聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料检测

BS EN ISO 8257-2:2002 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.试样制备和性能测定

1 This part of ISO 8257 specifies procedures for moulding test specimens of PMMA materials in a specified state, and methods for measuring

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Preparation of test specimens and determination of properties

GB/T 15597.1-2009 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名系统和分类基础

1.1 GB/T 15597的本部分规定了热塑性塑料聚甲基丙烯酸甲酯(PMMA)材料的命名系统，它可以作为分类的基础。 1.2 PMMA塑料的类型是以下列特征性能为基础以及相关预定用途和（或）加工方法、重要性能、添加剂和着色剂的信息组成的分类的分类系统加以区分： a）维卡软化温度； b）熔体质

Plastics.Poly(methyl metharylate)(PMMA) moulding and extrusion materials.Part 1:Designation system and basis for specifications

GB/T 15597.2-2010 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定

GB/T 15597的本部分规定了在规定状态下PMMA材料的模塑试样方法和测试性能方法。本部分所列的以及GB/T 15597.1-2009中涉及的所有性能都应以本部分的方法来测定。 这里均不再列出性能具体数值。对于PMMA模塑和挤塑材料的命名所需的那些性能在GB/T 15597.1-2009中给出

Plastics.Poly(methyl methacrylate)(PMMA)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties

ISO 8257-1:1998 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第1部分:命名体系和基本规范

1 This part of ISO 8257 establishes a system of designation for poly(methyl methacrylate) (PMMA) thermoplastic materials, which may be used

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications

DIN EN ISO 8257-1:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名体系和基本规范

This part of the standard establishes a system of designation for poly(methyl methacrylate) (PMMA) thermoplastic materials, which may be used

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998); English version of DIN EN ISO 8257-1:2006-06

EN ISO 8257-1:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名体系和基本规范

This part of ISO 8257 establishes a system of designation for poly(methyl methacrylate) (PMMA) thermoplasticmaterials, which may be used as the basis

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)

KS M ISO 8257-2-2002(2017 塑料 - 聚（甲基丙烯酸甲酯）（PMMA）模塑和挤塑材料 - 第2部分:试样制备和性能测定

Plastics－Poly(methyl methacrylate) (PMMA) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

ISO 8257-2:2001 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样的制备和性能的测定

1 This part of ISO 8257 specifies procedures for moulding test specimens of PMMA materials in a specified state, and methods for measuring

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

NF T53-031-2:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第2部分:试样的制备和性能的测定

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.

DIN EN ISO 8257-1 Berichtigung 1:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名系统和基本规范(ISO 8257-1:1998)

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998); German version EN ISO 8257-1:2006, Corrigenda to DIN EN ISO 8257-1:2006-06

BS ISO 8257-1:1995 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤压材料.标记

Establishes a designation system for poly(methyl methacrylate) (PMMA) moulding and extrusion materials which may be used as the basis

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Designation

GB/T 15597-1995 聚甲基丙烯酸甲酯(PMMA)模塑材料

本标准规定了聚甲基丙烯酸甲酯（PMMA）模塑材料技术要求、试验方法、检验规则及标志、包装、运输、贮存的要求。 本标准适用于以甲基丙烯酸甲酯（MMA）为主的均聚物或共聚物，并经挤塑成粒的本色透明PMMA模塑材料

Polymethyl methacrylate (PMMA) moulding materials

PN C89111-01-1992 塑料聚乙烯（甲基丙烯酸甲酯（PMMA）模塑和挤压材料名称

Przedmiotem niniejszego arkusza normy jest system oznaczenia materia?ów termoplastycznych homopolimerów i kopolimerów polimetakrylanu metylu) zawieraj

Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Designation

HG/T 2628-1994 聚甲基丙烯酸甲酯（PMMA）模塑材料命名

本标准规定了聚甲基丙烯酸甲酯(PMMA)模塑材料命名方法。本命名方法是根据PMMA模塑材料主要用途或加工方法、重要性能、添加剂或着色、维卡软化温度及熔体流动速率等内容进行命名的。 本标准适用于甲基丙烯酸甲酯均聚物和甲基丙烯酸甲酯共聚物。共聚物中甲基丙烯酸甲酯质量含量至少80%，丙烯酸酯或

NF T53-031:1990 塑料制品.聚(甲基丙烯酸甲酯)(聚甲基丙烯酸甲酯)模制和挤制材料.标识

Plastics. Poly(methyl methacrylate) (pmma) moulding and extrusion materials. Part 1 : designation.

