镀锌及镀铝锌钢板检测

SN/T 2951-2011 镀锌及镀铝锌钢板镀层化学成分分析方法

本部分规定了电感耦合等离子体原子发射光谱法测定镀锌及镀铝锌钢板镀层化学成分分析方法。 本部分适用于表面规则试样的测定。测定范围见表1. 表1 测定元素含量范围（略

Determination of chemical composition in galvanized coated steel sheets and aluminium zinc alloy coated steel sheets

AS 1397-1993 钢板和钢带 热浸镀锌或镀铝/锌

Specifies requirements for formable and structural grades of hot-dipped zinc-coated and aluminium/zinc-coated sheet and strip, up to and including 5.0

Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

GB/T 14978-2008 连续热镀铝锌合金镀层钢板及钢带

本标准规定了连续热镀铝锌合金镀层钢板及钢带(以下简称为钢板及钢带)的术语和定义、分类和代号、尺寸、外形、重量、技术要求、检验和试验、包装、标志和质量证明书等内容。 本标准适用于厚度为0.30 mm～3.O mm的钢板及钢带,主要用于建筑、家电、电子电气和汽车等行业

Continuously hot-dip aluminum-zinc alloy coated steel sheet and strip

AS 1397-2001 钢板和带材.热浸镀锌或镀铝/锌

Specifies requirements for formable and structural grades of hot-dip zinc-coated and aluminium/zinc-coated steel sheet and strip, up to and including

Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

KS D 3030-2019 热镀锌铝镁合金镀层钢板及线圈

Hot-dip zinc-aluminium-magnesium alloy-coated steel sheets and coils

GB/T 15675-2008 连续电镀锌、锌镍合金镀层钢板及钢带

本标准规定了连续电镀锌、锌镍合金镀层钢板及钢带（以下简称钢板及钢带）的术语和定义、分类和代号、尺寸、外形、重量、技术要求、检验和试验、包装、标志和质量证明书等要求。 本标准适用于汽车、家电、电子等行业使用的电镀锌、锌镍合金镀层钢板及钢带

Continuously electrolytically zinc/zinc-nickel alloy coated steel sheet and strip

GB/T 15675-2020 连续电镀锌、锌镍合金镀层钢板及钢带

Continuously electrolytically zinc/zinc-nickel alloy coated steel sheet and strip

YB/T 4761-2019 连续热镀锌铝镁合金镀层钢板及钢带

YB/T 4634-2017 连续热镀铝锌镁合金镀层钢板及钢带

GB/T 2518-2019 连续热镀锌和锌合金镀层钢板及钢带

Continuously hot-dip zinc and zinc alloy coated steel sheet and strip

SAE J1562-1999 锌及锌合金（热浸镀和电镀）镀层钢板的选择

Zinc and zinc-alloy coated steel is used to enhance a structures protection against corrosion degradation. For the purpose of this SAE Recommended

Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet

JIS G 3313:1990 电镀锌钢板及钢带

Electrolytic zinc-coated steel sheets and coils

AS 1445-1986 连续热浸镀锌或镀铝-锌钢板 76mm型波纹铁

Specifies requirements for 76 mm pitch corrugated steel sheet manufactured from hot-dipped zinc-coated or aluminium/zinc-coated steel sheet

Hot-dipped zinc-coated or aluminium/zinc-coated steel sheet - 76 mm pitch corrugated

ASTM A653/A653M-98 热浸镀锌（镀锌）或锌铁合金镀层（镀锌）钢板的标准规范

Standard Specification for Steel Sheet, Zinc-Coated (Galvinized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

ASTM A653/A653M-02 热浸镀锌（镀锌）或锌铁合金镀层（镀锌）钢板的标准规范

1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

SN/T 2951-2011 镀锌及镀铝锌钢板镀层化学成分分析方法

本部分规定了电感耦合等离子体原子发射光谱法测定镀锌及镀铝锌钢板镀层化学成分分析方法。 本部分适用于表面规则试样的测定。测定范围见表1. 表1 测定元素含量范围（略

Determination of chemical composition in galvanized coated steel sheets and aluminium zinc alloy coated steel sheets

AS 1397-1993 钢板和钢带 热浸镀锌或镀铝/锌

Specifies requirements for formable and structural grades of hot-dipped zinc-coated and aluminium/zinc-coated sheet and strip, up to and including 5.0

Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

GB/T 14978-2008 连续热镀铝锌合金镀层钢板及钢带

本标准规定了连续热镀铝锌合金镀层钢板及钢带(以下简称为钢板及钢带)的术语和定义、分类和代号、尺寸、外形、重量、技术要求、检验和试验、包装、标志和质量证明书等内容。 本标准适用于厚度为0.30 mm～3.O mm的钢板及钢带,主要用于建筑、家电、电子电气和汽车等行业

Continuously hot-dip aluminum-zinc alloy coated steel sheet and strip

AS 1397-2001 钢板和带材.热浸镀锌或镀铝/锌

Specifies requirements for formable and structural grades of hot-dip zinc-coated and aluminium/zinc-coated steel sheet and strip, up to and including

Steel sheet and strip - Hot-dipped zinc-coated or aluminium/zinc-coated

KS D 3030-2019 热镀锌铝镁合金镀层钢板及线圈

Hot-dip zinc-aluminium-magnesium alloy-coated steel sheets and coils

GB/T 15675-2008 连续电镀锌、锌镍合金镀层钢板及钢带

本标准规定了连续电镀锌、锌镍合金镀层钢板及钢带（以下简称钢板及钢带）的术语和定义、分类和代号、尺寸、外形、重量、技术要求、检验和试验、包装、标志和质量证明书等要求。 本标准适用于汽车、家电、电子等行业使用的电镀锌、锌镍合金镀层钢板及钢带

Continuously electrolytically zinc/zinc-nickel alloy coated steel sheet and strip

GB/T 15675-2020 连续电镀锌、锌镍合金镀层钢板及钢带

Continuously electrolytically zinc/zinc-nickel alloy coated steel sheet and strip

YB/T 4761-2019 连续热镀锌铝镁合金镀层钢板及钢带

YB/T 4634-2017 连续热镀铝锌镁合金镀层钢板及钢带

GB/T 2518-2019 连续热镀锌和锌合金镀层钢板及钢带

Continuously hot-dip zinc and zinc alloy coated steel sheet and strip

SAE J1562-1999 锌及锌合金（热浸镀和电镀）镀层钢板的选择

Zinc and zinc-alloy coated steel is used to enhance a structures protection against corrosion degradation. For the purpose of this SAE Recommended

Selection of Zinc and Zinc-Alloy (Hot-Dipped and Electrodeposited) Coated Steel Sheet

JIS G 3313:1990 电镀锌钢板及钢带

Electrolytic zinc-coated steel sheets and coils

AS 1445-1986 连续热浸镀锌或镀铝-锌钢板 76mm型波纹铁

Specifies requirements for 76 mm pitch corrugated steel sheet manufactured from hot-dipped zinc-coated or aluminium/zinc-coated steel sheet

Hot-dipped zinc-coated or aluminium/zinc-coated steel sheet - 76 mm pitch corrugated

ASTM A653/A653M-98 热浸镀锌（镀锌）或锌铁合金镀层（镀锌）钢板的标准规范

Standard Specification for Steel Sheet, Zinc-Coated (Galvinized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process

ASTM A653/A653M-02 热浸镀锌（镀锌）或锌铁合金镀层（镀锌）钢板的标准规范

1.1 This specification covers steel sheet, zinc-coated (galvanized) or zinc-iron alloy-coated (galvannealed) by the hot-dip process in coils

Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process