
发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
本文件规定了配电网使用的10kV和20kV交流传感器的型号命名、技术要求、试验项目、试验方法、检验规则、使用寿命和可靠性要求、包装及存储条件。 本文件适用于10kV和20kV配电网馈线及柱上开关和环网柜安装使用的基于电磁感应原理的电流传感器和基于阻抗分压原理的电压传感器的设计、制造和试验
Technical specifications for current and voltage transducers in 10kV and 20kV distribution networks
The context of the NTCIP is one part of the Intelligent Transportation Systems (ITS) standardization activities covering base standards, profiles
National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control v01.08; A Joint Standard of AASHTO, ITE, and NEMA
The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change
RELAY, ALTERNATING CURRENT, POWER-SENSING
This specification covers alternating current (a.c.), power-sensing relays (see6.4.1) using electraaagnetic devices or solid state circuitry
RELAY, ALTERNATING CURRENT, POWER-SENSING
本标准规定了交流差动变压器式位移传感器的型式、基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于采用差动变压器原理制成的直线位移传感器
Alternating-current linear variable differential transformer (AC-AC LVDT) displacement transducers
Electrical measuring transducers for converting A.C. electrical quantities into D.C. electrical quantities
Electrical measuring transducers for converting AC electric quantities into DC electric quantities, Part 1 : General purpose transducers
本标准规范了路面多传感器融合的交通流智能感知系统的设计,主要从数据获取、数据安全、数据分发和数据共享原则等方面提出了基本要求,重点对智慧路贴构成、智慧路贴部署方式、多传感器信息融合、数据传输方式等技术要求进行了详细规定
Technical specification of traffic flow intelligent perception based on pavement multi-sensor fusion
Electrical measuring transducers for converting AC electric quantities to DC electric quantities - Part 2: Outside transducers and bad environment
本文件规范了气流传感器的范围、术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于插针式、贴片式、引线式类气流传感器。本产品主要用于电子烟气流传感,用来检查吸烟时的负压转换成输出电压驱动雾化装置
Airflow sensors
This notice should be filed in front of MIL-T-27305C, dated 16 December 1987
TRANSMITTER, RATE OF FLOW
This amendment forms a part of MIL-T-27305C(USAF), dated 16 December 1987, and is approved for use by the Department of the Air Force
TRANSMITTER, RATE OF FLOW
This specification is approved for use within the Department of the Air Force, and is available for use by all Departments and Agencies
TRANSMITTER, RATE OF FLOW
本标准规定了穿孔式直流漏电流传感器(以下简称漏电流传感器)的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于将直流正负馈线间的漏电流变换为直流电压(电流),在测量范围内输出是对应输入的函数的电流传感器。 本标准适用于测量1000mA及以下的直流小电流的漏电流
Direct-current leakage current sensor
本标准规定了射流水流量传感器的术语和定义、产品分类、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于低压直流(或电池)供电、脉冲信号输出的封闭满管道射流振荡型水流量传感器(以下简称传感器),也适用于射流冷、热水水表、射流流量计、射流流量变送器等水流量检测仪表中的公称通
Fluidic-oscillator type water flow transducer
本文件规定了配电网使用的10kV和20kV交流传感器的型号命名、技术要求、试验项目、试验方法、检验规则、使用寿命和可靠性要求、包装及存储条件。 本文件适用于10kV和20kV配电网馈线及柱上开关和环网柜安装使用的基于电磁感应原理的电流传感器和基于阻抗分压原理的电压传感器的设计、制造和试验
Technical specifications for current and voltage transducers in 10kV and 20kV distribution networks
The context of the NTCIP is one part of the Intelligent Transportation Systems (ITS) standardization activities covering base standards, profiles
National Transportation Communications for ITS Protocol Object Definitions for Closed Circuit Television (CCTV) Camera Control v01.08; A Joint Standard of AASHTO, ITE, and NEMA
The activities listed above were interested in this document as of the date of this document. Since organizations and responsibilities can change
RELAY, ALTERNATING CURRENT, POWER-SENSING
This specification covers alternating current (a.c.), power-sensing relays (see6.4.1) using electraaagnetic devices or solid state circuitry
RELAY, ALTERNATING CURRENT, POWER-SENSING
本标准规定了交流差动变压器式位移传感器的型式、基本参数、技术要求、试验方法、检验规则、标志、包装和贮存。 本标准适用于采用差动变压器原理制成的直线位移传感器
Alternating-current linear variable differential transformer (AC-AC LVDT) displacement transducers
Electrical measuring transducers for converting A.C. electrical quantities into D.C. electrical quantities
Electrical measuring transducers for converting AC electric quantities into DC electric quantities, Part 1 : General purpose transducers
本标准规范了路面多传感器融合的交通流智能感知系统的设计,主要从数据获取、数据安全、数据分发和数据共享原则等方面提出了基本要求,重点对智慧路贴构成、智慧路贴部署方式、多传感器信息融合、数据传输方式等技术要求进行了详细规定
Technical specification of traffic flow intelligent perception based on pavement multi-sensor fusion
Electrical measuring transducers for converting AC electric quantities to DC electric quantities - Part 2: Outside transducers and bad environment
本文件规范了气流传感器的范围、术语和定义、技术要求、试验方法、检验规则、标志、包装、运输及贮存。 本文件适用于插针式、贴片式、引线式类气流传感器。本产品主要用于电子烟气流传感,用来检查吸烟时的负压转换成输出电压驱动雾化装置
Airflow sensors
This notice should be filed in front of MIL-T-27305C, dated 16 December 1987
TRANSMITTER, RATE OF FLOW
This amendment forms a part of MIL-T-27305C(USAF), dated 16 December 1987, and is approved for use by the Department of the Air Force
TRANSMITTER, RATE OF FLOW
This specification is approved for use within the Department of the Air Force, and is available for use by all Departments and Agencies
TRANSMITTER, RATE OF FLOW
本标准规定了穿孔式直流漏电流传感器(以下简称漏电流传感器)的术语和定义、产品分类、要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于将直流正负馈线间的漏电流变换为直流电压(电流),在测量范围内输出是对应输入的函数的电流传感器。 本标准适用于测量1000mA及以下的直流小电流的漏电流
Direct-current leakage current sensor
本标准规定了射流水流量传感器的术语和定义、产品分类、基本参数、技术要求、试验方法、检验规则、标志、包装、运输和贮存。 本标准适用于低压直流(或电池)供电、脉冲信号输出的封闭满管道射流振荡型水流量传感器(以下简称传感器),也适用于射流冷、热水水表、射流流量计、射流流量变送器等水流量检测仪表中的公称通
Fluidic-oscillator type water flow transducer