BS EN ISO 8257-2:2002 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.试样制备和性能测定

1 This part of ISO 8257 specifies procedures for moulding test specimens of PMMA materials in a specified state, and methods for measuring

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Preparation of test specimens and determination of properties

GB/T 15597.1-2009 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名系统和分类基础

1.1 GB/T 15597的本部分规定了热塑性塑料聚甲基丙烯酸甲酯(PMMA)材料的命名系统，它可以作为分类的基础。 1.2 PMMA塑料的类型是以下列特征性能为基础以及相关预定用途和（或）加工方法、重要性能、添加剂和着色剂的信息组成的分类的分类系统加以区分： a）维卡软化温度； b）熔体质

Plastics.Poly(methyl metharylate)(PMMA) moulding and extrusion materials.Part 1:Designation system and basis for specifications

GB/T 15597.2-2010 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分：试样制备和性能测定

GB/T 15597的本部分规定了在规定状态下PMMA材料的模塑试样方法和测试性能方法。本部分所列的以及GB/T 15597.1-2009中涉及的所有性能都应以本部分的方法来测定。 这里均不再列出性能具体数值。对于PMMA模塑和挤塑材料的命名所需的那些性能在GB/T 15597.1-2009中给出

Plastics.Poly(methyl methacrylate)(PMMA)moulding and extrusion materials.Part 2:Preparation of test specimens and determination of properties

ISO 8257-1:1998 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第1部分:命名体系和基本规范

1 This part of ISO 8257 establishes a system of designation for poly(methyl methacrylate) (PMMA) thermoplastic materials, which may be used

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications

DIN EN ISO 8257-1:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名体系和基本规范

This part of the standard establishes a system of designation for poly(methyl methacrylate) (PMMA) thermoplastic materials, which may be used

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998); English version of DIN EN ISO 8257-1:2006-06

EN ISO 8257-1:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名体系和基本规范

This part of ISO 8257 establishes a system of designation for poly(methyl methacrylate) (PMMA) thermoplasticmaterials, which may be used as the basis

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998)

KS M ISO 8257-2-2002(2017 塑料 - 聚（甲基丙烯酸甲酯）（PMMA）模塑和挤塑材料 - 第2部分:试样制备和性能测定

Plastics－Poly(methyl methacrylate) (PMMA) moulding and extrusion materials－Part 2：Preparation of test specimens and determination of properties

ISO 8257-2:2001 塑料 聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料 第2部分:试样的制备和性能的测定

1 This part of ISO 8257 specifies procedures for moulding test specimens of PMMA materials in a specified state, and methods for measuring

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties

NF T53-031-2:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第2部分:试样的制备和性能的测定

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 2 : preparation of test specimens and determination of properties.

DIN EN ISO 8257-1 Berichtigung 1:2006 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤塑材料.第1部分:命名系统和基本规范(ISO 8257-1:1998)

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Part 1: Designation system and basis for specifications (ISO 8257-1:1998); German version EN ISO 8257-1:2006, Corrigenda to DIN EN ISO 8257-1:2006-06

BS ISO 8257-1:1995 塑料.聚甲基丙烯酸甲酯(PMMA)模塑和挤压材料.标记

Establishes a designation system for poly(methyl methacrylate) (PMMA) moulding and extrusion materials which may be used as the basis

Plastics - Poly(methyl methacrylate) (PMMA) moulding and extrusion materials - Designation

GB/T 15597-1995 聚甲基丙烯酸甲酯(PMMA)模塑材料

本标准规定了聚甲基丙烯酸甲酯（PMMA）模塑材料技术要求、试验方法、检验规则及标志、包装、运输、贮存的要求。 本标准适用于以甲基丙烯酸甲酯（MMA）为主的均聚物或共聚物，并经挤塑成粒的本色透明PMMA模塑材料

Polymethyl methacrylate (PMMA) moulding materials

PN C89111-01-1992 塑料聚乙烯（甲基丙烯酸甲酯（PMMA）模塑和挤压材料名称

Przedmiotem niniejszego arkusza normy jest system oznaczenia materia?ów termoplastycznych homopolimerów i kopolimerów polimetakrylanu metylu) zawieraj

Plastics Poly(methyl methacrylate) (PMMA) moulding and extrusion materials Designation

HG/T 2628-1994 聚甲基丙烯酸甲酯（PMMA）模塑材料命名

本标准规定了聚甲基丙烯酸甲酯(PMMA)模塑材料命名方法。本命名方法是根据PMMA模塑材料主要用途或加工方法、重要性能、添加剂或着色、维卡软化温度及熔体流动速率等内容进行命名的。 本标准适用于甲基丙烯酸甲酯均聚物和甲基丙烯酸甲酯共聚物。共聚物中甲基丙烯酸甲酯质量含量至少80%，丙烯酸酯或

NF T53-031:1990 塑料制品.聚(甲基丙烯酸甲酯)(聚甲基丙烯酸甲酯)模制和挤制材料.标识

Plastics. Poly(methyl methacrylate) (pmma) moulding and extrusion materials. Part 1 : designation.