
发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
本标准规定了建筑消能阻尼器的术语和定义、分类与标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工业与民用建筑所用的建筑消能阻尼器。对构筑物、桥梁、设备等所需的建筑消能阻尼器也可参照使用
Dampers for vibration energy dissipation of buildings
本标准规定了建筑消能阻尼器的术语和定义、分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工业与民用建筑用建筑消能阻尼器。构筑物、桥梁、设备等所需的消能阻尼器也可参照使用
Dampers for vibration energy dissipation of buildings
本标准规定了阻尼弹簧隔振器的产品型号、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于圆柱螺旋弹簧、阻尼材料及壳体所组成的隔振器
The dzmping spring vibration isolator for building
ESDU 83009 provides damping data for the estimation of the small amplitude response of tall buildings to wind excitation. Data enable the modal
Damping of structures. Part 1: tall buildings.
ESDU 83009 provides damping data for the estimation of the small amplitude response of tall buildings to wind excitation. Data enable the modal
Damping of structures Part 1: tall buildings
INTRODUCTION The construction techniques employed in modern high-rise buildings lead to structures of relatively high flexibility and low mass so
Undamped natural vibration of shear buildings
ESDU 79005 gives methods for obtaining the natural frequencies@ mode shapes and normal-mode generalised masses for both lateral and torsional
Undamped natural vibration of shear buildings.
Undamped natural vibration of core buildings
ESDU 81036 provides estimates of frequency@ mode shape@ generalised mass and generalised stiffness for the undamped natural modes of vibration of core
Undamped natural vibration of core buildings
本规程适用于抗震设防烈度为6~9度地区新建建筑结构和既有建筑结构抗震加固的消能减震设计、施工、验收和维护。抗震设防烈度大于9度地区及有特殊要求的新建建筑结构和既有建筑结构抗震加固的消能减震设计、施工、验收和维护,应按有关专门规定执行
Technical specification for seismic energy dissipation of buildings
本标准规定了谐振峰非线性复合阻尼隔振器(以下简称为隔振器)和复合阻尼器(以下简称阻尼器)的分类、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于电子设备、仪器仪表隔振、防冲击使用的复合阻尼隔振器和复合阻尼器
Compound damping isolator and compound damper
本标准规定了谐振峰非线性复合阻尼隔振器(以下简称为隔振器)和复合阻尼器(以下简称阻尼器)的分类、要求、试验方法和验收规则等。 本标准适用于电子设备、仪器仪表隔振、防冲击使用的隔振器和阻尼器的设计、生产和验收
Compound damping isolator and compound damper
Compound dampling isolator and compound damper
本标准规定了采用悬臂梁共振法测定材料振动阻尼特性的方法。测定量包括材料的损耗因子η、弹性杨氏模量E、弹性剪切模量G。 本标准适用于在结构振动、建筑声学和噪声控制等方面应用的材料。在50Hz到5kHz的频率范围及材料的有效使用温度范围内进行测量
Damping materials-Testing method for damping properties
本标准规定了建筑消能阻尼器的术语和定义、分类与标记、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工业与民用建筑所用的建筑消能阻尼器。对构筑物、桥梁、设备等所需的建筑消能阻尼器也可参照使用
Dampers for vibration energy dissipation of buildings
本标准规定了建筑消能阻尼器的术语和定义、分类和标记、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于工业与民用建筑用建筑消能阻尼器。构筑物、桥梁、设备等所需的消能阻尼器也可参照使用
Dampers for vibration energy dissipation of buildings
本标准规定了阻尼弹簧隔振器的产品型号、技术要求、试验方法、检验规则和标志、包装、运输、贮存。 本标准适用于圆柱螺旋弹簧、阻尼材料及壳体所组成的隔振器
The dzmping spring vibration isolator for building
ESDU 83009 provides damping data for the estimation of the small amplitude response of tall buildings to wind excitation. Data enable the modal
Damping of structures. Part 1: tall buildings.
ESDU 83009 provides damping data for the estimation of the small amplitude response of tall buildings to wind excitation. Data enable the modal
Damping of structures Part 1: tall buildings
INTRODUCTION The construction techniques employed in modern high-rise buildings lead to structures of relatively high flexibility and low mass so
Undamped natural vibration of shear buildings
ESDU 79005 gives methods for obtaining the natural frequencies@ mode shapes and normal-mode generalised masses for both lateral and torsional
Undamped natural vibration of shear buildings.
Undamped natural vibration of core buildings
ESDU 81036 provides estimates of frequency@ mode shape@ generalised mass and generalised stiffness for the undamped natural modes of vibration of core
Undamped natural vibration of core buildings
本规程适用于抗震设防烈度为6~9度地区新建建筑结构和既有建筑结构抗震加固的消能减震设计、施工、验收和维护。抗震设防烈度大于9度地区及有特殊要求的新建建筑结构和既有建筑结构抗震加固的消能减震设计、施工、验收和维护,应按有关专门规定执行
Technical specification for seismic energy dissipation of buildings
本标准规定了谐振峰非线性复合阻尼隔振器(以下简称为隔振器)和复合阻尼器(以下简称阻尼器)的分类、技术要求、试验方法、检验规则以及标志、包装、运输、贮存。 本标准适用于电子设备、仪器仪表隔振、防冲击使用的复合阻尼隔振器和复合阻尼器
Compound damping isolator and compound damper
本标准规定了谐振峰非线性复合阻尼隔振器(以下简称为隔振器)和复合阻尼器(以下简称阻尼器)的分类、要求、试验方法和验收规则等。 本标准适用于电子设备、仪器仪表隔振、防冲击使用的隔振器和阻尼器的设计、生产和验收
Compound damping isolator and compound damper
Compound dampling isolator and compound damper
本标准规定了采用悬臂梁共振法测定材料振动阻尼特性的方法。测定量包括材料的损耗因子η、弹性杨氏模量E、弹性剪切模量G。 本标准适用于在结构振动、建筑声学和噪声控制等方面应用的材料。在50Hz到5kHz的频率范围及材料的有效使用温度范围内进行测量
Damping materials-Testing method for damping properties








