夹头、卡环检测

SNI 05-3692-1995 夹具卡环

Ring for jig and fixture

ASME B5.60a Addenda-2005 卡具夹头: 爪形卡盘; 附录

This document covers the safety requirements for jaw type workholding chucks that are primarily used in turning applications. This Part addresses

Workholding Chucks: Jaw Type Chucks; Addenda

DIN 21389:1988 绳索装置.夹持卡环

The free end of the hoisting rope will be fastened inside of the clamp thimble. Via the clamp thimble the connection to the other parts of the rope

Rope attachments; clamp thimbles

QJ 996.18-1986 车床辅助工具 卡板夹头

CSN 24 2160-1977 扁平双边弹簧夹头卡盘

Zpracovatel: Ná?adí, n. p., Praha, závod Lázně Bělohrad — ?estmír Novák Pracovník ??adu pro normalizaci a mě?ení: Jaroslav Muzika

Compressed double-sided spring collet chucks

JB/T 10119-1999 机床夹具零件及部件.卡环

JB/T 10118-1999 本标准规定了适用于工件直径 5～125mm 的卡环。 本标准于 1983 年以 JB 3393-83 首次发布，于 1991 年第次修订为 GB/T 12884-91

The parts and units of jigs and fixtures.Snap ring

IEEE 1386 and 1386.1-2001 通用夹层卡(CMC)系列和PCI夹层卡(PMC)的物理层和环境层

Provides the parent document for a family of mezzanine cards to be used on single slot VME boards, Multibus boards, desktop computers and other

Common mezzanine card (CMC) family and physical and environmental layers for PCI mezzanine cards (PMC)

HB 2611-1976 卡爪式拉刀夹头 圆拉刀用

HB 2610-1976 卡爪式拉刀夹头 槽拉刀用

DIN 4000-93:2013 事物特性表. 第93部分:夹头, 夹套, 套圈, 膨胀套和卡头

Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads

DIN 4000-93:2006 产品特性表.第93部分:弹簧夹头、夹紧套管和单头卡套

Tabular layouts of properties - Part 93: Collets, Clamping sleeves, Ferrules

QJ/Z 131.40-1984 机床夹具零部件工艺卡片图册 环工艺卡片

JB/T 10118-1999 机床夹具零件及部件.鸡心卡头

JB/T 10118-1999 本标准规定了适用于工件直径 3～130mm 的鸡心卡头。 本标准于 1983 年以 JB 3392-83 首次发布，于 1991 年第次修订为 GB/T 12883-91

The parts and units of jigs and fixtures.Peach-shaped pawl

DIN 2222:1982 钻头夹头锥形轴用锥度环规

Taper ring gauges for taper shafts for drill chucks

Taper ring gauges for taper shafts for drill chucks

QJ/Z 131.39-1984 机床夹具零部件工艺卡片图册 隔离环工艺卡片

SNI 05-3692-1995 夹具卡环

Ring for jig and fixture

ASME B5.60a Addenda-2005 卡具夹头: 爪形卡盘; 附录

This document covers the safety requirements for jaw type workholding chucks that are primarily used in turning applications. This Part addresses

Workholding Chucks: Jaw Type Chucks; Addenda

DIN 21389:1988 绳索装置.夹持卡环

The free end of the hoisting rope will be fastened inside of the clamp thimble. Via the clamp thimble the connection to the other parts of the rope

Rope attachments; clamp thimbles

QJ 996.18-1986 车床辅助工具 卡板夹头

CSN 24 2160-1977 扁平双边弹簧夹头卡盘

Zpracovatel: Ná?adí, n. p., Praha, závod Lázně Bělohrad — ?estmír Novák Pracovník ??adu pro normalizaci a mě?ení: Jaroslav Muzika

Compressed double-sided spring collet chucks

JB/T 10119-1999 机床夹具零件及部件.卡环

JB/T 10118-1999 本标准规定了适用于工件直径 5～125mm 的卡环。 本标准于 1983 年以 JB 3393-83 首次发布，于 1991 年第次修订为 GB/T 12884-91

The parts and units of jigs and fixtures.Snap ring

IEEE 1386 and 1386.1-2001 通用夹层卡(CMC)系列和PCI夹层卡(PMC)的物理层和环境层

Provides the parent document for a family of mezzanine cards to be used on single slot VME boards, Multibus boards, desktop computers and other

Common mezzanine card (CMC) family and physical and environmental layers for PCI mezzanine cards (PMC)

HB 2611-1976 卡爪式拉刀夹头 圆拉刀用

HB 2610-1976 卡爪式拉刀夹头 槽拉刀用

DIN 4000-93:2013 事物特性表. 第93部分:夹头, 夹套, 套圈, 膨胀套和卡头

Tabular layouts of properties - Part 93: Collets, clamping sleeves, ferrules, expanding sleeves and chuck heads

DIN 4000-93:2006 产品特性表.第93部分:弹簧夹头、夹紧套管和单头卡套

Tabular layouts of properties - Part 93: Collets, Clamping sleeves, Ferrules

QJ/Z 131.40-1984 机床夹具零部件工艺卡片图册 环工艺卡片

JB/T 10118-1999 机床夹具零件及部件.鸡心卡头

JB/T 10118-1999 本标准规定了适用于工件直径 3～130mm 的鸡心卡头。 本标准于 1983 年以 JB 3392-83 首次发布，于 1991 年第次修订为 GB/T 12883-91

The parts and units of jigs and fixtures.Peach-shaped pawl

DIN 2222:1982 钻头夹头锥形轴用锥度环规

Taper ring gauges for taper shafts for drill chucks

Taper ring gauges for taper shafts for drill chucks

QJ/Z 131.39-1984 机床夹具零部件工艺卡片图册 隔离环工艺卡片