发布时间:2024-05-27 17:49:26 - 更新时间:2024年06月29日 15:22
点击量:0
Specifies the general performance requirements of all electrical measuring relays and protection equipment, but excludes relays used in the following
Electrical relays; part 6: measuring relays and protection equipment
本部分适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 本部分规定了量度继电器和保护装置的电磁兼容要求。 对于不是由电子电器构成的装置,例如机电式继电器,不要求做本部分规定的试验。 本部分的各项要求适用于新的量度
Electrical relays Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment
GB/T 14598的本部分规定了用于电力系统保护(包括这些系统所用的控制、监视和处理接口设备)的量度继电器和保护装置所产生的射频发射测量的一般要求。它以GB 9254为基础(见附录A)。 本部分规定了可接受的传导和辐射发射的限值,并描述了试验程序。 试验的目的是证实被试
Electrical relays--Part 25: Electromagnetic emission tests for measuring relays and protection equipment
本标准规定了量度继电器和保护装置绝缘配合的一般要求。 本标准特别规范了下述问题: ——术语的定义; ——选择电气间隙和爬电距离的导则,以及与继电器绝缘有关的其他方面的问题; ——对电压试验和绝缘电阻测量的要求。 本标准适用于安装和使用在
Electrical relays.Part 5:Insulation coordination for measuring relays and protection equipment.Requirements and tests
This part of IEC 60255 specifies the general requirements for the measurement of radio-frequency emissions emanating from measuring relays
Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment
Electrical relays - Part 26 : electromagnetic compatibility requirements for measuring relays and protection equipment.
Specifies the requirements for electromagnetic compatibility for measuring relays and protection equipment. Is applicable to measuring relays
Electrical relays - Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment
This International Standard describes the product safety requirements for measuring relays and protection equipment having a rated a.c. voltage up
Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment; Requirements and tests
本部分以IEC 61000-4-16中所描述的概念为基础,参考了该出版物的适用部分,规定了对工频抗扰度试验的一般要求。这些试验适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在其额定频率下(例如16 2
Electrical relays Part 22-7: Electrical disturbance tests for measuring relays and protection equipment Power frequency immunity test
本部分以GB/T 17626.5为基础,参考了该出版物的适用部分规定了对浪涌试验的一般要求。这些试验适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在被激励并受到由开关通断和雷击产生的浪涌电压在电源和互连线路
Electrical relays Part 22-5: Electrical disturbance tests for measuring relays and protection equipment Surge immunity test
IEC 255-22中的第4篇是以IEC 801-4为依据,并引用了该出版物的适用之处。 本标准规定了有输出触点或输出触点的静态量度继电器和保护装置的快速瞬变干扰试验的一般要求。 试验的目的是确认被试装置在被激励并受到类似因电感负载的切断及继电器触点回跳等产生的快速瞬变干扰时
Electrical relays. Part 22: Electrical disturtance tests for measuring relays and protection equipment. Section 4: Fast transient disturbance test
GB/T 14598的本部分以IEC 61000-4-18为基础,参考了该出版物的适用部分,规定了对1MHz和100kHz脉冲群抗扰度试验的一般要求,这些试验适用于电力系统继电保护所用的量度继电器和保护装置。包括与这些设备一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在受到激励,并
Electrical relays.Part 22-1:Electrical disturbance tests for measuring relays and protection equipment.1 MHz burst immunity tests
Electrical relays. Part 22: Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst disturbance tests
GB/T 14598的本部分以GB/T 17626.3为基础,参考该出版物的适用部分,规定了对辐射电磁场骚扰试验的一般要求。这些试验用于电力系统保护所用的量度继电器和保护装置,包括这些系统所用的控制、监视和过程接口设备。 试验的目的是证明被试设备(EUT)在受到激励和处于来自在
Electrical relays--Part 22-3: Electrical disturbance tests for measuring relays and protection equipment-Radiated electromagnetic field disturbance tests
本部分以GB/T 17626.4为基础,参考了该出版物的适用部分,规定了对电快速瞬变抗扰度试验的一般要求。这些试验适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在被激励并受到由诸如感性负载断开、继电器触点回
Electrical relays Part 22-4: Electrical disturbance tests for measuring relays and protection equipment Electrical fast transient/burst immunity test
