服务热线:400-635-0567

结构胶粘剂及裂缝注浆料检测

发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22

点击量:0

军工检测 其他检测

JT/T 990-2015 桥梁混凝土

本标准规定了桥梁混凝土裂缝压注胶和裂缝注浆料的分类、技术要求、试验方法、检验规则,以及标志、包装、运输与储存。 本标准适用于桥梁混凝土裂缝压注胶和裂缝注浆料

Grouting glue and grouting material for concrete crack of bridge

DB35/T 1191-2011 公路工程混凝土压力)法修复技术规程

本规程规定了公路工程混凝土结构裂缝压力注胶(浆)法修复技术规程的总则、术语、材料、设计规定、施工要求和质量检验评定等内容。 本规程适用于福建省公路工程路面、桥梁、隧道、涵洞等水泥混凝土结构的裂缝采用压力注胶(浆)法修复的设计、施工和验收

KS F 4935-2008 混凝土或接的渗漏维护和柔性体灌型封条法

이 규격은 콘크리트 지하구조물, 건축물 등의 지붕, 외벽, 바닥 등에서 누수가 발생한 균열

Sealer of injection type for water leakage maintenance of adhesive flexible rubber asphalt series

ARMY A-A-59786-2005 ()

This commercial item description(CID) covers a general use adhesive for bonding composite materials

ADHESIVE, (STRUCTURAL ADHESIVE)

BS EN 13887:2003 .前金属和塑表面制备指南

This European Standard specifies the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation

Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding

JIS K 6867:1999 .组件耐久性的特性.楔形破试验

この規格は,金属接着剤とプライマーとの界面における接着接合部の強さと効力を定量的方法で推量するものである。 またこの規格は,基材の表面処理のチェック方法として利用することができる。 この方法は,現在アルミニウムとチタン合金との接着に適用するが,被着材の厚さと硬さを考慮したうえで,他の金属及びプラ

Adhesives -- Characterization of durability of structural-adhesive-bonded assemblies -- Wedge rupture test

GM 9985877-1997 膜

For gummiartiklar som ej utsatts for inverkan av oljor eller branslen, och dar hoga krav stalls hallfasthet, t ex gummidampare

Adhesive, Structural, Film

EN 12002:2002 地砖.和灌横向变形的测定

Adhesives for Tiles - Determination of Transverse Deformation for Cementitious Adhesives and Grouts

EN 12002:1997 地砖.和灌横向变形的测定

Adhesives for Tiles - Determination of Transverse Deformation for Cementitious Adhesives and Grouts

EN 12002:2008 地砖.和灌横向变形的测定

Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts

ISO 10354:1992 接组件间耐久特性 楔形破试验

Simulates in a qualitative manner the forces and effects on an adhesive-bonded joint at a metal-adhesive/primer interface. It can also be used

Adhesives; caracterization of durability of structural-adhesive-bonded assemblies; wedge rupture test

ISO 25217:2009 .双悬臂梁和锥形双悬臂梁试样测定的1式

This International Standard specifies a method, based upon linear elastic fracture mechanics (LEFM), for the determination of the fracture resistance

Adhesives - Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens

BS EN 12002:2002 地砖.和水泥横向变形的测定

This European Standard specifies the test method to be used to determine the transverse deformation of cementitious ceramic tile adhesives

Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts

NF T76-204*NF EN 13887:2004 合前金属和塑表面的准备指南

Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding

GM 9986065-1994 非

Kravspecifikation for alternativa stomljuddampningsmaterial

Adhesive, Solvent Based, Nonstructural

JT/T 990-2015 桥梁混凝土

本标准规定了桥梁混凝土裂缝压注胶和裂缝注浆料的分类、技术要求、试验方法、检验规则,以及标志、包装、运输与储存。 本标准适用于桥梁混凝土裂缝压注胶和裂缝注浆料

Grouting glue and grouting material for concrete crack of bridge

DB35/T 1191-2011 公路工程混凝土压力)法修复技术规程

本规程规定了公路工程混凝土结构裂缝压力注胶(浆)法修复技术规程的总则、术语、材料、设计规定、施工要求和质量检验评定等内容。 本规程适用于福建省公路工程路面、桥梁、隧道、涵洞等水泥混凝土结构的裂缝采用压力注胶(浆)法修复的设计、施工和验收

