乙烯PVC(PVC-M)管

Specifies requirements for pipes, integral joints and post-formed bends of PVC-M for the conveyance of water and wastewater under pressure

Modified PVC (PVC-M) pipes for pressure applications

CJ/T 272-2008 给水用抗冲改性聚氯乙烯(PVC-M)管材及管件

本标准规定了给水用抗冲改性聚氯乙烯（PVC-M）管材及管件的材料、产品分类、要求、试验方法、检验规则、标志、包装、运输、贮存。 本标准适用于以聚氯乙烯树脂为主要原料，通过物理改性经挤出成型的管材和注塑成型的管件。 本标准规定的管材与管件适用于压力下输送生活饮用水和一般用途水，水温不超过 45

Modified poly vinyl chloride (PVC-M) pipes and fittings for water supply

GB/T 32018.1-2015 给水用抗冲改性聚氯乙烯(PVC-M)管道系统 第1部分:管材

GB/T 32018的本部分规定了给水用抗冲改性聚氯乙烯(PVC-M)管材的材料、产品分类及等级规格、要求、试验方法、检验规则、标志、包装、运输、贮存。 本部分适用于以聚氯乙烯树脂为主要原料，经共混改性挤出成型的给水用抗冲改性聚氯乙烯(PVC-M)管道系统用管材（以下简称“管材”）。 本部分规定

Modified impact resistance poly (vinyl chloride) (PVC-M) pipe system for water supply.Part 1:Pipes

SANS 966-2:2006 压力管道系统标准．第2部分：改性聚氯乙烯（PVC－M）压力管道系统

This part of SANS 966 specifies requirements for modified polyvinyl chloride) (PVC-M) pipes (with integral joints that incorporate rubber sealing

Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems

SANS 966-2:2008 压力管道系统组件.第2部分:改性(聚)氯乙烯(PVC-M)压力管道系统

Specifies requirements for modified poly(vinyl chloride) (PVC-M)pipes (with integral joints that incorporate rubber sealing rings)and fittings

Components of pressure pipe systems Part 2: Modified poly(vinyl chloride)(PVC-M) pressure pipe systems

DB62/T 4135-2020 抗冲改性聚氯乙烯（PVC-M）管材高速冲击试验方法

SANS 1283:2002 地下采矿冷水服务用改性聚（氯乙烯）（PVC－M）压力管和连接器

This specification details the requirements for seven pressure classes of modified polyvinyl chloride) (PVC-M) pipe of nominal sizes 50-500 mm

Modified poly(vinyl chloride) (PVC-M) pressure pipe and couplings for cold water services in underground mining

T/CPPIA 3-2020 埋地排水排污用抗冲改性聚氯乙烯（PVC-M）双壁波纹管材

8.1　颜色 管材内外层应色泽均匀，颜色一般为蓝色，其他颜色可由供需双方协商确定。 8.2　外观 8.2.1　管材内外壁不允许有气泡、裂口、分解变色线及明显的杂质和不规则波纹。管材内壁应光滑，管材端面应平整并与轴线垂直。 8.2.2　管材波谷区内外壁应紧密熔接，不应出现脱开现象。 8.3

Modified impact resistance poly (vinyl chloride) (PVC-M) double wall corrugated pipes for underground soil waste and drainage

SANS 1283:2008 地下矿井内冷水服务用改性聚(氯乙烯)(PVC-M)压力管和连接器

Specifies the requirements for seven pressure classes of modified poly(vinyl chloride) (PVC-M) pipe of nominal sizes 50-500 mm and one class

Modified poly(vinyl chloride) (PVC-M) pressure pipe and couplings for cold water services in underground mining

KS M 3401-2021 压力应用用未增塑聚氯乙烯（PVC-U）管

Unplasticized poly(vinyl chloride) (PVC-U) pipes for pressure applications

KS M 3406-2002 软性聚氯乙烯(PVC)管

이 규격은 주로 액체의 수송에 사용하는 연질 폴리염화비닐 튜브(이하 튜브라 한다.)에 대하

Flexible polyvinyl chloride tube

KS M 3404-2021 非压力应用用未增塑聚氯乙烯（PVC-U）管

Unplasticized poly(vinyl chloride)(PVC-U) pipes for non-pressure applications

KS M 3402-2021 压力应用用未增塑聚氯乙烯（PVC-U）管件

Unplasticized poly(vinyl chloride)(PVC-U) pipe fittings for pressure applications

SANS 10112:2003 聚乙烯和聚氯乙烯（PVC－U和PVC－M）管道的安装

Is intended to present (in sufficient detail for general use) the comparative physical, chemical, and mechanical properties of 2 types of plastics

The installation of polyethylene and poly(vinyl chloride)(PVC-U and PVC-M) pipes