
发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
本标准规定了照明电器产品中有毒有害物质的最大允许含量。 本标准适用于下列照明电器产品: 白炽灯、卤钨灯; 荧光灯,包括双端荧光灯、单端荧光灯、单端荧光灯、自镇流荧光灯; 高强度放电灯,包括高压汞灯、高压钠灯、金属卤化物灯; 发光二极管; 灯用附件,包括镇流器、启动器、触发器、变压器及其他
Requirements for concentration limits for certain hazardous substances in lighting equipments
本指导性文件规定了照明电器产品及其部件和材料拆分的原则和方法。 本指导性技术文件使用产品范围为照明电器产品及其部件和材料
Disassembly requirements for testing hazardous substances in lighting equipment
技术要求 7.1基本要求 本标准所涉及LED道路照明产品已包含二次配光的灯具或装入道路照明灯具后需重新配光的LED模块。 本标准所使用的道路照明产品,安全应符合GB7000.1、GB7000.203、GB7000.5-2016的要求,电磁兼容应符合GB17625.1、GB17625.2、GB
本标准规定了报废照明产品的防治,以及回收再利用、再循环的处理规范。 本规范适用于所有照明电器产品
Specification of waste lighting products recycling and disposal
本规则适用于电源电压高于36V和不超过1000V的嵌入式灯具、固定式通用灯具、可移式通用灯具;电源电压不超过1000V的荧光灯用镇流器、放电灯(荧光灯除外)用镇流器、荧光灯用交流电子镇流器
The purpose of this standard is to specify the range of chromaticity for general lighting with solid-state lighting (SSL) products@ as well
Electric Lamps — Specifications for the Chromaticity of Solid-State Lighting Products
The purpose of this standard is to specify the range of chromaticities recommended for general lighting with solid state lighting (SSL) products
Electric Lamps - Specifications for the Chromaticity of Solid-state Lighting Products
Lists categories, with definitions, of present day lighting products and gives pictorial examples
Classification and interpretation of new lighting products
Specifications for the Chromaticity of Solid State Lighting Products for Electric Lamps
Determination of inrush current characteristics of lighting products
IEC 63129:2020 describes a method, based on measurements combined with calculations, to determine specific characteristics of the inrush current
Determination of inrush current characteristics of lighting products
Electric luminaires; side entry luminaires; connection dimensions
Electric luminaires; side entry luminaires; connection dimensions
本标准规定了LED照明终端产品(以下简称LED照明产品)的能效要求和测量方法。 本标准适用于总光通量大于等于150lm,面向终端应用的、功能结构完整的、对公共电网电源即插即用的、包含LED核心光源的整体照明器具
Classification and interpretation of new lighting products (IEC TR 60972:1989 + A1:1991)
本标准规定了LED照明产品Ⅲ型环境声明计划建立与运行流程、Ⅲ型环境声明计划的建立、PCR文件的制定评审及Ⅲ型环境声明的编制与独立验证。 本标准适用于LED照明产品Ⅲ型环境声明的建立、运行和管理
本标准规定了照明电器产品中有毒有害物质的最大允许含量。 本标准适用于下列照明电器产品: 白炽灯、卤钨灯; 荧光灯,包括双端荧光灯、单端荧光灯、单端荧光灯、自镇流荧光灯; 高强度放电灯,包括高压汞灯、高压钠灯、金属卤化物灯; 发光二极管; 灯用附件,包括镇流器、启动器、触发器、变压器及其他
Requirements for concentration limits for certain hazardous substances in lighting equipments
本指导性文件规定了照明电器产品及其部件和材料拆分的原则和方法。 本指导性技术文件使用产品范围为照明电器产品及其部件和材料
Disassembly requirements for testing hazardous substances in lighting equipment
技术要求 7.1基本要求 本标准所涉及LED道路照明产品已包含二次配光的灯具或装入道路照明灯具后需重新配光的LED模块。 本标准所使用的道路照明产品,安全应符合GB7000.1、GB7000.203、GB7000.5-2016的要求,电磁兼容应符合GB17625.1、GB17625.2、GB
本标准规定了报废照明产品的防治,以及回收再利用、再循环的处理规范。 本规范适用于所有照明电器产品
Specification of waste lighting products recycling and disposal
本规则适用于电源电压高于36V和不超过1000V的嵌入式灯具、固定式通用灯具、可移式通用灯具;电源电压不超过1000V的荧光灯用镇流器、放电灯(荧光灯除外)用镇流器、荧光灯用交流电子镇流器
The purpose of this standard is to specify the range of chromaticity for general lighting with solid-state lighting (SSL) products@ as well
Electric Lamps — Specifications for the Chromaticity of Solid-State Lighting Products
The purpose of this standard is to specify the range of chromaticities recommended for general lighting with solid state lighting (SSL) products
Electric Lamps - Specifications for the Chromaticity of Solid-state Lighting Products
Lists categories, with definitions, of present day lighting products and gives pictorial examples
Classification and interpretation of new lighting products
Specifications for the Chromaticity of Solid State Lighting Products for Electric Lamps
Determination of inrush current characteristics of lighting products
IEC 63129:2020 describes a method, based on measurements combined with calculations, to determine specific characteristics of the inrush current
Determination of inrush current characteristics of lighting products
Electric luminaires; side entry luminaires; connection dimensions
Electric luminaires; side entry luminaires; connection dimensions
本标准规定了LED照明终端产品(以下简称LED照明产品)的能效要求和测量方法。 本标准适用于总光通量大于等于150lm,面向终端应用的、功能结构完整的、对公共电网电源即插即用的、包含LED核心光源的整体照明器具
Classification and interpretation of new lighting products (IEC TR 60972:1989 + A1:1991)
本标准规定了LED照明产品Ⅲ型环境声明计划建立与运行流程、Ⅲ型环境声明计划的建立、PCR文件的制定评审及Ⅲ型环境声明的编制与独立验证。 本标准适用于LED照明产品Ⅲ型环境声明的建立、运行和管理








