GB/T 13881-1992 牵引车与挂车之间气制动管连接器
本标准规定了牵引车与挂车之间气制动管连接器的互换性尺寸、安装及标志。 本标准适用于汽车列车装备双管路气压制动系用气制动管连接器。其中一条为供能管路、另一条为控制管路。其他车辆列车亦可参照执行
Pneumatic braking connections between motor vehicles and towed vehicles
GB/T 13881-2019 道路车辆 牵引车与挂车之间气制动管连接器
Road vehicles—Pneumatic braking connections between towing vehicles and trailers
GB/T 41656-2022 道路车辆 尾部安装牵引杆连接器的牵引车与牵引杆挂车间的机械连接 互换性
本文件规定了尾部安装牵引杆连接器的牵引货车与牵引杆挂车机械连接的互换性尺寸要求。 本文件适用于尾部安装牵引杆连接器的牵引货车与牵引杆挂车组成的汽车列车。 本文件不适用于牵引杆连接器安装在牵引货车前下部、安装封闭耦合装置并且可延伸拓展的专用汽车列车。 注:符合本文件要求的汽车列车车型(见附录A)与符合
Road vehicles—Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers—Interchangeability
GB/T 39015.2-2020 道路车辆 牵引车与半挂车之间机械连接互换性 第2部分：低牵引座半挂牵引车与大容积半挂车
GB/T39015 的本部分规定了低牵引座半挂牵引车与大容积半挂车之间机械连接的互换性尺寸、操控尺寸和标记。本部分适用于二轴低牵引座半挂牵引车和与之匹配的半挂车。2 互换性尺寸
Road vehicles—Interchangeability of mechanical couplings between tractors and semi-trailers—Part 2: Low-coupling tractors and high-volume semi-trailers
GB/T 32861-2016 道路车辆 牵引车与挂车之间的电气和气动连接位置
本标准规定了牵引车与挂车之间电气和气制动连接器(以下简称电、气连接器)的安装位置、尺寸、间隙空间以及螺旋管线连接等位置要求。 本标准适用于装有气制动系统和24 V电器设备的、牵引杆连接器后置或前下置的牵引杆挂车列车、中置轴挂车列车和铰接列车
Road vehicles.Location of electrical and pneumatic connections between towing vehicles and trailers
BS AU 138b:2000 牵引车辆、挂车和半挂车气动制动系统.“接触”式连接器
This British Standard specifies the dimensions required for correct mating of "contact" type couplings for connecting the pneumatic braking system
Towing vehicle, trailer and semi-trailer pneumatic braking systems - "Contact" type couplings
GB/T 5053.1-2006 道路车辆.牵引车与挂车之间电连接器.7芯24V标准型(24N)
本部分规定了牵引车与挂车之间24V标称电压的7芯标准型(24N)电连接器的尺寸、应用、试验和要求
Road vehicles.Connectors for the electrical connection of towing and towed vehicles-7-pole connector type 24 N(normal)for vehicles with 24V nominal supply voltage
GB/T 5053.2-2006 道路车辆 牵引车与挂车之间电连接器7芯12v标准型(12N)
本标准规定了牵引车和挂车之间12V标称电压的7芯标准型（12N）电连接器的尺寸、应用、试验和要求
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12N (normal) for vehicles with 12V nominal supply voltage
GB/T 15087-2009 道路车辆.牵引车与牵引杆挂车机械连接装置.强度试验
本标准规定了牵引车牵引装置和与之配套的40mm和50mm牵引杆挂环强度试验的条件和要求
Road vehicles.Drawbar couplings and eyes for hinged drawbars.Strength tests
ISO 8755:1986 商用车辆.牵引车辆和挂车之间机械连接.40mm牵引杆连接器
Commercial road vehicles; Mechanical connections between towing vehicles and trailers; 40 mm drawbar coupling
AS 4177.5:2004 篷车和轻型挂车牵引组件．电气连接件
Specifies the design, construction and performance requirements of electrical connectors, for making detachable electrical connections between motor
Caravan and light trailer towing components - Electrical connectors
BS AU 194:1984 牵引车和挂车之间电气连接件性能规范
Applicable to type 12 and 24 electrical connections, covers insertion and withdrawal forces, current carrying capacity, voltage drop, flash test
Specification for performance of electrical connections between towing vehicles and trailers
DIN 74040:1975 牵引车和挂车的机械连接.挂车用牵引杆、互换性尺寸
Mechanical connections between towing vehicles and trailers; tow bar for traiter; interchangeability dimensions Liasions mécaniques entre camions et
Mechanical connections between towing vehicles and trailers; tow bar for trailer, interchangeability dimensions
GB/T 20717-2006 道路车辆 牵引车和挂车之间的电连接器 24V15芯型
本标准规定了15芯电连接器的尺寸、接点分布、试验及要求，该连接器用于标称电压为24V的牵引车及其挂车之间除制动系统和行驶系外的其他设备的电气连接，还进一步规定了当连接器断开时用于接收和存储插头的存放插座以及7芯和15芯连接器之间的转换装置
Road vehicles Connectors for the electrical connection of towing and towed vehicles 15-pole connector for vehicles with 24V nominal supply voltage
GB/T 4781-1984 牵引车与全挂车的机械连接装置互换性
Mechanical connection between towing vehicle and full trailers for interchangeability
GB/T 13881-1992 牵引车与挂车之间气制动管连接器