Specifies the general performance requirements of all electrical measuring relays and protection equipment, but excludes relays used in the following
Electrical relays; part 6: measuring relays and protection equipment
本部分适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 本部分规定了量度继电器和保护装置的电磁兼容要求。 对于不是由电子电器构成的装置,例如机电式继电器,不要求做本部分规定的试验。 本部分的各项要求适用于新的量度
Electrical relays Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment
GB/T 14598的本部分规定了用于电力系统保护(包括这些系统所用的控制、监视和处理接口设备)的量度继电器和保护装置所产生的射频发射测量的一般要求。它以GB 9254为基础(见附录A)。 本部分规定了可接受的传导和辐射发射的限值,并描述了试验程序。 试验的目的是证实被试
Electrical relays--Part 25: Electromagnetic emission tests for measuring relays and protection equipment
本标准规定了量度继电器和保护装置绝缘配合的一般要求。 本标准特别规范了下述问题: ——术语的定义; ——选择电气间隙和爬电距离的导则,以及与继电器绝缘有关的其他方面的问题; ——对电压试验和绝缘电阻测量的要求。 本标准适用于安装和使用在
Electrical relays.Part 5:Insulation coordination for measuring relays and protection equipment.Requirements and tests
This part of IEC 60255 specifies the general requirements for the measurement of radio-frequency emissions emanating from measuring relays
Electrical relays - Part 25: Electromagnetic emission tests for measuring relays and protection equipment
Electrical relays - Part 26 : electromagnetic compatibility requirements for measuring relays and protection equipment.
Specifies the requirements for electromagnetic compatibility for measuring relays and protection equipment. Is applicable to measuring relays
Electrical relays - Part 26: Electromagnetic compatibility requirements for measuring relays and protection equipment
This International Standard describes the product safety requirements for measuring relays and protection equipment having a rated a.c. voltage up
Electrical relays - Part 5: Insulation coordination for measuring relays and protection equipment; Requirements and tests
本部分以IEC 61000-4-16中所描述的概念为基础,参考了该出版物的适用部分,规定了对工频抗扰度试验的一般要求。这些试验适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在其额定频率下(例如16 2
Electrical relays Part 22-7: Electrical disturbance tests for measuring relays and protection equipment Power frequency immunity test
本部分以GB/T 17626.5为基础,参考了该出版物的适用部分规定了对浪涌试验的一般要求。这些试验适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在被激励并受到由开关通断和雷击产生的浪涌电压在电源和互连线路
Electrical relays Part 22-5: Electrical disturbance tests for measuring relays and protection equipment Surge immunity test
IEC 255-22中的第4篇是以IEC 801-4为依据,并引用了该出版物的适用之处。 本标准规定了有输出触点或输出触点的静态量度继电器和保护装置的快速瞬变干扰试验的一般要求。 试验的目的是确认被试装置在被激励并受到类似因电感负载的切断及继电器触点回跳等产生的快速瞬变干扰时
Electrical relays. Part 22: Electrical disturtance tests for measuring relays and protection equipment. Section 4: Fast transient disturbance test
GB/T 14598的本部分以IEC 61000-4-18为基础,参考了该出版物的适用部分,规定了对1MHz和100kHz脉冲群抗扰度试验的一般要求,这些试验适用于电力系统继电保护所用的量度继电器和保护装置。包括与这些设备一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在受到激励,并
Electrical relays.Part 22-1:Electrical disturbance tests for measuring relays and protection equipment.1 MHz burst immunity tests
Electrical relays. Part 22: Electrical disturbance tests for measuring relays and protection equipment. 1 MHz burst disturbance tests
GB/T 14598的本部分以GB/T 17626.3为基础,参考该出版物的适用部分,规定了对辐射电磁场骚扰试验的一般要求。这些试验用于电力系统保护所用的量度继电器和保护装置,包括这些系统所用的控制、监视和过程接口设备。 试验的目的是证明被试设备(EUT)在受到激励和处于来自在
Electrical relays--Part 22-3: Electrical disturbance tests for measuring relays and protection equipment-Radiated electromagnetic field disturbance tests
本部分以GB/T 17626.4为基础,参考了该出版物的适用部分,规定了对电快速瞬变抗扰度试验的一般要求。这些试验适用于电力系统保护所用的量度继电器和保护装置,包括与这些装置一起使用的控制、监视和过程接口设备。 试验的目的是验证被试装置在被激励并受到由诸如感性负载断开、继电器触点回
Electrical relays Part 22-4: Electrical disturbance tests for measuring relays and protection equipment Electrical fast transient/burst immunity test