KS F 4935-2008 混凝土或接的渗漏维护和柔性体灌型封条法

이 규격은 콘크리트 지하구조물, 건축물 등의 지붕, 외벽, 바닥 등에서 누수가 발생한 균열

Sealer of injection type for water leakage maintenance of adhesive flexible rubber asphalt series

ARMY A-A-59786-2005 ()

This commercial item description(CID) covers a general use adhesive for bonding composite materials

ADHESIVE, (STRUCTURAL ADHESIVE)

BS EN 13887:2003 .前金属和塑表面制备指南

This European Standard specifies the usual procedures for the preparation of component surfaces prior to bonding for either laboratory evaluation

Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding

JIS K 6867:1999 .组件耐久性的特性.楔形破试验

この規格は,金属接着剤とプライマーとの界面における接着接合部の強さと効力を定量的方法で推量するものである。 またこの規格は,基材の表面処理のチェック方法として利用することができる。 この方法は,現在アルミニウムとチタン合金との接着に適用するが,被着材の厚さと硬さを考慮したうえで,他の金属及びプラ

Adhesives -- Characterization of durability of structural-adhesive-bonded assemblies -- Wedge rupture test

GM 9985877-1997 膜

For gummiartiklar som ej utsatts for inverkan av oljor eller branslen, och dar hoga krav stalls hallfasthet, t ex gummidampare

Adhesive, Structural, Film

EN 12002:2002 地砖.和灌横向变形的测定

Adhesives for Tiles - Determination of Transverse Deformation for Cementitious Adhesives and Grouts

EN 12002:1997 地砖.和灌横向变形的测定

Adhesives for Tiles - Determination of Transverse Deformation for Cementitious Adhesives and Grouts

EN 12002:2008 地砖.和灌横向变形的测定

Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts

ISO 10354:1992 接组件间耐久特性 楔形破试验

Simulates in a qualitative manner the forces and effects on an adhesive-bonded joint at a metal-adhesive/primer interface. It can also be used

Adhesives; caracterization of durability of structural-adhesive-bonded assemblies; wedge rupture test

ISO 25217:2009 .双悬臂梁和锥形双悬臂梁试样测定的1式

This International Standard specifies a method, based upon linear elastic fracture mechanics (LEFM), for the determination of the fracture resistance

Adhesives - Determination of the mode 1 adhesive fracture energy of structural adhesive joints using double cantilever beam and tapered double cantilever beam specimens

BS EN 12002:2002 地砖.和水泥横向变形的测定

This European Standard specifies the test method to be used to determine the transverse deformation of cementitious ceramic tile adhesives

Adhesives for tiles - Determination of transverse deformation for cementitious adhesives and grouts

NF T76-204*NF EN 13887:2004 合前金属和塑表面的准备指南

Structural adhesives - Guidelines for surface preparation of metals and plastics prior to adhesive bonding

GM 9986065-1994 非

Kravspecifikation for alternativa stomljuddampningsmaterial

Adhesive, Solvent Based, Nonstructural

检测流程
填写并提交定制服务需求表
技术评估和方案讨论
对选定的试验方法进行报价
合同签定与付款
按期交付检测报告和相关数据
想了解更多检测项目
请点击咨询在线工程师
点击咨询
联系我们
服务热线:400-635-0567
地址:北京市丰台区航丰路8号院1号楼1层121
邮编:10000
总机:400-635-0567
联系我们

服务热线:400-635-0567

投诉建议:010-82491398

报告问题解答:010-8646-0567-8

周期、价格等

咨询

技术咨询