PCM设备检测

ITU-T G.731-1988 音频用基群PCM复用设备

If channel time slot 16 which is assigned to signalling as covered in Q 5 below is not needed for signalling it may be used for purposes other than

Primary PCM Multiplex Equipment for Voice Frequencies - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 1 pp

ITU-T G.731-1993 音频用基群脉冲编码调制(PCM)复用设备

pulse code modulation (PCM) multiplex equipments are already used in various countries, in particular to provide a large number of short-distance

PRIMARY PCM MULTIPLEX EQUIPMENT FOR VOICE FREQUENCIES

ITU-T G.744-1993 工作在8448kbit/s的二次群脉冲编码调制(PCM)复用设备

SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 8448 kbit/s

GB/T 13994-1992 60路PCM/AD PCM编码转换设备技术要求

本标准规定了60路PCM/ADPCM编码转换设备的接口特性、信令传输、定时同步、监测、维护运用以及其它实现60路编码转换设备所特有的技术要求。 本标准适用于公用网中使用的60路PCM/ADPCM编码转换设备。专用网中使用的60路PCM/ADPCM编码转换设备也应参照采用本标准

Technical requirements for a 60-channel PCM/ADPCM transcoder equipment

ITU-T G.744 FRENCH-1993 工作在8448 kbit/s的二次群脉冲编码调制(PCM)复用设备

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 8448 kbit/s

ITU-T G.732-1993 工作在2048kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 2048 kbit/s

ITU-T G.733-1993 工作在1544kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the μ-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 1544 kbit/s

YD/T 698-1993 60路PCM/ADPCM 编码转换设备测试方法

本标准根据GB/T 13994《60路PCM/ADPCM 编码转换设备的技术要求》制定，规定了60路PCM/ADPCM编码转换设备测试条件和各种技术参数的测试方法。 本标准适用于公用网中使用的60路PCM/ADPCM编码转换设备各项技术性能的测试，专用网中使用的编码转换设备的测试也应参照采用本

Test method for 60-channel PCM/ADPCM transcoder equipment

ITU-T G.744-1988 工作在8448 kbit/s并采用正码速调整的二次群PCM复用设备

A Yes in the table signifies that a certain action should be taken as a consequence of the relevant fault condition. An open space in the table

Second Order PCM Multiplex Equipment Operating at 8448 kbit/s - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 5 pp

ITU-T G.746-1993 工作在6312kbit/s的二次群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the μ-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 6312 kbit/s

ITU-T G.732 FRENCH-1993 工作在2048 kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 2048 kbit/s

ITU-T G.732 SPANISH-1993 工作在2048 kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 2048 kbit/s

ITU-T G.733 FRENCH-1993 工作在1544 kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the µ-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 1544 kbit/s

ITU-T G.746 FRENCH-1993 工作在6312 kbit/s的二次群脉冲编码调制(PCM)复用设备的特性

In some networks the all 0 character signal (00000000) is eliminated to avoid loss of timing information to the digital line, resulting in 254

CHARACTERISTICS OF SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 6312 kbit/s

SMPTE RP 2005-2008 设备与非PCM AES3流的兼容性要求

Requirements for Equipment Compatibility with Non-PCM AES3 Streams

ITU-T G.731-1988 音频用基群PCM复用设备

If channel time slot 16 which is assigned to signalling as covered in Q 5 below is not needed for signalling it may be used for purposes other than

Primary PCM Multiplex Equipment for Voice Frequencies - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 1 pp

ITU-T G.731-1993 音频用基群脉冲编码调制(PCM)复用设备

pulse code modulation (PCM) multiplex equipments are already used in various countries, in particular to provide a large number of short-distance

PRIMARY PCM MULTIPLEX EQUIPMENT FOR VOICE FREQUENCIES

ITU-T G.744-1993 工作在8448kbit/s的二次群脉冲编码调制(PCM)复用设备

SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 8448 kbit/s

GB/T 13994-1992 60路PCM/AD PCM编码转换设备技术要求

本标准规定了60路PCM/ADPCM编码转换设备的接口特性、信令传输、定时同步、监测、维护运用以及其它实现60路编码转换设备所特有的技术要求。 本标准适用于公用网中使用的60路PCM/ADPCM编码转换设备。专用网中使用的60路PCM/ADPCM编码转换设备也应参照采用本标准

Technical requirements for a 60-channel PCM/ADPCM transcoder equipment

ITU-T G.744 FRENCH-1993 工作在8448 kbit/s的二次群脉冲编码调制(PCM)复用设备

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 8448 kbit/s

ITU-T G.732-1993 工作在2048kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 2048 kbit/s

ITU-T G.733-1993 工作在1544kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the μ-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 1544 kbit/s

YD/T 698-1993 60路PCM/ADPCM 编码转换设备测试方法

本标准根据GB/T 13994《60路PCM/ADPCM 编码转换设备的技术要求》制定，规定了60路PCM/ADPCM编码转换设备测试条件和各种技术参数的测试方法。 本标准适用于公用网中使用的60路PCM/ADPCM编码转换设备各项技术性能的测试，专用网中使用的编码转换设备的测试也应参照采用本

Test method for 60-channel PCM/ADPCM transcoder equipment

ITU-T G.744-1988 工作在8448 kbit/s并采用正码速调整的二次群PCM复用设备

A Yes in the table signifies that a certain action should be taken as a consequence of the relevant fault condition. An open space in the table

Second Order PCM Multiplex Equipment Operating at 8448 kbit/s - General Aspects of Digital Transmission Systems; Terminal Equipments (Study Groups XV and XVIII) 5 pp

ITU-T G.746-1993 工作在6312kbit/s的二次群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the μ-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 6312 kbit/s

ITU-T G.732 FRENCH-1993 工作在2048 kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 2048 kbit/s

ITU-T G.732 SPANISH-1993 工作在2048 kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the A-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 2048 kbit/s

ITU-T G.733 FRENCH-1993 工作在1544 kbit/s的基群脉冲编码调制(PCM)复用设备的特性

The encoding law used is the µ-law as specified in Recommendation G.711. The sampling rate, load capacity and the code are also specified

CHARACTERISTICS OF PRIMARY PCM MULTIPLEX EQUIPMENT OPERATING AT 1544 kbit/s

ITU-T G.746 FRENCH-1993 工作在6312 kbit/s的二次群脉冲编码调制(PCM)复用设备的特性

In some networks the all 0 character signal (00000000) is eliminated to avoid loss of timing information to the digital line, resulting in 254

CHARACTERISTICS OF SECOND ORDER PCM MULTIPLEX EQUIPMENT OPERATING AT 6312 kbit/s

SMPTE RP 2005-2008 设备与非PCM AES3流的兼容性要求

Requirements for Equipment Compatibility with Non-PCM AES3 Streams