螺纹锁固用单组分厌氧胶检测

HB 6769-1993 单组份螺纹锁紧厌氧胶

本标准规定了密封、润滑和渗透型单组份螺纹锁紧厌氧胶的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 　　本标准适用于密封、润滑和渗透型单组份螺纹锁紧厌氧胶?媒涸?℃以上施工时不加底剂可在各种金属表面固化，加用底剂时可地塑料、镀层和睞У谋砻婀袒

HB 6770-1993 单组份柱面固持厌氧胶

本标准规定了单组份柱面固持厌氧胶的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 　　本标准适用于不同间隙的滑动配合零件装配固持用的单组份厌氧胶。该胶在５℃以上施工时不需加用底剂可在各金属表面固化，加用底剂时可在塑料、镀层和玻璃表面上固化

HG/T 3737-2004 单组分厌氧胶粘剂

1．1 本标准规定了应用于螺纹或圆柱形组装件锁固、密封和固持用单组分厌氧胶粘剂的用途、特性、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 1．2 本标准可以用于厌氧胶粘剂的分类，但这种分类方法不适用于工程设计用途。 1．3 本标准没有列出与使用有关的所有可能会遇到的安全事项

Anaerobic single-component adhesives

QC/T 597-1999 螺纹紧固件预涂微胶囊厌氧干膜胶

本标准规定了螺纹紧固件以防松、防漏为使用目的的预涂微胶囊厌氧干膜胶的分类，标志符号，技术条件及试验方法

ARMY MIL-S-46163 A NOTICE 3-2001 密封和润滑复合物:单成分厌氧螺纹锁

This notice should be filed in front of MIL-S-46163A, dated 12 July 1983

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A NOTICE 2-1997 密封和润滑复合物:单成分厌氧螺纹锁

This notice should be filed in front of MIL-S-46163A, dated 12 July 1983

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A INT AMD 3-1995 密封和润滑复合物:单成分厌氧螺纹锁

This interim amendment forme a part of MIbS-46163A, dated 5 December 1985, and ia approved ?or me by all Dapartmenta md Agencie. Of the Department

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A (2)-1993 密封和润滑复合物:单成分厌氧螺纹锁

This specification is approved for use by all Departments and agencies of the Department of Defense

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A VALID NOTICE 1-1991 密封和润滑复合物:单成分厌氧螺纹锁

MIL-S-46163A and Amendment 1, dated 5 December 1985,have been reviewed and determined to be valid for use in acquis

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A-1983 密封和润滑复合物:单成分厌氧螺纹锁

This specification covers single-component anaerobic compounds suitablegor thread-locking and sealing

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-R-46082 B NOTICE 2-2001 厌氧型单成分固持胶

This notice should be filed in front of MIL-R-46082B, dated 10 June 1983

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

ARMY MIL-R-46082 B NOTICE 1-1998 厌氧型单成分固持胶

This notice should be filed in front of Mil-R-46082B, dated 10 June 1983

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

ARMY MIL-R-46082 B (6)-1990 厌氧型单成分固持胶

ALL. DIMENSIONS ARE'IN INCHES

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

ARMY MIL-R-46082 B-1983 厌氧型单成分固持胶

This specification covers the requirements for the manufacture and acceptance of the CCU-121IA Aircraft Fire Extinguisher Cartridge, which

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

GB/T 18747.1-2002 厌氧胶粘剂扭矩强度的测定(螺纹紧固件)

本标准规定了用于螺纹紧固件的厌氧胶粘剂扭矩强度测定。如果适合其他类型的胶粘剂也可采用本方法

The determination of torque strength of anaerobic adhesives (Threaded fasteners)

HB 6769-1993 单组份螺纹锁紧厌氧胶

本标准规定了密封、润滑和渗透型单组份螺纹锁紧厌氧胶的技术要求、试验方法、检验规则及标志、包装、运输和贮存。 　　本标准适用于密封、润滑和渗透型单组份螺纹锁紧厌氧胶?媒涸?℃以上施工时不加底剂可在各种金属表面固化，加用底剂时可地塑料、镀层和睞У谋砻婀袒

HB 6770-1993 单组份柱面固持厌氧胶

本标准规定了单组份柱面固持厌氧胶的技术要求、试验方法、检验规则、标志、包装、运输和贮存。 　　本标准适用于不同间隙的滑动配合零件装配固持用的单组份厌氧胶。该胶在５℃以上施工时不需加用底剂可在各金属表面固化，加用底剂时可在塑料、镀层和玻璃表面上固化

HG/T 3737-2004 单组分厌氧胶粘剂

1．1 本标准规定了应用于螺纹或圆柱形组装件锁固、密封和固持用单组分厌氧胶粘剂的用途、特性、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 1．2 本标准可以用于厌氧胶粘剂的分类，但这种分类方法不适用于工程设计用途。 1．3 本标准没有列出与使用有关的所有可能会遇到的安全事项

Anaerobic single-component adhesives

QC/T 597-1999 螺纹紧固件预涂微胶囊厌氧干膜胶

本标准规定了螺纹紧固件以防松、防漏为使用目的的预涂微胶囊厌氧干膜胶的分类，标志符号，技术条件及试验方法

ARMY MIL-S-46163 A NOTICE 3-2001 密封和润滑复合物:单成分厌氧螺纹锁

This notice should be filed in front of MIL-S-46163A, dated 12 July 1983

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A NOTICE 2-1997 密封和润滑复合物:单成分厌氧螺纹锁

This notice should be filed in front of MIL-S-46163A, dated 12 July 1983

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A INT AMD 3-1995 密封和润滑复合物:单成分厌氧螺纹锁

This interim amendment forme a part of MIbS-46163A, dated 5 December 1985, and ia approved ?or me by all Dapartmenta md Agencie. Of the Department

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A (2)-1993 密封和润滑复合物:单成分厌氧螺纹锁

This specification is approved for use by all Departments and agencies of the Department of Defense

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A VALID NOTICE 1-1991 密封和润滑复合物:单成分厌氧螺纹锁

MIL-S-46163A and Amendment 1, dated 5 December 1985,have been reviewed and determined to be valid for use in acquis

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-S-46163 A-1983 密封和润滑复合物:单成分厌氧螺纹锁

This specification covers single-component anaerobic compounds suitablegor thread-locking and sealing

SEALING, LUBRICATING AND WICKING COMPOUNDS: THREAD-LOCKING, ANAEROBIC, SINGLE-COMPONENT

ARMY MIL-R-46082 B NOTICE 2-2001 厌氧型单成分固持胶

This notice should be filed in front of MIL-R-46082B, dated 10 June 1983

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

ARMY MIL-R-46082 B NOTICE 1-1998 厌氧型单成分固持胶

This notice should be filed in front of Mil-R-46082B, dated 10 June 1983

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

ARMY MIL-R-46082 B (6)-1990 厌氧型单成分固持胶

ALL. DIMENSIONS ARE'IN INCHES

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

ARMY MIL-R-46082 B-1983 厌氧型单成分固持胶

This specification covers the requirements for the manufacture and acceptance of the CCU-121IA Aircraft Fire Extinguisher Cartridge, which

RETAINING COMPOUNDS, SINGLE COMPONENT, ANAEROBIC

GB/T 18747.1-2002 厌氧胶粘剂扭矩强度的测定(螺纹紧固件)

本标准规定了用于螺纹紧固件的厌氧胶粘剂扭矩强度测定。如果适合其他类型的胶粘剂也可采用本方法

The determination of torque strength of anaerobic adhesives (Threaded fasteners)