本标准规定了牵引车与挂车之间气制动管连接器的互换性尺寸、安装及标志。 本标准适用于汽车列车装备双管路气压制动系用气制动管连接器。其中一条为供能管路、另一条为控制管路。其他车辆列车亦可参照执行
Pneumatic braking connections between motor vehicles and towed vehicles
GB/T 13881-2019 道路车辆 牵引车与挂车之间气制动管连接器
Road vehicles—Pneumatic braking connections between towing vehicles and trailers
GB/T 41656-2022 道路车辆 尾部安装牵引杆连接器的牵引车与牵引杆挂车间的机械连接 互换性
本文件规定了尾部安装牵引杆连接器的牵引货车与牵引杆挂车机械连接的互换性尺寸要求。 本文件适用于尾部安装牵引杆连接器的牵引货车与牵引杆挂车组成的汽车列车。 本文件不适用于牵引杆连接器安装在牵引货车前下部、安装封闭耦合装置并且可延伸拓展的专用汽车列车。 注:符合本文件要求的汽车列车车型(见附录A)与符合
Road vehicles—Mechanical coupling between towing vehicles with rear-mounted coupling and drawbar trailers—Interchangeability
GB/T 39015.2-2020 道路车辆 牵引车与半挂车之间机械连接互换性 第2部分：低牵引座半挂牵引车与大容积半挂车
GB/T39015 的本部分规定了低牵引座半挂牵引车与大容积半挂车之间机械连接的互换性尺寸、操控尺寸和标记。本部分适用于二轴低牵引座半挂牵引车和与之匹配的半挂车。2 互换性尺寸
Road vehicles—Interchangeability of mechanical couplings between tractors and semi-trailers—Part 2: Low-coupling tractors and high-volume semi-trailers
GB/T 32861-2016 道路车辆 牵引车与挂车之间的电气和气动连接位置
本标准规定了牵引车与挂车之间电气和气制动连接器(以下简称电、气连接器)的安装位置、尺寸、间隙空间以及螺旋管线连接等位置要求。 本标准适用于装有气制动系统和24 V电器设备的、牵引杆连接器后置或前下置的牵引杆挂车列车、中置轴挂车列车和铰接列车
Road vehicles.Location of electrical and pneumatic connections between towing vehicles and trailers
BS AU 138b:2000 牵引车辆、挂车和半挂车气动制动系统.“接触”式连接器
This British Standard specifies the dimensions required for correct mating of "contact" type couplings for connecting the pneumatic braking system
Towing vehicle, trailer and semi-trailer pneumatic braking systems - "Contact" type couplings
GB/T 5053.1-2006 道路车辆.牵引车与挂车之间电连接器.7芯24V标准型(24N)
本部分规定了牵引车与挂车之间24V标称电压的7芯标准型(24N)电连接器的尺寸、应用、试验和要求
Road vehicles.Connectors for the electrical connection of towing and towed vehicles-7-pole connector type 24 N(normal)for vehicles with 24V nominal supply voltage
GB/T 5053.2-2006 道路车辆 牵引车与挂车之间电连接器7芯12v标准型(12N)
本标准规定了牵引车和挂车之间12V标称电压的7芯标准型（12N）电连接器的尺寸、应用、试验和要求
Road vehicles Connectors for the electrical connection of towing and towed vehicles 7-pole connector type 12N (normal) for vehicles with 12V nominal supply voltage
GB/T 15087-2009 道路车辆.牵引车与牵引杆挂车机械连接装置.强度试验
本标准规定了牵引车牵引装置和与之配套的40mm和50mm牵引杆挂环强度试验的条件和要求
Road vehicles.Drawbar couplings and eyes for hinged drawbars.Strength tests
ISO 8755:1986 商用车辆.牵引车辆和挂车之间机械连接.40mm牵引杆连接器
Commercial road vehicles; Mechanical connections between towing vehicles and trailers; 40 mm drawbar coupling
AS 4177.5:2004 篷车和轻型挂车牵引组件．电气连接件
Specifies the design, construction and performance requirements of electrical connectors, for making detachable electrical connections between motor
Caravan and light trailer towing components - Electrical connectors
BS AU 194:1984 牵引车和挂车之间电气连接件性能规范
Applicable to type 12 and 24 electrical connections, covers insertion and withdrawal forces, current carrying capacity, voltage drop, flash test
Specification for performance of electrical connections between towing vehicles and trailers
DIN 74040:1975 牵引车和挂车的机械连接.挂车用牵引杆、互换性尺寸
Mechanical connections between towing vehicles and trailers; tow bar for traiter; interchangeability dimensions Liasions mécaniques entre camions et
Mechanical connections between towing vehicles and trailers; tow bar for trailer, interchangeability dimensions
GB/T 20717-2006 道路车辆 牵引车和挂车之间的电连接器 24V15芯型
本标准规定了15芯电连接器的尺寸、接点分布、试验及要求，该连接器用于标称电压为24V的牵引车及其挂车之间除制动系统和行驶系外的其他设备的电气连接，还进一步规定了当连接器断开时用于接收和存储插头的存放插座以及7芯和15芯连接器之间的转换装置
Road vehicles Connectors for the electrical connection of towing and towed vehicles 15-pole connector for vehicles with 24V nominal supply voltage
GB/T 4781-1984 牵引车与全挂车的机械连接装置互换性
Mechanical connection between towing vehicle and full trailers for interchangeability
编辑：北检院编辑部
